• 대한통합의학회지
• /
• 제9권4호
• /
• pp.283-289
• /
• 2021

Purpose : The purpose of this study is to investigate the effect of mid frequency electrical stimulation during squat exercise on the muscle activity and muscle activity ratio of vastus medialis oblique and vastus lateralis, and to prepare scientific basic data for exercise intervention using mid frequency electrical stimulation. Methods : This study was conducted with students from University C located in Busan, and among a total of 123 subjects, 12 subjects who complained of knee joint dysfunction between 80 and 90 points using the Kujala patellofemoral score (KPS) were used. All subjects participated in the experiment for 3 days, and MVIC values were measured for normalization of muscle activity values on the first day. For the two days, participants participated in the experiment and performed squat exercise or squat exercise receiving mid-frequency electrical stimulation in random order. Measurements were taken in the squat position immediately after the squat exercise, and muscle activities of vastus medialis oblique and vastus lateralis were measured. The measured data were compared through the dependent t test, and the statistical significance level was set to .05. Results : According to the results of this study, in the case of applying mid-frequency electrical stimulation together in the ratio of vastus medialis oblique and vastus lateralis muscle activity during squat exercise, higher values were observed compared to the case of not applying mid-frequency electrical stimulation together, and statistically significant. Also, when mid-frequency electrical stimulation was applied to both vastus medialis oblique and vastus lateralis activities during the squat exercise, higher values were shown compared to the case where the mid-frequency electrical stimulation was not applied together, but there was no statistically significant difference. Conclusion : The results of this study reported that mid-frequency electrical stimulation provided to vastus medialis oblique increased the muscle activity ratio of vastus medialis oblique and vastus lateralis. Therefore, the improvement of coordination due to the enhancement of the activity of vastus medialis oblique through mid-frequency electrical stimulation will be more helpful in the treatment of patellofemoral pain syndrome patient. In addition, it is hoped that the electrical stimulation method applied to exercise will be widely used.

• 한국인터넷방송통신학회논문지
• /
• 제23권6호
• /
• pp.125-132
• /
• 2023

본 논문은 NP-완전으로 알려진 k-SAT 문제의 절의 수 m에 대해 O(km)의 다항시간 알고리즘을 제안하였다. 기존에 널리 알려진 DPLL은 문자 수 𝑙에 대해 분기한정법의 전수탐색으로 해를 찾지 못하면 역추적을 수행하는 방식으로 최악의 경우 O(2^𝑙)을 수행해야 한다. DPLL은 최소 빈도수 문자가 포함된 절을 참(T)으로 하도록 문자에 참(T) 또는 거짓(F)을 대입하여 해당 문자가 포함된 절을 제거하는 방식으로 SAT Solver의 근간을 이루고 있다. 제안된 알고리즘은 DPLL과는 반대로 부울 수식 f에 존재하는 최대 빈도수 문자 _max𝑙을 선택하고, $_{\max}({\mid}l{\mid},{\mid}{\bar{l}}{\mid})=1$로 설정하고, 𝑙∈c_i 절은 삭제하며, ${\bar{l}}{\in}c_i$절에서 ${\bar{l}}$를 삭제하는 방법을 적용하였다. 제안된 알고리즘을 다양한 k-SAT 문제들에 적용한 결과 기존의 DPLL 알고리즘보다 적은 횟수를 수행함을 알 수 있었다.

• Nuclear Engineering and Technology
• /
• 제30권6호
• /
• pp.531-540
• /
• 1998

The DYLAM-3 code which overcomes the limitation of event tree/fault tree was applied to LOOP (Loss of Off-site Power) in the mid-loop operation employing HEPs (Human Error Probabilities) supplied by the ASEP (Accident Sequence Evaluation Program) and the SEPLOT (Systematic Evaluation Procedure for Low power/shutdown Operation Task) procedure in this study. Thus the time history of core uncovery frequency during the mid-loop operation was obtained. The sensitivity calculations in the operator's actions to prevent core uncovery under LOOP in the mid-loop operation were carried out. The analysis using the time dependent HEP was performed on the primary feed & bleed which has the most significant effect on core uncovery frequency. As the result, the increment of frequency is shown after 200 minutes duration of simulation conditions. This signifies the possibility of increment in risk after 200 minutes. The primary feed & bleed showed the greatest impact on core uncovery frequency and the recovery of the SCS (Shutdown Cooling System) showed the least impact. Therefore the efforts should be taken on the primary feed & bleed to reduce the core uncovery frequency in the mid-loop operation. And the capability of DYLAM-3 in applying to the time dependent concerns could be demonstrated.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2006년도 추계학술대회논문집
• /
• pp.771-775
• /
• 2006

There has been much effort to find suitable methods for structural analysis in the mid-frequency region where traditional low frequency methods have increasing uncertainties whilst statistical energy analysis is not strictly applicable. Systems consisting of relatively stiff beams coupled to flexible plates have a particularly broad mid-frequency region where the beams support only a few modes whilst the plate has a high modal density and modal overlap. A system of two parallel beams coupled to a plate is investigated based on the wave method, which is an approximate method. The wave model is extended from a single-beam-plate system, to a plate with two identical beams which is modelled using a symmetric-anti symmetric technique. Experimental results such as powers and energy ratios show the validity of the analytical wave models.

• Structural Engineering and Mechanics
• /
• 제39권1호
• /
• pp.47-75
• /
• 2011

An accurate substructural synthesis method including random responses synthesis, frequency-response functions synthesis and mid-order modes synthesis is developed based on rigorous substructure description, dynamic condensation and coupling. An entire structure can firstly be divided into several substructures according to different functions, geometric and dynamic characteristics. Substructural displacements are expressed exactly by retained mid-order fixed-interfacial normal modes and residual constraint modes. Substructural interfacial degree-of-freedoms are eliminated by interfacial displacements compatibility and forces equilibrium between adjacent substructures. Then substructural mode vibration equations are coupled to form an exact-condensed synthesized structure equation, from which structural mid-order modes are calculated accurately. Furthermore, substructural frequency-response function equations are coupled to yield an exact-condensed synthesized structure vibration equation in frequency domain, from which the generalized structural frequency-response functions are obtained. Substructural frequency-response functions are calculated separately by using the generalized frequency-response functions, which can be assembled into an entire-structural frequency-response function matrix. Substructural power spectral density functions are expressed by the exact-synthesized substructural frequency-response functions, and substructural random responses such as correlation functions and mean-square responses can be calculated separately. The accuracy and capacity of the proposed substructure synthesis method is verified by numerical examples.

• 대한전자공학회논문지
• /
• 제10권3호
• /
• pp.61-68
• /
• 1973

한글 자음을 sona-grap로 부터 얻은 음성 pattern으로 주파수분석적인 방법으로 정밀분석한다는 것은 지극히 곤란한 것이며 주파수합성적인 방법으로 연구해야 할 문제임을 알았다. 그래서 자음 주파수영역을 분석추출하였으며, 전자음에 후독하는 $\mid$ㅏ$\mid$의 format가 조음방법과 조음위치와 대응해서 변화하는 상태를 주로 관찰하였다.

• 천문학회보
• /
• 제39권2호
• /
• pp.103-103
• /
• 2014

Manufacturing of lens and mirror using Diamond Turning Machine (DTM) offers distinct advantages including short fabrication time and low cost as compared to grinding or polishing process. However, the DTM process can leave mid-frequency error in the optical surface which generates an undesirable diffraction effect and stray light. The mid-frequency error is expected to be eliminated by mechanical polishing after the DTM process, but polishing of soft surface of ductile aluminum is extremely difficult because the polishing process inevitably degrades the surface form accuracy. In order to increase its surface hardness, we performed electroless nickel plating on the surface of diamond-turned aluminum (Al-6061T6) off-axis mirrors, which was followed by the 6-hour-long baking process at $200^{\circ}C$ for improving its hardness. Then we polished the nickel plated off-axis mirrors to remove the mid-frequency error and measured polished mirror surfaces using the optical surface profilometer (NT 2000, Wyko Inc.). Finally, we ascertained that the mid-frequency error on the mirror surface was successfully removed. During the whole processes of nickel plating and polishing, we monitored the form accuracy using the ultra-high accurate 3-D profilometer (UA3P, Panasonic Corp.) to maintain it within the allowable tolerance range (< tens of nm). The polished off-axis mirror was optically tested using a visible laser source and a pinhole, and the airy pattern obtained from the polished mirror was compared with the unpolished case to check the influence of mid-frequency error on optical images.

• Journal of electromagnetic engineering and science
• /
• 제3권2호
• /
• pp.79-85
• /
• 2003

In this paper, we investigated the degree of compensation for distorted optical pulse of wavelength division multiplexed(WDM) channel with initial frequency chirp generated in optical transmitter. The WDM channel signal distortion is due to chromatic dispersion, self phase modulation(SPM) and cross phase modulation(XPM) in fiber. The considered system is 3 ${\times}$ 40 Gbps intensity modulation direct detection(IM/DD) WDM transmission systems, which adopted mid-span spectral inversion(MSSI) as compensation method. We confirmed that the effect of initial frequency chirp on compensation for signal distortion due to a SPM is gradually decreased as a dispersion coefficient of fiber becomes gradually small. But, in the aspect of a compensation for signal distortion due to both SPM and XPM, the effect of initial frequency chirp on compensation is gradually decreased as a dispersion coefficient of fiber becomes gradually large.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 2009년도 정기 학술대회
• /
• pp.135-138
• /
• 2009

Most of the studies use model order reduction for low frequency (LF) response analysis due to their high computational efficiency. In LF response analysis, one of model order reduction, algebraic substructuring (AS) retains all LF modes when using the modal superposition. However, in mid-frequency (MF) response analysis, the LF modes make very little contribution and also increase the number of retained modes, which leads to loss of computational efficiency. Therefore, MF response analysis should consider low truncated modes to improve the computational efficiency. The current work is focused on improving the computational efficiency using a AS and a frequency sweep algorithm. Finite element simulation for a MEMS resonator array showed that the performance of the presented method is superior to a conventional method.

• 한국소음진동공학회논문집
• /
• 제17권2호
• /
• pp.121-129
• /
• 2007

There has been much effort to find suitable methods for structural analysis in the mid-frequency region where traditional low frequency methods have increasing uncertainties whilst statistical energy analysis is not strictly applicable. Systems consisting of relatively stiff beams coupled to flexible plates have a particularly broad mid-frequency region where the beams support only a few modes whilst the plate has a high modal density and modal overlap. A system of two parallel beams coupled to a plate is investigated based on the wave method, which is an approximate method. Muller's method is utilised for obtaining complex roots of a dispersion wave equation, which does not converge in the conventional wave method based on a simple iteration. The wave model is extended from a single-beam-plate system, to a plate with two identical beams which is modelled using a symmetric-antisymmetric technique. The important hypothesis that the coupled beam wavenumber is sufficiently smaller than the plate free wavenumber is experimentally verified. Finally, experimental results such as powers and energy ratios show the validity of the analytical wave models.