• Applied Biological Chemistry
• /
• v.27 no.3
• /
• pp.204-210
• /
• 1984

Hydration of twelve japonica (j) and nine j x indica rice varieties was analyzed in terms of mathematical rate equation and a tentative classification of milled rice was attempted primarily on the basis of water uptake race of rice grain at room temperature. No two rice varieties had the same water uptake rate or diffusion coefficient. The rice samples could be classified into three groups. Rices which are considered as having good eating quality had lower water uptake rate.

• Proceedings of the Korean Society of Crop Science Conference
• /
• 2017.06a
• /
• pp.310-310
• /
• 2017

'Gawaji 1', an early maturing and low amylose content rice variety adaptable to double cropping system with barley as later winter crop., was developed by the crop breeding team of Crop Research Division, GARES, Hwaseong, Korea in 2016. 'Gawaji 1' was derived from a cross between 'Baegjinju' and 'Sangmibyeo' in 2004. This variety had heading date of August 4 in Gyeonggi Province. It had a semi-elect plant type and resistance to lodging with strong culm. Its culm length was 67 cm. This variety had 15 tillers per hill and 104 spikelets per panicle. It was medium grain variety showing 1,000 grain weight of brown rice of 19.3g. Its protein contents of milled rice was 8.2% which was lower than 'Baegjinju'. Its milling ratio was 75.5% which was higher than 'Baegjinju'. The yield of milled rice was 5.0 MT/ha under the ordinary culture of the local adaptability test in 3 areas of Gyeonggi Province for three years. 'Gawaji1' is highly adaptable to Gyeonggi Province, especially to northern region of Han River.

• Proceedings of the Korean Society of Crop Science Conference
• /
• 2017.06a
• /
• pp.276-276
• /
• 2017

This study was examined to establish a conditions for producing Tteokbokki using dry-milling rice flour which can save manpower and labor time. Since the cost of producing rice flour milled in a wet condition is 500 to 700 won/kg, which is more than twice as much as that of 300 won wheat flour, it is necessary to directly make rice flour from raw rice. The dry-milling rice flour used in the experiment was produced by Air mill (Nara machinary co. ltd., Tokyo, Japan) from 5 rice cultivars (Samkwang, Dasan-1, Boramchan, Seolgaeng, Hanareum-2), which were cultivated in A-san in 2015 year. Their particle sizes were 50, 100 and $150{\mu}m$ for each cultivar, respectively. A control was a wet-milled rice flour milled with a roll mill after the rice was soaked in water for 4 hours. The moisture content of dry-milling rice flour based on cultivars was 11 ~ 12%, and added water up to 50~55% of dry-milling rice flour weight. The RVA characteristic of peak viscosity was the highest in Dasan-1 and Hanareum-2, the lowest in Seolgaeng. The setback value used as an indicator of aging was the highest in Dasan-1, therefore Dasan-1 was expected to be quick solidification, resulting in the low tendency of sensory evaluation. The damaged starch was high in Dasan-1 and Boramchan (p<0.05) compared to others. The Hunter color L were no significant among cultivars and b value increased in all cultivars of dry-milling rice flour compared with control. The hardness of dry-milling rice flour was higher than that of the control, especially Dasan-1 and Hanareum-2 were the highest. Based on the sensory evaluation, the best cultivars were Boramchan, Hanareum-2 and Samkwang. The overall preference of dry-milling rice flour was good in particle size of 50~100um.

• Korean Journal of Food Science and Technology
• /
• v.50 no.5
• /
• pp.492-498
• /
• 2018

The current study investigated the effect of rice cultivars (Samkwang and Seolgaeng) and milling methods on various characteristics of rice bread. In dry milling, all component characteristics, except the water solubility index, were higher. In terms of the morphology of starch, Samkwang exhibited an angular shape, while Seolgaeng exhibited a round shape. Wet milled flour yielded fine polygonal starch compared to dry milled flour. In regard to the quality characteristics of bread, both wet milled Samkwang and dry milled Seolgaeng showed closely similar specific volumes of 2.90 mL/g and 2.86 mL/g, respectively. Hardness was in the range of 555.50 - 597.29 g for Seolgaeng and 776.78 - 823.06 g for Samkwang. Thus, although the flour characteristics were different, dry milled Seolgaeng, the rice flour of which is economical to produce and has baking characteristics similar to that of wheat flour, appears to be preferable.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.28 no.3
• /
• pp.281-284
• /
• 1983

Interrelationship between. certain physicochemical properties of milled rice was investigated. Grain hardness and milling time were correlated with grain dimension. Equilibrium moisture content of rice upon soaking at room temperature showed a high negative correlation with the amylose content. The contents of protein, fat and ash had no relationship with hardness, milling time and equilibrium moisture content.

• Korean Journal of Human Ecology
• /
• v.19 no.1
• /
• pp.191-201
• /
• 2010

This study attempted to examine the application of retrograded starch (RS3) isolated from rice flour into Madeleine which is easy to make, supply enough energy and micro nutrients with adequate drinks, and prevent an adult disease. This could be a popular food to anyone regardless of age and gender who avoid rice and become high value-added, processed rice foods. For this, control Madeleine was made from wheat flour and an experimental one was made from 5 or 10% rice RS3 addition as well as wheat flour. Four different types of rice were produced from Premium Ho-Pyong Rice, that is, dry milled rice flour(RFD), soaked for 8 hours and milled, followed by air-dried rice flour(RFW), rice starch(RST), and retrograded rice starch or enzyme-resistant starch(RS3). The results found were as follows: Proximate compositions were decreased with soaking to make RFW, RST and RS3, compared to RFD. RS3 had the highest L, +a and ${\Delta}E$ with the lowest +b, changing it to a dark color, explaining the need for heat control during processing. At $80^{\circ}C$, the swelling power was shown in the order of RST>RFW>RFD>RS3 and the solubility of RS3 was the highest. There were significant differences in viscosities of peak, trough, cold, breakdown and total setback of all rice samples using RVA (p<0.001). Due to the pH of RS3, the Madeleine batter became acidic (p<.01) and expanded, resulting in more air cells and open texture. With an increasing RS3 level in Madeleine, several textural attributes among 'fresh' and 'stored at room temperature' Madeleine samples were significantly different by using Texture Analyzer. While the addition of RS3 in Madeleine did not significantly affect the sensory evaluation, indicating RS3 isolated from rice as a beneficial ingredient for processed rice products.

• Korean journal of food and cookery science
• /
• v.23 no.6
• /
• pp.908-918
• /
• 2007

To prepare ready-to-use rice flour as de novo material for processed rice foods, glutinous(W) and normal rice grains (N) were soaked for 1, 8, and 12 hours prior to processing. One half (DG) was air-dried and milled, and the other (WG) was milled and air-dried. General, morphological and pasting properties of the flours (NDG, NWG, WDG, WWG) were compared to those of a control (raw milled rice without soaking). The general compositions of the rice flours varied with soaking. Crude ash was considerably decreased at the beginning of soaking (1 hour). With the soaking, the rice flour, having polygonal shaped particles and a layered surface, acquired particles with smooth edges, which were then uniformly distributed. Additionally, the WG flour was lighter and had a lower ${\Delta}E$ value than the DG flour, due to a higher L and less +b as a result of soaking. Compared to the control, the WBC of the normal rice flour was decreased significantly with soaking, and the WG flour had significantly lower WBCs than the DG flour. Stirring number (SN), an indicator of ${\alpha}-amylase$ activity, was highly and significantly correlated with WBC (r=-0.85, p=0.0001) in the normal rice flour. At $80^{\circ}C$, the SP and solubility of all the soaked rice flours were much higher than those of the control. Positive (r=+0.85, p=0.0001) and negative (r=-0.61, p=0.02) correlations between the SP and solubility of the normal and glutinous rice flours were found, respectively. Using RVA, the pasting temperature of NDG was lower than that of NWG (p<0.0001). The peak viscosities of all the soaked flours were significantly decreased with soaking (p<0.0l), with the highest viscosity in the normal rice flour soaked for 8 hrs. Total setback, indicative of retrogradation, was lower in NDG than in NWG, with the lowest setback at 8 hrs of' soaking. Based on these finding, the NDG flour with 8 hrs of soaking was less damaged, and had a lower total setback and lower pasting temperature, which would make it an appropriate rice flour for commercial mass production.

• Korean Journal of Organic Agriculture
• /
• v.26 no.4
• /
• pp.629-647
• /
• 2018

This study was carried out to investigate the economic value of organic rice production using gelatin chitin microorganisms in eco-friendly complex, Gongsan, Naju city. The soil condition of experiment paddy field was Jeonbuk series and silt loam with a slightly poor drainage. Except for the high effective silicate, the chemical characteristics of soils used were included in the optimum range of paddy soils in Korea. In growth, plant length, tiller number, ear number, and ear length were observed to be higher in conventional paddy fields than organic paddy fields. However, number of grain per panicle and grain filling ratio (%) were higher in organic paddy fields than conventional paddy fields. Incidences of diseases and insect pests were slightly higher in the organic paddy fields. Water weevil, sheath blight, rice leaf roller and rice blast were more occurred in organic paddy field. On the other hand, false smut was higher occurred in conventional paddy field. There was a significant negative correlation between rice sheath blight and rice leaf roller, and rice yield. In the milled rice quality, the quality of organically cultivated milled rices was lower by the increase of broken rice than that of conventionally cultivated milled rices. The quality and palatability of rice were higher in organic cultivation with decreasing of protein content. Net income of conventionally and organically cultivated rice was 360,000 won/10a and 610,000 won/10a, respectively. Premium net income of the organically cultivated rice was 68%.

• Journal of Biosystems Engineering
• /
• v.8 no.1
• /
• pp.17-29
• /
• 1983

The milling process is considered as causing one of the greatest grain losses among all the processes in rice post-production. Major source of grain losses in the rice milling is considered as the whitening process. This study was attempted to develop an abrasive-type whitener, the whitening chamber of which being supplied by jet-air evenly and continuously. To investigate the milling performance by the new whitener, three kind of emery-stone grit(#36, #41, and #46), and three levels of rotational speed of emery stone roller (950, 1070, and 1200 rpm) were tested. The jet-air abrasive-type whitener was also compared with the conventional abrasive-type having no jet-air blower in terms of their milling performance. In addition, the effect of different combinations of sequential uses of the abrasive- and friction-type whiteners on the milling performance was also experimentally evaluated. The results of this study are summarized as follows; 1. In general, the whitening system combined with the abrasive type whitener with jet-air supply, which was newly designed, and the existing jet-air friction type whiteners produces more milled- and head-rice by about 0.3% points and 2.8% points, respectively than the system combined with the existing abrasive type without the jet-air supply under the same operational conditions. The former also consumed less electricity by 0.024 KwH per 100kg of milled rice production and gave more milling capacity by about 35 kg/hr. As compared with the conventional whitening system consisting of jet-air friction type whiteners only, the former yielded more milled- and head-rice by 1.5% points and 4.4% points, respectively. 2. The abrasive roller having 46 grit emery was better than the roller having 36 grit in aspects of milling performance and machine efficiency, in general. 3. With regard to the effect of combination method of abrasive type and friction type whiteners, one pass in abrasive type plus three passes in friction type gave better milling performance and energy efficiency than the two passes in abrasive type plus two passes in friction type regardless of the designs of the emery stone rollers. 4. The increase in rotational speed of the emery stone roller from 950 rpm to 1200 rpm presented negative effects on milled and head-rice yields and machine efficiency, but slightly positive effect on milling capacity.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.51 no.spc1
• /
• pp.7-11
• /
• 2006

The grain quality of imported steamed-rice was investigated to improve the competitiveness of domestic .ice (Oryza sativa L.) in low price market. Eight samples of imported steamed-rice were collected during 2004 and 2005, and they were examined in appearances, physicochemical, pasting, cooking qualities and palatability. In the appearance of grain, there were many cracks, which were easily classified, on the surface of steamed-rice. And they had high protein contents, low moisture contents and very low glossiness. We could certain that there was often decolorization process after boiling according to the wide range of whiteness in steamed-rice samples. Amylograms and thermo-grams of the steamed-rice represented that they were at-ready gelatinized. Thus, we could concluded that the steamed-rice absorbed water with meager endothermic reaction and eluted more soluble solid with many breaks of the grain than milled rice during cooking process. From the sensory preference evaluation, the steamed-rice had the lowest scores among milled rice, long stored rice, and broken rice samples on all evaluation items.