• 대한전자공학회논문지
• /
• 제16권3호
• /
• pp.49-56
• /
• 1979

A new microwave frequency disriminator in MIC is described which was developed using realization theory appropriate to a transmission line frequency discriminator designed to be used in the VHF range. It is experimentally verified that the discriminator is linear in a 600 MHz bandwith and has VSWR less than 1.2 in that range in agreement with the theoretical model.

• 대한전자공학회논문지
• /
• 제23권1호
• /
• pp.36-41
• /
• 1986

A new microwave wideband frequency discdriminator is described, which is based on the theory of transmission line frequency discriminator known as having the widest bandwidth. It has been realized with microstrip lines and slot lines. It is experimentally verified that the discriminator is linear in a 1.6 GHz bandwidth centered at frequency of 3.2 GHz and has return loss of 20dB or more in that bandwidth.

• 대한전기학회논문지:전기물성ㆍ응용부문C
• /
• 제51권2호
• /
• pp.85-91
• /
• 2002

A novel multi-section power divider configuration is Proposed to obtain wide-band frequency performance up to microwave frequency region. Design procedures for the proposed microwave broadband power divider are composed of a Planar multi-section three-Ports hybrid and a waveguide transformer design procedures. The multi∼section power divider is based on design theory of the optimum quarter- wave transformer Furthermore, in order to obtain the broadband isolation performance between the two adjacent output ports, the odd mode equivalent circuit should be matched by using the lossy element such as resistor. The derived design formula for calculating these odd mode∼matching elements is based on the singly terminated filter design theory. The waveguide transformer section is designed to suppress the propagation of the higher order modes such as waveguide modes due to employing the metallic electric wall. Simulation and experiment show excellent performance of multi section power divider.

• 한국자동차공학회논문집
• /
• 제16권1호
• /
• pp.45-51
• /
• 2008

This paper presents theoretical and experimental analysis on the characteristics of the power spectrum of electormagnetic waves radiating from the spark plug and their cables of a distributorless ignition system. The theoretical study was conducted applying the microwave transmission line theory and the antenna theory. The experimental works were carried out to measure the standing wave ratio(SWR) and the radiation power spectrum of this system. As a result, it has been found that a spark plug and its cable is working as a monopole antenna radiating elelctromagnetic waves. Because of its similar structure to a monopole antenna, the envelope of radiation power spectrum distribution has a bell shape which can be obtained from a monopole antenna operating as a series resonant circuit. The frequency characteristics from the SWR measurements show a similar frequency characteristics of power spectrum of the system studied. Also, it has been found that the density of the power spectrum of the system fitting a long time used spark plug is higher than that of fitting a new spark plug.

• Journal of electromagnetic engineering and science
• /
• 제1권1호
• /
• pp.30-36
• /
• 2001

Whereas it is well known that microwave propagation around corners of urban area is estimated well by the uniform geometrical theory of diffraction (UTD), it is not clear how much depolarization occurs at a given receiver position and how much transmission through walls affects to total path loss. This paper presents the results of the ray tracing simulation to answer these questions. Simulations of microwave propagation around corners were performed for various line-of-sight (LOS) and out-of-sight(OOS) positions of a receiver, by summing the electrical fields of reflected, diffracted and transmitted rays coherently. Since height difference between transmitter and receiver, as well as ground plane, causes depolarization, the ray tracing simulation estimates the cross-polarization coupling. It was found that the cross-polarization coupling decreases as receiver moves away from transmitter. Another part of the study focused on the signal transmitted through building walls of the corner. It was found that the transmitted field is dominant at OOS region when the conductivity of the walls is low (for example, lower than 0.0l S/m). The simulation results of the ray tracing technique in this study agreed well with an experimental measurement around corners.

• 한국전자파학회논문지
• /
• 제12권6호
• /
• pp.1002-1008
• /
• 2001

본 논문은 전파흡수기능을 갖는 경량, 고강도 고분자 복합재료의 재료 설계 및 전각흡수특성에 관한 연구이다. 전송선로 이론을 도입하여 다층구조 전파흡수체의 반사감쇠량 계산에 필요한 이론식을 제시하고, 각 층의 재료정수 및 두께의 함수로 계산한 전파흡수능 결과에 근거하여 각 층의 재질에 적합한 복합재료를 제시하였다. 본 연구에서 가장 중요한 결과는 페라이트 충진재를 사용하지 않은 3층 구조 (표면층/중간층/배면층)의 전파흡수구조재를 설계하였다는 점이다. 표면층 재료로는 저유전율 특성의 유리섬유 복합재료를 사용하고, 중간층 및 배면층에는 유전상수 및 도전손실이 큰 탄소섬유 복합재료를 사용하여 4~12 GHz 주파수 범위에서 10 dB 이상의 전파흡수특성을 얻을 수 있었다. 이에 반하여 흡수층/반사층으로 구성되는 2층 구조의 전파흡수구조재에서는 흡수층에 페라이트 충진재의 사용이 필수적이었다. 반사층 재질로 탄소섬유 복합재료를 사용하고, 횹수층 유리섬유 복합재료에 페라이트 충진재를 약 40 wt% 첨가함으로써 4~12 GHz 주파수 범위에서 10 dB 이상의 전파흡수특성을 얻을 수 있었다.

• 한국전자파학회논문지
• /
• 제28권2호
• /
• pp.155-158
• /
• 2017

전자, 통신 기술의 발달로 대부분의 장소에서 전자기기가 존재한다. 자동차, 열차, 항공기 등 다양한 장소에서 전자기기의 활용이 증가된 만큼 고출력 전자기파로 인한 오작동과 하드웨어의 치명적인 손상을 확인할 수 있는 안전성을 연구하는 것이 중요하게 되었다. 구조물 내부에 전자기기 및 여러 센서를 연결하는 케이블은 전자기파에 의한 오작동을 초래할 수 있는 원인 중 하나이기 때문에 전자파 영향에 대한 해석이 필수적이다. 본 논문에서는 상관관계 함수와 전송이론을 이용하여, 전기적으로 큰 공진기 내부에 존재하는 케이블에 유기되는 전류를 계산해 외부 전자기파에 의한 영향을 해석하였다.

• ETRI Journal
• /
• 제40권3호
• /
• pp.389-395
• /
• 2018

A novel class of planar metamaterial unit-cells consisting of a peace logo pattern is presented. A significant advantage of the proposed peace-logo planar metamaterial (PLPM) unit-cell over existing designs is its tunability, simplicity, and compatibility with microstrip structures. The theoretical analysis is founded on the famous transmission-line theory for the metamaterial concept. Then, the tunable dual-band two-sided PLPM (TSPLPM) unit-cell is designed by printing a similar PLPM pattern at the bottom of the substrate. The influence of the bottom PLPM pattern on the resonance frequencies of the unit-cell was analyzed by performing numerical simulations using CST Microwave Studio 2017 and HFSSv15 simulators. The results of the numerical simulations demonstrated that the proposed TSPLPM has the ability to control the resonance frequencies over 50 GHz-75 GHz for millimeter-wave applications.

• Journal of electromagnetic engineering and science
• /
• 제11권3호
• /
• pp.143-151
• /
• 2011

This paper presents a survey of recent wireless power transfer systems. The issue of wireless power transfer is to achieve a highly efficient system with small positioning errors of the facilities setting. Several theories have been presented to obtain precise system design. This paper presents a summary of design theory for short range power transfer systems and detailed formulations based on a circuit model and an array of infinitesimal dipoles. In addition to these theories, this paper introduces a coil array scheme for improving the efficiency for off axis coils. In the microwave range, tightly coupled resonators provide a highly efficient power transfer system. This paper present san-overlay resonator array consisting of half wavelength microstrip line resonators on the substrate with electromagnetically coupled parasitic elements placed above the bottom resonators. The tight couplings between the waveguide and the load resonator give strong power transmission and achieve a highly efficient system, and enables a contact-less power transfer railroad. Its basic theory and a demonstration of a toy vehicle operating with this system are presented. In the last topic of this paper, harmonic suppression from the rectenna is discussed with respect to acircular microstrip antenna with slits and stubs.

• 대한전자공학회논문지TC
• /
• 제37권3호
• /
• pp.28-34
• /
• 2000

본 논문에서는 선형화된 리카티(Riccati) 방정식에 후리에 변환을 적용하여 주파수 특성함수와 불균일 테이퍼 전송선상의 새로운 임피던스 분포를 구한다. 리카티 방정식을 선형화 함으로써 발생할 수 있는 오차를 보상하기 위해 임의의 Taylor 급수를 임피던스 항에 추가한다. 추가된 항은 불균일 전송선 양단의 임피던스 불연속을 제거하는 역할을 한다. 설계과정을 통해서 여파기의 과녁 주파수 특성에 접근해 가는 것을 축차법을 통해서 보이며, 위상함수의 역할을 예제를 통해서 보인다. 본 논문에서 제시한 설계법은 불균일 테이퍼 전송선의 설계에 뛰어난 융통성을 제공하므로, 임의의 주파수 대역특성을 만족시키는 여파기 및 임피던스 정합회로 설계에 응용할 수 있다.