• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.17 no.6
• /
• pp.79-82
• /
• 2017

In this paper, we proposed the wireless communication system using millimeter-wave envelope detector. The sub-harmonic mixer based on schottky barrier diode was used in the transmitter. The receiver was used millimeter-wave envelope detector. The transmitter was composed of schottky diode sub-harmonic mixer, frequency tripler, and horn antenna. The receiver was composed of horn antenna, millimeter-wave envelope detector, low pass filter, base band amplifier, and limiting amplifier. At 1.485 Gbps and 300 GHz, the eye-diagram showed a very good performance as measured by the error free. Communication distance is reduced compared to the heterodyne receiver, but compact and lightweight is possible.

• 한국정보통신설비학회:학술대회논문집
• /
• 2004.08a
• /
• pp.226-229
• /
• 2004

본 논문은 초고주파 영역에서 개방 단말 동축선을 대신해서 복소 유전율을 측정할 수 있는 MEMS 프로브와 그 응용예로 MEMS 프로브 어레이를 제안한다. MEMS 프로브는 기존의 동축선 프로브와 달리 커넥터와의 연결이 간단하여 일회용으로 프로브를 사용할 수 있다는 점에서 의료용으로 사용할 수 있는 가능성이 있다. 샘플의 유전율 분포를 구하기 위해서 기존의 센서는 반복 접촉을 요구하고 이로 인한 번거로움과 측정 오차를 줄일 목적으로 MEMS 프로브 어레이를 개발 하였다. MEMS 프로브 어레이는 RF 스위치를 사용하여 다수의 측정 포인트를 한번의 센서 접촉으로 측정할 수 있는 새로운 개념의 프로브이다. 1GHz부터 40GHz까지의 광대역에서 0.9% 식염수의 유전율을 측정하여 MEMS 프로브의 성능을 검증하였다.

• Proceedings of the IEEK Conference
• /
• 2003.07a
• /
• pp.605-608
• /
• 2003

In This paper, the 4$\times$4 microstrip patch array antenna for millimeter-wave is designed and fabricated. Before that, a patch antenna is designed to analyze the property in the millimeter-wave. Also, the excitation is implemented using edge and prove feeding. The array method is used to design the 2x1 array with corporate feeding network. Measured antenna shows 12.77 dBi gain, 37.65 GHz center frequency, -29.78 return loss and 680 MHz band width.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.60 no.12
• /
• pp.2386-2391
• /
• 2011

Tracking and detecting targets by the millimeter wave seeker is affected by moving of platform. In order to perform the tracking performance, stabilization of a millimeter wave seeker which consists of 2-axis gimbals was considered in this study. The feasibility of the analysis and the 2-axis gimbal servo system modeling design were verified along with some simulation results.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.3 no.2 s.5
• /
• pp.85-93
• /
• 2004

In this paper, microstrip stepped-impedance hairpin resonator (SIR) lowpass filter f.PF) by surface rnicromachining on GaAs substrate is sugsested. This filter has the advantages of compact side, easy fabrication, and sharp cutoff frequency response. The new SIR LPF shows the 3 dB passband of dc to 33 GHz, the insertion loss of 0.82 dB, and the return loss of better than 17 dB up to 25.57 GHz. This filter is useful for many microwave system applications.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.7 no.6
• /
• pp.1334-1340
• /
• 2003

In this paper, We have proposed an Heterodyne technique to generate millimeter-wave signal. Microwave signals in cellular broadband mobile communication networks and distributed networks can favorably be generated and distributed by optical techniques. In principle, these techniques have already been investigated for optical control of phase- array antennas, characterization of photo-detector and phase locking of millimeter-wave oscillators and now being applied to wireless communications. The generation and transmission of millimeter-wave radio signals by optical means is of interest for future pico-cell broadband mobile communication system, especially for systems operating at frequencies of 300Hz.

• Proceedings of the Korea Electromagnetic Engineering Society Conference
• /
• 2000.11a
• /
• pp.197-201
• /
• 2000

In this paper, a MMIC(Monolithic Microwave Integrated Circuit) broadband drive amplifier for wireless communication system has designed using active feedback method. The MMIC brodband amplifier was designed using 0.5$\mu\textrm{m}$ MESFET of ETRI library. Simulation results show that gain is 22 dB, and gain flatness ${\pm}$1 dB. Maximum output power 15 dBm and noise figure 2.5 dB in bandwidth 500 MHz ～3.0 GHz. The MMIC Broadband amplifer's chip area is 14mm${\times}$1.4mm.

• Proceedings of the IEEK Conference
• /
• 1999.11a
• /
• pp.151-154
• /
• 1999

In this paper, we showed parasitic effects in the millimeter wave package, and proposed a suppression method of parasitic effects using Si lossy layer. From CB-CPW used as a transmission line of the MIMIC package, PPL mode is generated and this causes the parasitic effects considered from this paper. Parasitic effects caused by PPL mode such as resonance, radiation, and crosstalk in the single and multi-chip package ran affect to the performance of MIMIC seriously. To suppress these parasitic effects, we adapted Si lossy layer $\rho$ . The PPL mode can be suppressed by the lossy layer, and it eliminates the parasitic effects. It is expected that showed results ran be used as luxurious data for design MIMICs and various types of millimeter wave applications.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.62 no.12
• /
• pp.1700-1705
• /
• 2013

A second harmonic millimeter wave oscillator utilizing sub-harmonic injection-synchronization is presented. A 8.7GHz oscillator with MES-FET is designed, and is driven as a harmonic output oscillator at 17.4GHz by means of sub-harmonic injection-synchronization. The oscillator operates as a multiplier as well as a oscillator in this scheme. Adopting this method, a high sable, high frequency millimeter wave source is obtainable even though self-oscillating frequency of an oscillator is relatively low. The range of injection-synchronization is about 26MHz, and is proportional to the input sub-harmonic power. The spectrum analysis of the 2nd harmonic output frequency shows remarkably decreased the phase noise level.

• Proceedings of the KSRS Conference
• /
• 2007.10a
• /
• pp.365-368
• /
• 2007

Millimeter-wave (MMW) imaging radiometer systems have an attractive advantage to obtain an image through low visibility weather conditions such as fog, clouds and light rain compared with visible and infrared imaging systems. Many countries have developed a various kinds of MMW imaging radiometers for the aim of low cost and high performance. In Korea, Millimeter-wave Imaging RAdiometer Equipment (MIRAE) has been developed since the end of 2006. Recently the development of some modules was finished for the test model. This paper describes the design and development of the MIRAE. In addition, the test results of its manufactured modules are presented.