• 한국작물학회지
• /
• 제51권1호
• /
• pp.14-25
• /
• 2006

Response of grain yield and milled-rice protein content to nitrogen (N) rates at various growth stages is critical for quantifying real-time and real-amount of applied N requirement for target grain yield and protein content. An experiment including 10 N rate treatments at transplanting, tillering and panicle initiation stages with four rice cultivars in 2003, 6 N treatments with two rice cultivars in 2004 and 2005 was conducted. Increase of N rates at PIS significantly increased both grain yield and milled-rice protein content but increase of N rates at tillering stage significantly increased grain yield but not milledrice protein content. Therefore, high grain yield and low milled-rice protein content would be difficult to obtain only by adjusting N rates at PIS. Internal N use efficiency (INUE) was 60.5 kg grain/kg N accumulation on an average over N treatments, cultivars, and experimental years, showing considerable reduction especially at high shoot N accumulation in the experimental year of low sunshine duration. Milled-rice protein content tended to increase almost linearly with increasing shoot N accumulation, but it revealed big variation even at the same shoot N accumulation at harvest. Milled-rice protein content decreased with increasing INUE. N accumulation in the milled rice increased at an almost constant proportion of 45.5 percent of the shoot N accumulated at harvest, showing slight decresing proportion with the increasing shoot N accumulation.

• 한국세라믹학회지
• /
• 제35권1호
• /
• pp.66-78
• /
• 1998

the microstructure and mechanical properties of seeded and ball-milled dry gels prepared by boehmite sol-gel method were discussed. The densification of seeded gels was improved with increasing seed content namely the number of seed The number of seed was 1.09, 3.35, 5.72${\times}$1012/cm3 boehmite when seeded with 1, 3, 5wt% respectively The ball milled gel contained about 0.5wt% seed and the number of seed was 4.72${\times}$1012/cm3 boehmite. The sintered density of 5wt% seeded gel was below 80% when sintered at 1300$^{\circ}C$ for 1h. On the other hand that of ball milled gel was very improved and reached to 97% In the case of 3wt% seeded gels the density over 97% was attained when sintered at 1500$^{\circ}C$for 1h. and the grain of the sintered body was several micrometers in size. However the sintered body of ball milled gel showed grain size of submicrometer when sintered at 1300$^{\circ}C$ for 1h. And this specimen showed highest harness value of 1900kg/mm2 The fracture toughness increased with increasing sintering temperature. The sintered body of ball milled gel showed the largest grain size and the highest fracture toughness without regard to sint-ering temperature.

• 한국작물학회지
• /
• 제51권1호
• /
• pp.1-13
• /
• 2006

Response of grain yield and milled-rice protein content to nitrogen topdress (N) timing at panicle initiation stage (PIS) is critical for quantifying real-time N requirement for target grain yield and milled-rice protein content. Two split-split-plot experiments with three replications, one in 2004 and the other in 2005, were conducted in Experimental Farm, Seoul National University, Suwon, Korea. The experiments included three N rates at tillering stage (TS), three N timing treatments at panicle initiation stage (PIS) and two rice cultivars. The N rates at TS, N timing at PIS, and rice cultivars were randomly assigned to main plot, sub plot, and sub-sub plot, respectively. Results showed that the delayed N application at PIS reduced grain yield in 2004 and increased milled-rice protein content in both years significantly at 0.05 probability level. The calculated optimum N timing at PIS from pooled data by N rates and rice cultivars in two years was at 28 days before heading (DBH). However, real-time of N timing at PIS was dependent on plant growth and N status around PIS that in turn was dependent on applied N rates at TS. The optimum N timing at PIS was at 30 DBH for no N treatments at TS while at 27 DBH for 3.6 and 7.2 kg N/10a treatments and at 27 and 29 DBH for Hwaseongbyeo and Daeanbyeo, respectively. In general, earlier applied N at PIS resulted in lower milled-rice protein content but the highest grain yield was expected to be obtained when N topdress at PIS was applied at the time when shoot N concentration started to drop below about 23 mg/g due to dilution effect after transplanting. In conclusion, the results of our experiments imply that the currently recommended N topdress time (24DBH) at PIS in Korea should be reconsidered for the higher grain yield and the better quality of rice.

• Journal of Biosystems Engineering
• /
• 제15권1호
• /
• pp.33-43
• /
• 1990

Spectral reflectance of paddy, brown rice, milled rice, greenish grain, yellow grain and denatured grain were measured over the range of 340 to 820 nm with "Double Beam Spectrophotometer(Model UV-180)". Variation in the reflectance depending on milling degree of milled rice appeared greatest over the range of 420 to 500 nm, and that between white rice and other rice samples appeared greatest near 500 nm. On the basis of the above results, a whiteness meter to measure milling degree of rice was manufactured using tungsten lamp, photodiodes and amplifier, and its performance was compared with the existing whiteness meters (KETT and Z-II optical sensor). There were very high correlations among those whiteness meters.

• Progress in Superconductivity
• /
• 제10권1호
• /
• pp.40-44
• /
• 2008

A combined process of a mechanical ball milling and liquid glycerin ($C_{3}H_{8}O_3$) treatment of boron (B) powder has been conducted to enhance the superconducting properties of $MgB_2$. The individual aims of the mechanical milling and the glycerin treatment were to reduce the grain size of the $MgB_2$ and to achieve homogeneous carbon (C) incorporation into the $MgB_2$, respectively. Four kinds of B powders of as-received, glycerin treated, 2 h milled, and 2 h milled + glycerin treated were prepared. $MgB_2$ bulks were fabricated by in situ process using the prepared B powders. The mechanical ball milling was effective for a grain refinement, and a lattice disorder was easily achieved by glycerin addition. It was found that the critical current density ($J_c$) values were enhanced in the samples with milled B or glycerin treated B only. In the $MgB_2$ bulk prepared with both milled and glycerin treated B, the $J_c$ was further increased due to a higher grain boundary density and a greater C substitution.

• 한국초전도ㆍ저온공학회논문지
• /
• 제23권3호
• /
• pp.45-50
• /
• 2021

In this study, the effect of the size of B powder on the critical current density (J_c) of MgB₂ prepared by an in situ reaction process was investigated. Various combinations of B powders were made using a micron B, ball-milled B and nano B powders. Micron B powder was reduced by ball milling and the milled B powder was mixed with the micron B or nano B powder. The mixing ratios of the milled B and micron or nano B were 100:0, 50:50 and 0:100. Non-milled micron B powder was also mixed with nano powder in the same ratios. Pellets of (2B+Mg) prepared with various B mixing ratios were heat-treated to form MgB₂. T_c of MgB₂ decreased slightly when the milled B was used, whereas the J_c of MgB₂ increased with increasing amount of the milled B or the nano powder. The used of the milled B and nano B power promoted the formation MgB₂ during heat treatment. In addition to the enhanced formation of MgB₂, the use of the powders reduced the grain size of MgB₂. The use of the milled and nano B powder increased the J_c of MgB₂. The highest J_c was achieved when 100% nano B powder was used. The J_c enhancement is attributed to the high volume fraction of the superconducting phase (MgB₂) and the large grain boundaries, which induces the flux pinning at the magnetic fields.

• 한국작물학회지
• /
• 제59권2호
• /
• pp.174-180
• /
• 2014

등숙기 일조부족이 수량 및 수량구성형질, 쌀의 이화학적 특성 및 식미치에 미치는 영향을 분석하고자 자연광을 대비하여 35%, 55% 차광 처리한 결과는 다음과 같다. 1. 등숙기 차광처리에 의해 미품, 호품, 신동진의 등숙률, 현미천립중, 쌀 수량은 감소하였고 차광정도가 클수록 높은 감소율을 보였다. 2. 차광처리시 백미 단백질 함량은 증가하였고 35% 차광보다 55% 차광에서 높았으며, 미품이 호품과 신동진에 비해 단백질 함량의 변화가 적었다. 3. 차광처리시 아밀로스 함량 변화는 없었으나 식미치는 차광정도가 높을수록 감소하였고 미품이 신동진과 호품에 비해 변화가 적었다. 4. 차광에 의해 최고점도, 최저점도, 최종점도 및 강화점도는 낮아지고 호화온도와 치반점도는 높았다.

• 한국작물학회지
• /
• 제37권3호
• /
• pp.244-249
• /
• 1992

벼 품종간 미립 절대밀도의 변이와 그에 영향하는 미립관련형질들을 구명하기 위하여 통일형 30, Japonica형 72 및 Indica형 133 계 235 품종에 대해 미립의 절대밀도와 모양 및 크기, 경도, 심복백, ADV, amylose 함량, 전분구조를 조사하고 그들 간의 관계를 검토한 결과는 다음과 같다. 1. 백미의 절대밀도는 평균적으로 통일형 1.496g/$cm^3$, Japonica형 1.506g/$cm^3$, Indica형 1.500g/$cm^3$이었고, 출수까지의 생육일수 및 현미의 경도와는 정의 상관을 심복백, 현미의 부피 및 1000립중, 입장과는 부의 상관을 보였다. 2. 편회귀분석 결과 미립의 크기가 절대밀도에 가장 크게 영향하는 것으로 나타났다. 3. 절대밀도의 고, 저에 따른 전분결정구조의 차이는 감별할 수 없었으며, 심복백의 경우 정상배유부분에 비해 전분립자가 둥글고 그 결정조직이 느슨하였다. 4. 미립의 크기가 비슷하고 심복백이 없는 경우 절대밀도의 품종간 차이는 미미한 것으로 나타나서 수량성에는 크게 영향하지 못할 것으로 생각되나, 미질의 측면에서는 검토되어져야 할 것이다.

• 한국작물학회지
• /
• 제36권3호
• /
• pp.266-270
• /
• 1991

미곡의 장기보관에서 보관면적과 소요비용을 절약하려면 정조보관보다 현미 또는 백미로 보관하는 것이 용이하다. 그러나 미곡의 고미화와 식미 악화가 우려되어 본 연구에서는 20개월간 정부창고에서 보관된 벼품종들을 정조, 현미, 백미로 가공하고 각각 지대, PP대, PE대에 포장하여 수확 후 32개월째에 발아력, 지방산도, 식미를 검정하였다. 1. 발아율은 장기 보관함에 따라 감소하였고 밀양 2003보다 추청의 감소가 심하였다. 가공상태에 따라 현미로 제현하여 보관하면 발아율 감소가 현저하였고 포장재질에 따른 차이는 없었다. TTC검정도 유사한 경향을 보여 발아력의 간접검정법으로 이용될 수 있었다. 2. 지방산도는 정조<백미<현미 순으로 높아졌고 포장재료에 따라서는 PP대<지대<PE대 순으로 증가되었다. 특히 현미 보관은 지방산도가 KOH 30mg 이상에 달하여 고미화 특성을 보였고 이를 방지하려면 정조를 지대 또는 PP대에 보관하거나 백미는 지대, PP대, PE대에 보관하여 도 무난하였다. 3. 저장미곡의 식미는 도정보관에 따라 악화되었고 특히 현미보관에서 백미보관 보다 불량하였는데 호분층에 포함된 지방의 산패 때문이었다. 또 품종별로 지방산도가 증가함에 따라 식미는 불량하여 졌다.

• Journal of Magnetics
• /
• 제20권1호
• /
• pp.21-25
• /
• 2015

Fine Nd-Fe-B-type particles were prepared by ball milling of different types of Nd-Fe-B precursor materials, such as die-upset magnet, HDDR-treated material, and sintered magnets. Coercivity dependence on the grain and particle size of the powder was investigated. Coercivity of the milled particles was reduced as the particle size decreased, and the extent of coercivity loss was dependent upon the precursor material. Coercivity loss in the finely milled particles was attributed to the surface oxidation. The extent of coercivity loss in the fine particles was closely linked to grain size of the precursor materials. Coercivity loss was more profound for the fine particles with larger grain size. Contrary to the fine particles from the sintered magnets with larger grain size the fine particles (~10 um) from the die-upset magnet and HDDR-treated material with much finer grain size still retained high coercivity (> 10 kOe for die-upset magnet, > 4 kOe for HDDR-treated material).