• Journal of the Korean Institute of Navigation
• /
• v.13 no.2
• /
• pp.75-95
• /
• 1989

The study presents the optimum design of B/C midship structure based on the classification society's Rule. The SUMT (Sequential Unconstrained Minimization Technique), using the Direct Search Methods (Hooke and Jeeves, Simplex) is applied to the solution of this nonlinear optimum design problem with constraints. Through the optimum designs of existing ships(60k, 186k, 220k), the amount 0.45-6.18% in weight of their midship structures are obtained on the viewpoint of minimum weight design.

• Journal of the Society of Naval Architects of Korea
• /
• v.38 no.4
• /
• pp.56-65
• /
• 2001

The structural model of midship section is within the scope of STEP AP218. It supports to represent the ship structure, but most of shipyards and classification societies exchange the information using 2D drawings at the present. To translate the 2D information into the ship structure model of STEP AP218, we analyze the 2D midship section information of KR-TRAS of Korean Register of shipping, and include the transverse members information with the 3D model. We also define the mapping table and the mapping relationships between two data structures. With this mapping table we develop the translator for the midship section, and visualize the translated ship structure model using a STEP viewer. The ship structure model can be used to exchange information between design departments, and through the lifecycle of design, analysis, and maintenance.

• Bulletin of the Society of Naval Architects of Korea
• /
• v.17 no.4
• /
• pp.46-54
• /
• 1980

The ship structural design problem is formulated as a general nonlinear optimization problem with constraints. Characteristics of the general structural problems and various optimization techniques are discussed, with special emphasis on penalty function method for constrained problems. A simple example of the solution of a midship structure design of cargo vessel, which complies with the rules of the Korean Register of Shipping is shown using SUMT-exterior method with some search methods.

• Korean Journal of Computational Design and Engineering
• /
• v.2 no.2
• /
• pp.77-84
• /
• 1997

This paper is concerning the development of multiple neural networks system of problem domains where the complete input space can be decomposed into several different regions, and these are known prior to training neural networks. We will adopt oblique decision tree to represent the divided input space and sel ect an appropriate subnetworks, each of which is trained over a different region of input space. The overall architecture of multiple neural networks system, called the federated architecture, consists of a facilitator, normal subnetworks, and tile networks. The role of a facilitator is to choose the subnetwork that is suitable for the given input data using information obtained from decision tree. However, if input data is close enough to the boundaries of regions, there is a large possibility of selecting the invalid subnetwork due to the incorrect prediction of decision tree. When such a situation is encountered, the facilitator selects a tile network that is trained closely to the boundaries of partitioned input space, instead of a normal subnetwork. In this way, it is possible to reduce the large error of neural networks at zones close to borders of regions. The validation of our approach is examined and verified by applying the federated neural networks system to the configuration design of a midship structure.

• Journal of Ocean Engineering and Technology
• /
• v.33 no.4
• /
• pp.322-329
• /
• 2019

The magnitude of the roll motion of a floating structure depends on the roll damping acting on the body. In other words, the roll damping of a floating structure must be accurately obtained in order to precisely evaluate the roll motion. Various methods are used to evaluate the roll damping of a floating structure, such as the linear potential theory, computational fluid dynamics (CFD), and model tests. However, it is difficult to evaluate the roll motion of a floating structure with appendages such as a bilge keel and riser slot due to the limitation of ignoring the viscous effects in the linear potential theory. Among these methods, a model test based on a free decay test and harmonic excited roll motion (HERM) is known to be the most reliable method to estimate the roll damping of the floating structures. In this study, model tests using free decay and HERM techniques were performed in the Ocean Engineering Basin (OEB) of KRISO with various types of midship sections. The roll damping results were estimated based on post-processing methods using both techniques, and the roll damping results were compared.

• Journal of the Society of Disaster Information
• /
• v.7 no.1
• /
• pp.75-85
• /
• 2011

In this study, the behavior were analyzed for the bow collision event. The model of protective Structure was consist of slab, RCP and non-linear soil spring. The ship was modeled by bow and midship. The bow model was composed by elastic-plastic shell elements, and the midship was composed by elastic solid element. According to the weight of the ship's change from DWT 10000 until DWT 25000 increments 5000. The head-on collision was assumed, its speed was 5knot. Analysis was carried out ABAQUS/Explicit. As the result, increasing the weight of the ship deformability in athletes and to increase the amount of energy dissipated by the plastic could be confirmed.

• Journal of the Society of Naval Architects of Korea
• /
• v.40 no.6
• /
• pp.58-68
• /
• 2003

Despite the availability of 3D CAD systems, the designers in shipyards still use 2D CAD systems because of the need to produce drawings rapidly and a shortage of labor. The design information of ship structure contained in 2D drawings is represented by symbols that are well known among designers in shipyard. The shapes of symbols are recognized by analysis of experienced and knowledgeable designers. We propose a method for automatic recognition of 2D symbols and extraction of design information from the midship drawings. The shape and rationale of 20 symbols used in ship design have been analyzed, and symbols have been classified according to the analysis. Based on the classified symbols, the developed system recognizes the symbols expressed in 2D drawings. The meaningless geometric shape is translated into the design information including designer's intents. The extracted design data can be applied to the downstream design process in shipyards, and the 3D ship model can be automatically created.

• Journal of the Society of Naval Architects of Korea
• /
• v.33 no.1
• /
• pp.135-144
• /
• 1996

In this article, an Expert System for MIDship section design(ESMID) is developed based on a general-purpose expert system shell. The system focuses on the integration of knowledge-based system and design resources such as an engineering database, graphical user interface, and engineering application program for the calculation of section modulus and longitudinal strength of ship structure. The validation of the ESMID system was examined and verified by applying the system to the 64K bulk carrier. The developed expert system can help a novice engineer in designing the midship section of ship.

• Journal of Ocean Engineering and Technology
• /
• v.12 no.3 s.29
• /
• pp.86-95
• /
• 1998

CAD/CAM program developers have made substantial progress in enabling engineers to design, analyze, visualize, visualize, and simulate the performance of structures and systems. Many researchers, however, agree that there is still a way to go before the existing commercial computer software can be used in ship structural analysis to their full potential as solvers which can identify opportunities to reduce man-hours and cut costs. CAD systems used for these works in ship yards are general-purposed and not custom-tailored for ship structures, which force end-users to do tiresome and routine works. The new preprocessor "MeshGen" announced in this study can load several ship types and user-friendly generate their FE meshes employing the object-oriented approach based on the parametric and top-down design. Also "MeshGen" reduces dramatically the time required to prepare CAD models under window-based environments on desktop personal computers and makes it much easier and faster for end-users to change topology and material properties.

• Journal of the Society of Naval Architects of Korea
• /
• v.28 no.2
• /
• pp.12-20
• /
• 1991

The informations of ship structural design have been represented as the form various drawing plants, but to enhance the design productivity, it is necessary to utilize the advanced technologies such as CAD system and database management system. In this study, efforts are focused on the data modelling of those informations of midship configuration and attribute for the integration of ship structural design programs through database system. As actual example, midship configuration of bulk carrier was visualized by computer graphics. Relational data model is employed and topological informations is used for the best treatment of geometries representing structural arrangement. RDBMS 'ORACLE' was used for the implementation of the results.