• 전력전자학회:학술대회논문집
• /
• 전력전자학회 1998년도 Proceedings ICPE 98 1998 International Conference on Power Electronics
• /
• pp.225-230
• /
• 1998

• 한국군사과학기술학회지
• /
• 제22권1호
• /
• pp.60-71
• /
• 2019

Electrical power supply is needed to operate the radar system in the field. In addition, it should not cause performance deterioration under the environmental factors due to characteristics of military equipment, and should not cause malfunction due to electromagnetic waves generated in radar, and then should not cause malfunction in radar equipment. Therefore, By applying a permanent magnet to the rotor of the generator, light weighting and high efficiency of generator were achieved. As a result, electrical performance test of the generator, the rated output power was 80.8 kW, the maximum output power was 88.1 kW, and the output power efficiency was 98.1 % under the full load condition. When the load capacity of the generator was changed from no load to full load, the maximum voltage variation was 3.6 % and the frequency variation was 0.3 %. As a result of the transient response test for measuring the output power of the generator according to the load characteristics change, the maximum voltage variation of 7.9 %, frequency variation of 0.5 % were confirmed, and the transient response time was 2.1 seconds. Environmental tests were conducted in accordance with MIL-STD-810G and MIL-STD-461F to evaluate the operability of the generator groups. Normal operation of radar system generator group was confirmed under high temperature and low temperature environment conditions. Electromagnetic tests were conducted to check if electromagnetic wave generated from both radar system and generator group in operation caused any performance deterioration to each other. As a result, it was confirmed that the performance deterioration due to electromagnetic wave inflow, radiation, and conduction did not occur. It is expected that it should be possible to provide high efficiency power supply and stable power supply by applying to various military system as well as radar system.

• 국방과기술
• /
• 3호통권145호
• /
• pp.44-57
• /
• 1991

이 글은 미 국방부가 소련 전력을 분석하는 자료로서 발간하는 1990년판에서 발췌한 내용입니다. 는 1981년부터 해마다 발행되어 현재 제9판까지 나왔으며, 소련군의 현황과 기술수준 및 교리, 전투능력등을 상세하게 평가하고 있습니다. 또한 이 자료는 미국 등 서방세계에서 뿐만 아니라 소련에서도 자체적인 참고자료로 삼을만큼 신빙성과 권위를 갖고 있으며, 소련이 전례없는 외교.정치적인 격변을 겪고 있는 요즈음 자료로서의 가치가 더욱 높아가고 있습니다. 미 국방부는 이와함께 <핵심기술계획(Critical Technologies Plan)>을 1989년부터 발행(본 지90/12월호 참조)하고 있습니다

• 한국음향학회지
• /
• 제4권2호
• /
• pp.3.2-3.2
• /
• 1985

본 논문은 전 전자식 교환기에 사용되는 MFC 수신기를 설계하기 위해서 FIR-Filter를 사용한 논문이다. FIR-filter를 설계함에 있어서, Remetz Algorithm을 사용한 Mellellan의 방식이 적용되었으며 인접주파수를 정확히 구분하기 위하여 85차의 고차필터를 설계하였고, 필터의 출력 데이터 15개의 합으 로써 각 주파수에 대한 판별값으로 정하였다. 인접 주파수를 구분하는 출력 power의 결과는 최근의 FGT-MFC 수신기의 출력 power의 결과와 비교 하였을 때, S/N 비면에서 5dB 이상의 향상을 보였으 며, 133개의 입력데이타를 사용하는 FGT-MFC 수신기보다 4.2ms 빠른 응답특성을 나타냈다.

• 제어로봇시스템학회논문지
• /
• 제20권9호
• /
• pp.964-970
• /
• 2014

In this study we have developed an anthropomorphic robot hand and arm by using tendon-tubes which can be used for people's everyday life as a robot's dynamic power transmission device. Most previous robot hands or arms had critical problem on dynamic optimization due to heavy weight of power transmission parts which placed on robot's finger area or arm area. In order to resolve this problem we designed light-weighted robot hand and arm by using tendon-tubes which were consisted of many articulations and links just like human's hand and arm. The most prominent property of this robot hand and arm is reduction of the weight of robot's power transmission part. Reduction of weight of robot's power transmission parts will allow us to develop energy saving and past moving robot hands and arms which can be used for artificial arms. As a first step for real development in this study we showed structural design and demonstration of simulation of possibility of a robot hand and arm by tendon-tube. In the future research we are planning to verify practicality of the robot hand and arm by applying sensing and controlling method to a specimen.

• 한국군사과학기술학회지
• /
• 제24권6호
• /
• pp.569-576
• /
• 2021

Radar is a ground defense system that detects enemy aircraft and receives power from a mobile power supply in an emergency. Serious problems may occur if the equipment is damaged by impact during transportation for use. The US military standard MIL-STD-810H contains information on environmental tests such as shock and vibration applied to munitions. Therefore, in this study, the transient analysis of ANSYS 19.2 was performed using the impact data specified in MIL-STD-810H as an input value. Through this, the maximum stress generated in the impact environment of the mobile power supply container was derived, and the safety margin was calculated to confirm the reliability of the container.

• 한국군사과학기술학회지
• /
• 제11권6호
• /
• pp.148-155
• /
• 2008

We investigated the damage effects of microcontroller devices under high power electromagnetic(HPEM) wave. HPEM wave was radiated from the open-ended standard rectangular waveguide(WR-340) to free space. The influence of different reset-, clock-, data-, and power supply-line lengths has been tested. The susceptibility of the tested microcontroller devices was in general much influenced by clock-, reset-, and power supply-line length, little influenced by data-line length. Further the line length was increased, the malfunction threshold was decreased as expected, because more energy couples to the devices. The surfaces of the destroyed microcontroller devices were removed and the chip conditions were investigated with microscope. The microscopic analysis of the damaged devices showed component and bondwire destructions such as breakthroughs and melting due to thermal effects.

• 한국군사과학기술학회지
• /
• 제11권3호
• /
• pp.146-153
• /
• 2008

High-power communication jammer has to include the switched filter bank to eliminate the harmonic signals generated by amplifier. Generally, the switched filter bank consists of in-out switches and several filters. This paper describes the design of high-power switched filter bank, particularly the high-power filter bank operating over 20$\sim$110MHz frequency range. The filters designed have insertion loss less than 0.3dB, VSWR less than 1.25:1, and harmonic suppression more than 35dB. Also, the switched filter bank can endure upto 2kW high-power signal with very low harmonic level within $30{\mu}s$ switching speed.

• 한국군사과학기술학회지
• /
• 제13권3호
• /
• pp.358-364
• /
• 2010

The necessity for harmonically growing of economy and environment has been on the rise late in the twentieth century. Green transformation is defined as efficiency enhancement of conventional guns and ammunitions. We also define green innovation as evolution of fire power systems breaking with conventional methodology. This kind of green innovation could even change a paradigm of warfare in the future. In this paper, we classify the green technology in the field of fire power into five technological groups, and the research and development trend of green technology in the field of fire power is analyzed.

• 한국군사과학기술학회지
• /
• 제15권6호
• /
• pp.761-769
• /
• 2012

In this paper, we propose a low-power design strategy to minimize energy-consumption for surveillance and reconnaissance sensor networks. The sensor network consists of many different nodes with various operations such as target detection, packet relay, video monitoring, changing protocols, and etc. Each sensor node consists of sensing, computing, communication, and power components. These components are integrated on a single or multiple boards. Therefore, the power consumption of each component can be different on various operation types. First, we identified the list of components and measured power consumption for them from the first prototype nodes. Next, we focus on which components are the main sources of energy consumption. We propose many energy-efficient approaches to reduce energy consumption for each operation type.