• Corrosion Science and Technology
• /
• v.2 no.3
• /
• pp.117-126
• /
• 2003

Due to excellent corrosion resistance and mechanical properties, austenitic stainless steel is widely used as the material for chemical plants. nuclear power plants, and food processing facilities. But, the zone affected by heat in the range of 400 to $800^{\circ}C$ during welding loses corrosion resistance and tensile strength since Cr-carbide precipitation like $Cr_{23}C_6$ forms at the grain boundary and thereby takes place the intergranular corrosion. In this study, AISI 304 stainless steel with the added Nb of 0.3 to 0.7 wt% was solutionized at $1050^{\circ}C$ and sensitized at $650^{\circ}C$. Specimen was welded by MIG. The phase and the microstructure of the specimens were examined by an optical microscope, a scanning electron microscope, and a x-ray diffractometer. The corrosion characteristics of specimens were tested by electrolytic etching and by double loop electrochemical potentiokinetic reactivation method(EPR) in the mixed solution of 0.5M $H_2SO_4$ + 0.01M KSCN. The melting zone had dendritic structure constituted of austenitic phase and $\delta$-ferrite phase. Cr carbide at the matrix did not appear, as Nb content increased. At the grain boundaries of the heat affected zone, the precipitates decreased and the twins appeared. The hardness increased, as Nb content increased. The hardness was highest in the order of the heat affected zone>melted zone>matrix. According to EPR curve, as the Nb content decreased, the reactivation current density(Ir) and the activation current density(la) were highest in the order of the melted zone

• Journal of Bio-Environment Control
• /
• v.15 no.4
• /
• pp.421-427
• /
• 2006

To investigate the relationships among the traits related seed dormancy in rice, viviparous germination, dry-heat tolerance and seed longevity were tested using 164 M/G RILs ($F_{17}$) derived from the cross between Milyang 23 (Indica/Japonica) and Gihobyeo (Japonica). At 40 days after heading, the viviparous germination rates of Milyang 23 and Gihobyeo were 0.0 and 7.0%, respectively. The averaged viviparous germination rate of 164 MIG RILs was 3.2%, and their range was from 0.0 to 50.9%. In dry-heat treatment at $90^{\circ}C$ for 24 h followed by the pre-drying at $40^{\circ}C$ for 2 days, Milyang 23 showed higher germinability (98.6%,2.7 days to $T_{50}$) than Gihobyeo (37.6%, 12.9 days to $T_{50}$), and the mean germination rate of 164 M/G RILs was 72.4%. In 54 months after harvest, the germinability in Milyang 23 and Gihobyeo were 90% and 0%, and 71 lines among 164 M/G RILs showed the germinability over 90%. The relationship between seed longevity and dry-heat tolerance was linearly correlated with high positive correlation coefficient. The relationships between seed longevity and viviparous germination, and viviparous germination and dry-heat tolerance were linearly correlated with high negative correlation coefficient. Milyang 23 had higher tolerance against high dry-heat, viviparous germination and long-term storage than Gihobyeo, and 164 M/G RILs showed the medium values of parents.

• The Korean Journal of Soil Zoology
• /
• v.5 no.2
• /
• pp.47-62
• /
• 2000

This study investigated the effect of soil animals at forest fire area, and it carried out the mountain located at Jundae Ri, Houeng-chen Myen, Ha-dong Gun, Kyoung-Nam Province, southern part of Korea, where burned out about 50 hectars on April 11, 1997. Vegetation of the examined area absolutely dominated with the pines of 7-14 cm in diameter and 20 to 30 years old and the rest were covered with mixed forest with a shrub such as the oak (Quereus mongolia Fisch, Quereus variabilis BI, Quereus dentana Thunb), snowbell(Styrax japonica, S, et, z), lacquer tree (Rhus trichocarpa Mig), azalea (Rhododendron mucronulatum Turcz), etc. And there were simple area organized as a herbaceous plant, and the burnt area was poor experimental sites, where litter layer and herbaceous plant disappeard due to fire, and the unburnt area was rich in surface plant, dead leaves, twigs, etc. But the ground cover vegetations were poor in the unburnt area. The distribution of each animal groups, the seasonal fluctuation in population density, the biomass of meso$.$macroarthropods and the relationship between soil animal and some environmental factors were investigated and analyzed at each experimental area. The result are summarized as follow: 1. Identificated 257,087 individuals of soil microarthropods were classified into 7 classes and 24 orders of Arachinida, Insecta, Chilopoda, Symphyla, Diplopoda, Isopoda and Oligochaeta., and identified 8,006 individuals of the total meso$.$macroarthropods were classified into 7 classes and 20 orders of Arachinida, Insecta, Chilopoda, Symphyla, Diplopoda, Isopoda and Oligochaeta. 2. Among the total soil microarthropods, Arachinida formed 70.9%, followed by Insecta for 28.4% and among the total meso$.$macroarthropod , Insecta formed 57.6%, followed by Chilopoda for 23.8%.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.9 no.1
• /
• pp.56-72
• /
• 1999

Airborne concentrations of welding fumes in which 13 different metals such as Al, Cd, Cr, Cu, Fe, Mn, Mo, Ni, Pb, Si, Sn, Ti, and Zn were analyzed were measured at 18 factories including automobile assembly and manufactures, steel heavy industries and shipyards. Air samples were collected by personal sampler at each worker's worksite(n=339). Blood levels of Cd, Cu, Fe, Mn, Pb and Zn were also measured from samples taken from 447 welders by atomic absorption spectrometry and compared with control values obtained from 127 non-exposed workers. The results were as follows ; 1. Among various welding types, $CO_2$ welding 70.2 % were widely used, shielded metal arc welding(SMAW) 22.1 % came next, and rest of them were metal inert gas(MIG) welding, submerged arc welding(SAW), spot welding(SPOT) and tungsten inert gas(TIG) welding. 2. Welding fume concentration was $0.92mg/m^3$($0.02{\sim}15.33mg/m^3$) at automobile assembly and manufactures, $4.10mg/m^3$($0.02{\sim}70.75mg/m^3$) at steel heavy industries and $5.59mg/m^3$($0.30{\sim}91.16mg/m^3$) at shipyards, respectively, showing significant difference among industry types. Workers exposed to high concentration of welding fumes above Korean Permissible Exposure Limit(KPEL) amounted to 7.9 % and 12.5 %, in $CO_2$ welding and in SMAW at automobile assembly and manufactures and 62.7 % in $CO_2$ welding, and 12.5 % in SMAW at shipyards, and 66.2 % in $CO_2$ welding and 70.6 % in SMAW at steel heavy industries. 3. Geometric mean of airborne concentration of each metal released from welding fumes was below one 10th of KPEL in all welding types. Percentage of workers, however, exposed to airborne concentration of metals above KPEL amounted to 16.8 % in Mn and 7.6 % in Fe in $CO_2$ welding; 37.5 % in Cu in SAW, 30 % in Cu in TIG; and 25 % in Pb in SPOT welding. As a whole, 76 Workers(22.4%) were exposed to high concentration of any of the metals above KPEL. 4. There were differences in airborne concentration of metals such as Al, Cd, Cr, Cu. Fe. Mn, Mo, Ni, Pb, Si, Sn, Ti and Zn by industry types. These concentrations were higher in shipyards and steel heavy industries than in automobile assembly and manufactures. Workers exposed to higher concentration of Pb above KPEI amounted to 7.4 % of workers(7/94) in automobile assembly and manufactures. In shipyards, 19.2 % of workers(19/99) were over-exposed to Mn and 7.1 % (7/99) to Fe above KPEL. In steel heavy industries, 14.4 %(21/146), 7.5 %(11/146) and 13 %(19/146) were over-exposed to Mn, Fe and Cu, respectively. As a whole, 76 out of 339 workers(22.4%) were exposed to any of the metals above KPEL. 5. Blood levels of Cd, Cu, Fe, Mn, Pb, and Zn in welders were $0.11{\mu}g/100m{\ell}$, $0.84{\mu}g/m{\ell}$, $424.4{\mu}g/m{\ell}$, $1.26{\mu}g/100m{\ell}$, $5.01{\mu}g/100m{\ell}$ and $5.68{\mu}g/m{\ell}$, respectively, in contrast to $0.09{\mu}g/100m{\ell}$, $0.70{\mu}g/m{\ell}$, $477.2{\mu}g/m{\ell}$, $0.73{\mu}g/100m{\ell}$, $3.14{\mu}g/100m{\ell}$ and $6.15{\mu}g/m{\ell}$ in non-exposed control groups, showing significantly higher values in welders but Fe and Zn.

• Korean Journal of Medicinal Crop Science
• /
• v.16 no.5
• /
• pp.356-370
• /
• 2008

This study was conducted for screening on antioxidant activity of 429 plants and selecting new potential antioxidant candidates. In vitro test models such as scavenging activity on DPPH radical and inhibitory activity on linoleic acid oxidation were used in the preliminary study. Flower of Sanguisorba officinalis, flower of Sedum kamtschaticum, flower of Rumex obtusifolius, and root of Sedum kamtschaticum showed very effective antioxidant activity on DPPH radical and linoleic acid oxidation. Those plants showed 8.1, 9.4, 9.9, $11{\mu}g/ml$ in DPPH radical scavenging activity as $SC_{50}$ and did 80.4, 80.1, 84.5, 88.0% in inhibition activity on linoleic acid oxidation, respectively. Root of Sedum middendorfianum M. showed positive effects in superoxide radical scavenging activity ($38.4{\mu}g/ml$) and inhibitory effect on $CuSO_4$-induced LDL oxidation (53.8% at final concentration of $1{\mu}g/ml$). Gleditsia japonica Mig. showed high antioxidant activity on LDL oxidation as 71.6% at final concentration of $1{\mu}g/ml$ and total phenol content of 958.5 mg% as tannic acid equivalent. In conclusion, we think that these plants having potent antioxidant activity might be studied further and could be used as new resources for many purposes including healthy food, functional cosmetics and drug development etc.