• The korean journal of orthodontics
• /
• v.42 no.2
• /
• pp.56-63
• /
• 2012

Objective: To identify the right and left difference of the facial soft tissue landmarks three-dimensionally from the subjects of normal occlusion individuals. Materials and Methods: Cone-beam computed tomography (CT) scans were obtained in 48 normal occlusion adults (24 men, 24 women), and reconstructed into 3-dimensional (3D) models by using a 3D image soft ware. 3D position of 27 soft tissue landmarks, 9 midline and 9 pairs of bilateral landmarks, were identified in 3D coordination system, and their right and left differences were calculated and analyzed. Results: The right and left difference values derived from the study ranged from 0.6 to 4.6 mm indicating a high variability according to the landmarks. In general, the values showed a tendency to increase according to the lower and lateral positioning of the landmarks in the face. Overall differences were determined not only by transverse differences but also by sagittal and vertical differences, indicating that 3D evaluation would be essential in the facial soft tissue analysis. Conclusions: Means and standard deviations of the right and left difference of facial soft tissue landmarks derived from this study can be used as the diagnostic standard values for the evaluation of facial asymmetry.

• Journal of Korean Academy of Oral and Maxillofacial Radiology
• /
• v.20 no.2
• /
• pp.315-333
• /
• 1990

This study was performed to measure the skin absorbed doses from full mouth standard intraoral radiography (l4 exposures) in bisecting angle and paralleling techniques. Thermoluminescent dosimeters were used in a phantom. Circular tube collimator(60㎜ in diameter, 20㎝ in length) and rectangular collimator(35㎜ × 44㎜, 40㎝ in length) were set for bisecting angle and paralleling techniques respectively. All measurement sites were classified into 8 groups according to distance from each point of central rays. The results were as follows: 1. The skin absorbed doses from the paralleling technique were significantly decreased than those from the bisecting technique in both points at central ray and points away from central ray. The percentage rates of decrease were greater at points away from central ray than those at central ray. 2. The skin absorbed doses at the lens of eye, parotid gland, submandibular gland and thyroid region were significantly decreased in paralleling techniuqe, but those of the midline of palate remained similar in both techniques. 3. The highest doses were measured at the site 20mm above the point of central ray for the mandibular premolars in bisecting angle technique and at the point of central ray for the mandibular premolars in paralleling techniques. The lowest doses were measured at the thyroid region in both techniques.

• Journal of Chest Surgery
• /
• v.33 no.1
• /
• pp.20-25
• /
• 2000

Background: Median sternotomy remains the standard approach used by surgeons for most intracardiac operations but the residual scar is cosmetically unsatisfactory. To avoid an unsightly midline scar we have tried to use alternative skin incision (bilateral subm-ammary skin incision) to median sternal skin incision, In this study we have tried to compare different postoperative results of wound between two different skin incisional methods. Material and Method: Between June 1997 and June 1998, a bilateral subma-mmary skin incision combined with vertical sternotomy was performed in 21 pediatric female patients (submammary group)to repair acyanotic congenital heart disease. after the period we carried out a retrograde study about postoperative wound states comparing this incision with median sternal skin incision controls in whom there were 23 pediatric pat-ients (control group). Result: Patients' age ranged from 14 to 96 months(mean 38.2 months) Mean duration of subcutaneous drains using Hemovac which was used only in the patients of submammary group was 4.2 days and total amount of the drained effusion was 51.1 ml. Postoperative wound complications included wound eruption in one patient wound disruption in one patient and skin necrosis in 3 patients in submammary group and included wound disruption in 4 patients in controls. mean duration required for wound healing was 15,5 days in submammary group versus 10.4 days in controls. The mean scar length was 12.5 cm in submammary group versus 11.3 cm in controls. The average follow-up was 8.2 months in submammary group versus 9.0 months in controls. In submammary group 3 patients parents(14.3%) were pleased with their cosmetic results of wound scar but 8(38.1%) were dissatisfied. Among the 23 patients in control group 8(34.8%) were pleased but 8(34.8%) complained ofunhappiness with the scar.

• Journal of Periodontal and Implant Science
• /
• v.46 no.3
• /
• pp.197-206
• /
• 2016

Purpose: The aim of this study was to evaluate alterations of papilla dimensions after orthodontic closure of the diastema between maxillary central incisors. Methods: Sixty patients who had a visible diastema between maxillary central incisors that had been closed by orthodontic approximation were selected for this study. Various papilla dimensions were assessed on clinical photographs and study models before the orthodontic treatment and at the follow-up examination after closure of the diastema. Influences of the variables assessed before orthodontic treatment on the alterations of papilla height (PH) and papilla base thickness (PBT) were evaluated by univariate regression analysis. To analyze potential influences of the 3-dimensional papilla dimensions before orthodontic treatment on the alterations of PH and PBT, a multiple regression model was formulated including the 3-dimensional papilla dimensions as predictor variables. Results: On average, PH decreased by 0.80 mm and PBT increased after orthodontic closure of the diastema (P<0.01). Univariate regression analysis revealed that the PH (P=0.002) and PBT (P=0.047) before orthodontic treatment influenced the alteration of PH. With respect to the alteration of PBT, the diastema width (P=0.045) and PBT (P=0.000) were found to be influential factors. PBT before the orthodontic treatment significantly influenced the alteration of PBT in the multiple regression model. Conclusions: PH decreased but PBT increased after orthodontic closure of the diastema. The papilla dimensions before orthodontic treatment influenced the alterations of PH and PBT after closure of the diastema. The PBT increased more when the diastema width before the orthodontic treatment was larger.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.34 no.4
• /
• pp.709-717
• /
• 2007

Impaction of maxillary incisor is rare than the third molar and canine, but its rate is higher than the other anterior teeth due to frequent mesiodens, trauma and variation of root formation (root dilaceration etc.). It is often observed in the dental age of about eight years and over. It will be occurred that the space loss, midline deviation and cyst formation due to the impaction of maxillary incisor. So it is important to evaluate the precise location of impacted tooth and to make appropriate treatment plan. Treatment would be surgical extraction or expectation for spontaneous eruption. If the impacted tooth has no pathologic change and development of the root is favorable, orthodontic traction is recommended for recovery of function and esthetics. In these cases, we performed orthodontic traction for the eruption of impacted maxillary incisors, and obtained satisfactory results.

• The Journal of Korean Academy of Prosthodontics
• /
• v.44 no.6
• /
• pp.712-721
• /
• 2006

Statement of problem. Acrylic resin is most commonly used for denture bases. However, acrylic resin has week points of volumetric shrinkage during polymerization that reduces denture fit. The expandability of POSS (Polyhedral Oligomeric Silsesquioxane) containing polymer could be expected to reduce the polymerization shrinkage of denture bases and would increase the adaptability of the denture to the tissue. Purpose. The purpose of this study was to compare the dimensional stability in the conventional acrylic resin base, POSS-containing acrylic resin base, and metal bases. Materials and methods. Thirty six maxillary edentulous casts and dentures of different base were fabricated. Tooth movement and tissue contour change of denture after processing (resin curing, deflasking, decasting and finishing without polishing) and immersion in artificial saliva at $37^{\circ}C$ for 1 week and 4 weeks were measured using digital measuring microscope and threedimensional laser scanner. Results. The results were as follows: 1. The conventional resin group showed significant (p<0.01) dimensional change throughout the procedure (processing and immersion in artificial saliva). 2. After processing, the metal group and POSS resin group showed lower linear and 3-dimensional change than conventional resin group (p<0.01). 3. There was no statistically significant linear and 3-dimensional change after immersion for 1 week and 4 weeks in metal and POSS resin group. 4. In all groups, the midline and alveolar ridge crest area presented smaller 3-dimensional change compared with vestibule and posterior palatal seal area after processing and soaking in artificial saliva for 1 week and 4 weeks (p<0.01). Conclusion. In this study, a reinforced acrylic-based resin with POSS showed good dimensional stability.

• The korean journal of orthodontics
• /
• v.13 no.1
• /
• pp.31-43
• /
• 1983

The following results were abtained based on the research of the occlusal patterns among 1074 handicapped persons (cerebral palsy: 46, mental subnormality: 619, deafmute: 285, blind: 111, childish autism:8, cleft lip and cleft palate:3, polimyelitis:2) of the age between 6 and 23 in Chollanamdo, Korea, in comparison with a normal group of 1048 children of the age between 6 and 15 selected at random in J primary school in Gwang-ju City. 1. According to Angle's malocclusion classification, all the handicapped groups, except the cerebral palsy and the blind, showed a higher prevalence of malocclusion than that of the normal. Especially the prevalence of Class II, devision 1 malocclusion in the cerebral palsy was the highest, and the prevalence of Class III malocclusion in all the handicapped groups was higher than that of the normal group. Among these groups the highest prevalence of Class III malocclusion was in the Down's syndrome group. 2. On the the abnormal pattern of the anterior region, there was no significant difference $(P\leqq0.05)$ between the normal and the cerebral palsy, the deafmute, and e blind. The open bite $(7.27{\pm}1.04\%)$ and the cross-bite $(32.7{\pm}6.33\%)$ of the Down's syndrome wire higher than that of the normal, and the forward position of the mandible could be recognized in the Down's syndrome group. 3. On the midline position of the dentition, all the handicapped showed the same percentage of deviation, but the degree of mandibular shift to the right $(20.00{\pm}5.39\%)$ or left $(10.91{\pm}4.20\%)$ was higher than that of the normal only in the Down's syndrome group. 4. On the abnormal pattern of the posterior region, the cross-bite of the Down's syndrome was higher than that of the normal by $20.00{\pm}5.39\%$, the cross-bite of the cerebral palsy and the cross-bite and the open bite of the mental subnormality were slightly higher than that of the normal. The other handicapped groups showed no significant difference $(P\leq0.05)$ to the normal.

• The korean journal of orthodontics
• /
• v.24 no.4 s.47
• /
• pp.759-772
• /
• 1994

Orthodontists have experienced the treatment of cases with three lower incisors. Occasionally a lower incisor was either congenitally missing or so seriously damaged by injury or disease that its removal presented the best prospect for the patient. Sometimes the intentional extraction of a lower incisor is needed to produce enhanced functional and esthetic results with minimal orthodontic manipulation. Such cases have unfavorable anterior tooth size discrepancies and present difficulties in achieving good occlusal results. However such difficulties can be overcome by the sensible diagnosis and treatment plan. Three different cases are presented and the conclusions are listed. 1. It is important for orthodontist who tries to treat three lower incisor cases to measure and calculate accurately the degree of deviation of tooth size and morphology and the anterior tooth size ratio. 2. A diagnostic setup model should be made to determine whether the incisor extraction is appropriate and space closure is needed or not. It is the best way to be sure that the occlusal results, including overbite and overjet, will be acceptable and how far the degree of midline deviation is. It also shows the amount of interproximal reduction to achieve an acceptable occlusal result. 3. The class I relationship between the upper canine and the lower one must be obtained to establish the canine rise during eccentric movement by the concept of mutually protective occlusion. It also helps to maintain the stable occlusal result.

• The korean journal of orthodontics
• /
• v.24 no.4 s.47
• /
• pp.787-798
• /
• 1994

The purpose of this study was three-fold: i) to investigate the degree of asymmetry in Angle's Class III malocclusion patients and normal adults; ii) to determine the nature of difference existed between two groups; and iii) to investigate the correlationship between the degree of asymmetry and ANB and overbite in Angle's Class III malocclusion patients. The subjects consisted of 25 Angle's Class III malocclusion patients and 25 normal adults and the mean ages were 22.0 and 24.5 years, respectively. Their posteroanterior and lateral cephalograms were traced and analysed with three-dimensional approach. The results were as follows: 1. Asymmetry of Angle's Class III malocclusion group was significant in all regions except cranial base. Their horizontal asymmetry was seen in mandibular angle, maxillary and mandibular 1st molar, mandibular midline and menton. Vertical asymmetry was observed in maxillary 1st molar and mandibular shape and anteroposterior asymmetry in mandibular angle. 2. Nine variables indicating asymmetry were selected and each variable had similar discriminant score. 3. There was a little correlationship between An and asymmetric variable(MSR-B6) and its correlation coefficients was 0.3564. 4. There was no significant correlationship between overbite and asymmetric variables.

• The korean journal of orthodontics
• /
• v.48 no.1
• /
• pp.30-38
• /
• 2018

Objective: The purpose of this study was to investigate factors influencing the success rate of orthodontic microimplants (OMIs) using panoramic radiographs (PRs). Methods: We examined 160 OMIs inserted bilaterally in the maxillary buccal alveolar bone between the second premolars and first molars of 80 patients (51 women, 29 men; mean age, $18.0{\pm}6.1years$) undergoing treatment for malocclusion. The angulation and position of OMIs, as well as other parameters, were measured on PRs. The correlation between each measurement and the OMI success rate was then evaluated. Results: The overall success rate was 85.0% (136/160). Age was found to be a significant predictor of implant success (p < 0.05), while sex, side of placement, extraction, and position of the OMI tip were not significant predictors (p > 0.05). The highest success rate was observed for OMIs with tips positioned on the interradicular midline (IRML; central position). Univariate analyses revealed that the OMI success rate significantly increased with an increase in the OMI length and placement height of OMI (p = 0.001). However, in simultaneous analyses, only length remained significant (p = 0.027). Root proximity, distance between the OMI tip and IRML, interradicular distance, alveolar crest width, distance between the OMI head and IRML, and placement angle were not factors for success. Correlations between the placement angle and all other measurements except root proximity were statistically significant (p < 0.05). Conclusions: Our findings suggest that OMIs positioned more apically with a lesser angulation, as observed on PRs, exhibit high success rates.