• 제목/요약/키워드: Midline

검색결과 564건 처리시간 0.026초

Talairach 좌표계를 이용한 뇌자기공명영상의 반자동 정합법 (Semi-Automatic Registration of Brain M Images Based On Talairach Reference System)

  • 한예지;박현욱
    • 전자공학회논문지SC
    • /
    • 제41권1호
    • /
    • pp.55-62
    • /
    • 2004
  • 이 논문은 뇌 자기 공명 영상을 Talairach 좌표계에 맞추어 반자동적으로 정합시키기 위한 방법을 제시한다. 뇌영상을 Talairach 좌표계로 변환시키기 위해서는 anterior commissure (AC), posterior commissure (PC), 최 전방점 (AP), 최 후방점 (PP), 최고점 (SP), 최저점(IP), 좌측점 (LP), 우측점 (RP)을 정해주고, 뇌의 회전각을 구하기 위해서 좌뇌와 우뇌의 가운데를 지나는 선을 지정해 준다. 이때 제안한 방법을 쓰면 뇌를 좀더 쉽고 안정된 방법으로 정합할 수 있게 된다. 이 논문에서는 일단 뇌의 midsagittal plane을 추출해 내기 위해 사용자가 axial, coronal 방향에서 각각 두 개씩의 점을 지정해준다. 이후 원형정합을 이용하여 Corpus Callosum의 대강의 위치를 찾아내고 다음 단계에서 그 주변의 영역에 대한 원형정합을 통하여 정확한 AC와 PC의 위치를 찾아낸다. 마지막으로 단면의 밝기 정보를 이용하여 뇌의 경계를 이루는 나머지 점들을 찾을 수 있는데 이렇게 찾아낸 점들로 뇌자기공명영상을 정합하면 좀더 편리하고 안정적인 정합 결과를 얻을 수 있다.

The Improvement and Completion of Outcome index: A new assessment system for quality of orthodontic treatment

  • Hong, Mihee;Kook, Yoon-Ah;Kim, Myeng-Ki;Lee, Jae-Il;Kim, Hong-Gee;Baek, Seung-Hak
    • 대한치과교정학회지
    • /
    • 제46권4호
    • /
    • pp.199-211
    • /
    • 2016
  • Objective: Given the considerable disagreement between the Peer Assessment Rating (PAR) index and the American Board of Orthodontics Cast-Radiograph Evaluation, we aimed to develop a novel assessment system-the Improvement and Completion of Outcome (ICO) index-to evaluate the outcome of orthodontic treatment. Methods: Sixteen criteria from 4 major categories were established to represent the pretreatment malocclusion status, as well as the degree of improvement and level of completion of outcome during/after treatment: dental relationship (arch length discrepancy, irregularity, U1-SN, and IMPA); anteroposterior relationship (overjet, right and left molar position, ANB); vertical relationship (anterior overbite, anterior open-bite, lateral open-bite, SN-MP); and transverse relationship (dental midline discrepancy, chin point deviation, posterior cross-bite, occlusal plane cant). The score for each criterion was defined from 0 or -1 (worst) to 5 (ideal value or normal occlusion) in gradations of 1. The sum of the scores in each category indicates the area and extent of the problems. Improvement and completion percentages were estimated based on the pre- and post-treatment total scores and the maximum total score. If the completion percentage exceeded 80%, treatment outcome was considered successful. Results: Two cases, Class I malocclusion and skeletal Class III malocclusion, are presented to represent the assessment procedure using the ICO index. The difference in the level of improvement and completion of treatment outcome can be clearly explained by using 2 percentage values. Conclusions: Thus, the ICO index enables the evaluation of the quality of orthodontic treatment objectively and consecutively throughout the entire treatment process.

Validity of Three-dimensional Superimposition of Whole Face according to Different Registration Areas

  • Oh, Min-Hee;Jung, Chaeyong;Jeon, Sang-Woon;Cho, Jin-Hyoung
    • Journal of Korean Dental Science
    • /
    • 제12권2호
    • /
    • pp.39-47
    • /
    • 2019
  • Purpose: This study was aimed to evaluate whether the size of the changed area included in the registration area affects the validity of superimposition in three-dimensional (3D) images. Materials and Methods: Ten mannequin heads which were sectioned to simulate maxillary and mandibular setback surgery were used. A total of 30 images, including 10 initial images, 10 images after moving both middle and lower faces, and 10 images after moving only lower face, were obtained. The 9 landmarks which consisted of the bilateral and midline landmarks of the upper, middle, and lower faces respectively were used. Each 3D image obtained after simulation was superimposed 3 times according to the different 3 registration areas. The one-way ANOVA and posthoc analysis were performed. Result: In the case of moving middle and lower faces, there was no significant difference in all markers when superimposition was performed based on no changed area and forehead area. However, in the case of superimposition by the whole face, all measurements showed a significant difference (P<0.05) except for Pn (P>0.05). In the case of moving only lower face, all measurements did not show a significant difference regardless of the registration area. Conclusion: The validity of 3D superimposition in 3D images could be affected by the size of changed areas included in the registration area. In the postoperative evaluation of mandibular surgery, the registration area does not affect the accuracy of the 3D superposition. However, after the maxilla-mandibular surgery, the registration area should be set except for the changed soft tissue.

Distribution, side involvement, phenotype and associated anomalies of Korean patients with craniofacial clefts from single university hospital-based data obtained during 1998-2018

  • Chung, Jee Hyeok;Yim, Sunjin;Cho, Il-Sik;Lim, Seung-Weon;Yang, Il-Hyung;Ha, Jeong Hyun;Kim, Sukwha;Baek, Seung-Hak
    • 대한치과교정학회지
    • /
    • 제50권6호
    • /
    • pp.383-390
    • /
    • 2020
  • Objective: To investigate the distribution, side involvement, phenotype, and associated anomalies of Korean patients with craniofacial clefts (CFC). Methods: The samples consisted of 38 CFC patients, who were treated at Seoul National University Dental Hospital during 1998-2018. The Tessier cleft type, sex, side involvement, phenotype, and associated anomalies were investigated using non-parametric statistical analysis. Results: The three most common types were #7 cleft, followed by #0 cleft and #14 cleft. There was no difference between the frequency of male and female. Patients with #0 cleft exhibited nasal deformity, bony defect, and missing teeth in the premaxilla, midline cleft lip, and eye problems. A patient with #3 cleft (unilateral type) exhibited bilateral cleft lip and alveolus. All patients with #4 cleft were the bilateral type, including a combination of #3 and #4 clefts, and had multiple missing teeth. A patient with #5 cleft (unilateral type) had a posterior openbite. In patients with #7 cleft, the unilateral type was more prevalent than the bilateral type (87.0% vs. 13.0%, p < 0.001). Sixteen patients showed hemifacial microsomia (HFM), Goldenhar syndrome, and unilateral cleft lip and palate (UCLP). There was a significant match in the side involvement of #7 cleft and HFM (87.5%, p < 0.01). Patients with #14 cleft had plagiocephaly, UCLP, or hyperterorbitism. A patient with #30 cleft exhibited tongue tie and missing tooth. Conclusions: Due to the diverse associated craniofacial anomalies in patients with CFC, a multidisciplinary approach involving a well-experienced cooperative team is mandatory for these patients.

치과 임프란트 치료 계획을 위한 나선형 일반 단층촬영과 전산화 단층촬영시 흡수선량 및 유효선량 평가 (Absorbed and effective dose from spiral and computed tomography for the dental implant planning)

  • 홍병희;한원정;김은경
    • Imaging Science in Dentistry
    • /
    • 제31권3호
    • /
    • pp.165-173
    • /
    • 2001
  • Objectives : To evaluate the absorbed and effective doses of spiral and computed tomography for the dental implant planning. Materials and Methods: For radiographic projection, TLD chips were placed in 22 sites of humanoid phantom to record the exposure to skin and the mean absorbed dose to bone marrow, thyroid, pituitary, parotid and submandibular glands and nesophagus. Effective dose was calculated, using the method suggested by Frederiksen et al.. Patient situations of a single tooth gap in upper and lower midline region, edentulous maxilla and mandible were simulated for spiral tomography. 35 axial slices (maxilla) and 40 axial slices (mandible) with low and standard dose setting were used for computed tomography. All the radiographic procedures were repeated three times. Results: The mean effective dose in case of maxilla was 0.865 mSv, 0.452 mSv, 0.136 mSv and 0.025 mSv, in spiral tomography of complete edentulous maxilla, computed tomography with standard mAs, computed tomography with low mAs and spiral tomography of a single tooth gap (p<0.05). That in case of mandible was 0.614 mSv, 0.448 mSv, 0.137 mSv and 0.036 mSv, in spiral tomography of complete edentulous mandible, computed tomography with standard mAs, computed tomography with low mAs and spiral tomography of a single tooth gap (p<0.05). Conclusions: Based on these results, it can be concluded that low mAs computed tomography is recommended instead of spiral tomography for the complete edentulous maxilla and mandible dental implant treatment planning.

  • PDF

원발성 비성 NK/T 세포 림프종: 조기 진단을 위한 임상적, 방사선학적, 조직학적 특징 (Extranodal NK/T cell Lymphoma, nasal type: clinical, radiological, histological features for early diagnosis)

  • 박경란;한선희;김현실;이승준;차인호;김형준
    • Journal of the Korean Association of Oral and Maxillofacial Surgeons
    • /
    • 제36권6호
    • /
    • pp.497-501
    • /
    • 2010
  • Primary nasal type natural killer (NK)/T cell (NKTC) lymphoma, a specific form of malignant lymphoma, has a higher geographic incidence in Oriental, Mexican, and South American populations than the Western population. In Koreans, it comprises 9-12% of all cases of non-Hodgkin's lymphoma. This type of lymphoma has also been named as angiocentic lymphoma and lethal midline granuloma because the most common site is the upper airway area and its clinical aggressiveness presents with a necrotic and destructive pattern. NKTC lymphoma can also be detected in different organs (testis, spleen, parotid gland, skin, gastroinstinal tract, central nervous system, lungs, bone marrow, etc.) other than the upper airway including the oral cavity. The lymphoma detected in the oral cavity shows various destructive and inflammatory changes, similar to the signs of inflammation and infection from periodontitis and pulpal disease, making a diagnosis difficult with just the clinical signs. For early detection, clinical, radiological, and pathological examinations are required. This report describes the clinical, radiological and histological characteristics with a case report for the early detection of NKTC lymphoma in the oral cavity.

Comparison of marginal bone loss and patient satisfaction in single and double-implant assisted mandibular overdenture by immediate loading

  • Tavakolizadeh, Sara;Vafaee, Fariborz;Khoshhal, Masume;Ebrahimzadeh, Zahra
    • The Journal of Advanced Prosthodontics
    • /
    • 제7권3호
    • /
    • pp.191-198
    • /
    • 2015
  • PURPOSE. The purpose of this study was to compare the coronal bone level and patient satisfaction in 1-implant and 2-implant assisted mandibular overdentures. MATERIALS AND METHODS. Twenty patients who had maladaptive mandibular dentures were treated in this study. Patients were randomly divided into two groups. The first group received 1 implant (Simple line II, Implantium, South Korea) in their mandibular midline and the second group received 2 implants in their B and D regions (according to Misch's category). If the primary stability of each implant was at least 60 ISQ, ball attachment was placed and denture relined with soft liner. After 6 weeks, retentive cap incorporated with hard acrylic resin. In the 6 and 12 months recalls, periapical digital radiograph were made and visual analogue scale questionnaires were used to record patient satisfaction. The Friedman test was done for comparing the presurgical and postsurgical parameters in each group and the U-Mann Whitney test (P<.05) was done for comparison of post-treatment results between the two groups. RESULTS. All implants achieved sufficient primary stability to be immediately loaded. Patient satisfaction was high, and there were no significant differences between two groups (P>.05). In addition, mean marginal bone loss was $0.6{\pm}0.67$ mm in the first group and $0.6{\pm}0.51$ mm in the second group, after 12 month. Mean marginal bone loss showed no significant differences between two groups. CONCLUSION. This preliminary one-year result indicated that mandibular overdentures anchored to a single implant can be a safe and cost-effective method as a starting step for implant-overdenture treatment.

Three-dimensional finite element analysis of unilateral mastication in malocclusion cases using cone-beam computed tomography and a motion capture system

  • Yang, Hun-Mu;Cha, Jung-Yul;Hong, Ki-Seok;Park, Jong-Tae
    • Journal of Periodontal and Implant Science
    • /
    • 제46권2호
    • /
    • pp.96-106
    • /
    • 2016
  • Purpose: Stress distribution and mandible distortion during lateral movements are known to be closely linked to bruxism, dental implant placement, and temporomandibular joint disorder. The present study was performed to determine stress distribution and distortion patterns of the mandible during lateral movements in Class I, II, and III relationships. Methods: Five Korean volunteers (one normal, two Class II, and two Class III occlusion cases) were selected. Finite element (FE) modeling was performed using information from cone-beam computed tomographic (CBCT) scans of the subjects' skulls, scanned images of dental casts, and incisor movement captured by an optical motion-capture system. Results: In the Class I and II cases, maximum stress load occurred at the condyle of the balancing side, but, in the Class III cases, the maximum stress was loaded on the condyle of the working side. Maximum distortion was observed on the menton at the midline in every case, regardless of loading force. The distortion was greatest in Class III cases and smallest in Class II cases. Conclusions: The stress distribution along and accompanying distortion of a mandible seems to be affected by the anteroposterior position of the mandible. Additionally, 3-D modeling of the craniofacial skeleton using CBCT and an optical laser scanner and reproduction of mandibular movement by way of the optical motion-capture technique used in this study are reliable techniques for investigating the masticatory system.

하악 유견치 조기탈락은 무엇을 의미할까? (Clinical Implications of the Premature Loss of the Mandibular Primary Canine)

  • 이상호
    • 대한소아치과학회지
    • /
    • 제42권1호
    • /
    • pp.87-101
    • /
    • 2015
  • 하악 유견치의 조기탈락은 임상에서 흔히 관찰되는 현상으로 후에 영구치열에서 총생의 징후라 할 수 있으며 향후 영구 전치의 배열상의 문제점이나 부정교합을 유발할 수 있다. 영구 측절치가 맹출될 때 맹출 공간이 부족할 경우 인접해 있는 유견치 치근을 흡수시키면서 맹출하게 되고 그 결과 유견치가 조기에 탈락하게 되는데, 이 경우 영구 하악 영구 절치들이 설측으로 경사지게 되면 상악 절치들과 교합 접촉이 상실되어 상악 절치들이 과맹출됨으로써 수직피개교합 및 수평피개교합이 깊어지며 악궁둘레길이는 감소된다. 유견치가 편측으로 상실된 경우는 상기 현상 이외에, 영구 절치들이 조기 상실된 부위의 공간으로 경사지게 되어 정중선이 틀어지게 된다. 보통 4 mm 이하의 공간부족은 순차적인 유치의 disking과 passive lingual arch를 사용하여 leeway space를 보호하는 것만으로도 해결이 가능하며 4~6 mm 공간부족은 상기 술식과 함께 악궁의 전후방 및 측방확장으로 어느정도 해소할 수 있다.

Black triangle이 존재하지 않는 보존적이고 심미적인 상악 정중이개의 치료 (Conservative and esthetic closure of maxillary midline diastema without creating "black triangle" using direct resin composite)

  • 정경화;권은영;최윤경;김소연;전혜미;박정길
    • 구강회복응용과학지
    • /
    • 제33권2호
    • /
    • pp.163-168
    • /
    • 2017
  • 전치부에 발생한 치간이개는 심미적으로 문제를 일으키는 흔한 원인이 된다. "Black triangle"을 생성시키지 않고 치간이 개를 폐쇄시키는 것은 심미치과학에서 도전적 과제 중 하나이다. 전치부 수복치료의 성공 여부는 연조직과 경조직간의 심미적인 연합에 달려있다. 이번 증례에서는 치은-치아 계면에서 자연스러운 외형을 가지는 출현윤곽(emergence profile)을 형성하여 줌으로써 치은의 재생 과정이 일어나 심미적으로 만족스러운 치간이개 폐쇄를 이루어내었기에 이를 보고하는 바이다.