• The International Journal of Costume Culture
• /
• 제13권1호
• /
• pp.62-66
• /
• 2010

Of all the ways that energy is consumed within textile industry, few are as high energy-expending as dyeing process. The energy consumption in dyeing process amounts to 77% of total fuel consumption, 54% of total electricity use. A technical development in terms of efficient saving energy and time as well is required in the process of dyeing textiles. Recently, dyeing experts are investigating new technologies can conserve energy grafting into microwaves, radio waves, infrared lights, etc. Dyeing industry in Korea, however, the research related to energy conservation has been rarely conducted. Accordingly, this study aims to examine the possibility where especially microwaves could be applied to reduce the energy use and enhance dyeing process skill. This study performs the experiment in which microwave is employed as heating condition in dyeing and figures out as color yield being promoted, bathochromic effect would be achieved. Applying microwaves in dyeing process is expected to lower the carbon emission, energy and time wasted, ultimately exalt economic efficiency.

• 생약학회지
• /
• 제45권2호
• /
• pp.107-112
• /
• 2014

The purpose of this study is to develop a new preparation process of American ginseng (Panax quinquefolium) extract featuring high concentration of ginsenoside $Rg_3$, $Rg_5$, and $Rk_1$, Red ginseng special components. Chemical transformation from ginseng saponin glycosides to prosapogenin was analyzed by the HPLC. Extracts of American ginseng were processed under several treatment conditions of microwave and vinegar (about 14% acidity). The results showed that the quantity of ginsenoside $Rg_3$ increased by over 0.9% at the 20 minutes of the pH 2~4 vinegar and microwave American ginseng ethanol extract compared with other process times. The result of MAG-20 indicates that the American ginseng microwave and vinegar-processed American ginseng extracts (about 14% acidity) treated for 20 minutes produced the highest amount of ginsenoside $Rg_3$ (0.969%), $Rg_5$ (1.071%), and $Rk_1$ (0.247%). Besides, MAG-15 indicates that the microwave - and vinegar-processed American ginseng extracts (about 14% acidity) treated for 15 minutes produced the highest amount of ginsenoside $Rg_3$ (0.772%), $Rg_5$ (1.330%), and $Rk_1$ (0.386%). This indicates that American ginseng treated with microwave and vinegar had the quantity of the ginsenoside $Rg_3$ over 32 times the amount of the ginsenoside $Rg_3$ (which was not found in raw and American ginsengs) in the average commercial Red ginseng.

• 공업화학
• /
• 제9권4호
• /
• pp.481-485
• /
• 1998

마이크로파 열원을 이용하여 황산 용액에서 카올린을 가열 반응시켜 무기고분자인 수화 황산 알루미늄을 합성하였다. 하소된 카올린으로부터 알루미나의 최대 추출율은 재래식 열공정 ($80^{\circ}C$, 1 M 및 240분)에서 72.8%이었고, 마이크로파 공정 ($90^{\circ}C$, 1 M 및 60분)에서 99.9%이었다. 재래식 열공정에서와는 달리 마이크로파 공정에서 추출 합성된 수화 황산 알루미늄 시료는 빠른 결정립 성장에 의해 거대 크기의 판상으로 이루어진 층상구조로 존재하였다. 마이크로파와 재래식 열공정에서 합성하여, $1100^{\circ}C$에서 하소된 시료들을 모두 구형으로 응집된 분말상의 ${\gamma}-Al_2O_3$ 존재하였고, 이 시료들의 비표면적은 각각 113.5와 $106.6m^2/g$이었고, 입자의 평균 입경은 각각 46.5와 $26.3{\mu}m$이었다.

• 공업화학
• /
• 제31권2호
• /
• pp.208-214
• /
• 2020

본 연구에서는 식물세포 Taxus chinensis로부터 수분 제거를 통한 바이오매스 보관 및 추출 효율 향상을 위하여, 마이크로웨이브를 이용한 건조의 특성 및 메커니즘을 조사하였다. 마이크로웨이브 파워가 100, 200, 300 W로 증가함에 따라 수분의 제거 효율은 증가하였다. 실험 데이터를 대표적 동역학적 건조 모델에 적용할 때, Page 모델과 modified Page 모델이 가장 적합한 것으로 결정되었다. 열역학적 파라미터는 마이크로웨이브를 이용한 건조의 자발적 및 흡열특성을 나타내었으며, 건조 과정에서 무질서도는 증가함을 알 수 있었다. 마이크로웨이브 파워(100~300 W)가 증가함에 따라 수분의 유효확산계수(3.445 × 10^-9~7.163 × 10^-7 ㎡/s) 및 대류물질전달계수(3.1529 × 10^-5~1.2895 × 10^-2 m/s)가 증가하였다. 작은 비오트 수(0.3890~0.7198)를 고려할 때, Taxus chinensis의 건조 진행은 외부 확산에 의해 조절됨을 알 수 있었다.

• 환경위생공학
• /
• 제13권3호
• /
• pp.102-112
• /
• 1998

The fate of polynuclear aromatic hydrocarbons(PAMs) in soil has drawn increasing concern due to their toxic, carcinogenic, and mutagenic effects. These compounds have been most commonly carried into the soil in solvent, as in a coal tar or cresote. This study has been focused on the applicability of microwave treatment of soils contaminated by PAHs. Studies have been conducted with soil(particle diameter $150~500{\mu}m$), which was spiked with naphthalene, acenaphthene, fluorene, anthracene and pyrene, with different moisture contents. According to the results of the research, up to 95% removal efficiency of naphthalene was observed in 10% moisturized soil for five minutes microwave inducing And the removal efficiency of acenaphthene and fluorene were observed to be 88.9%, 67.2% in 30% moisturized soil, respectively. Due to the low vapor pressure, anthracene and pyrene showed the low removal efficiency. In case the powdered activated carbon was added to the soil as a sensitizer, anthracene and pyrene were decomposed into a various by-products. Decomposition rates of anthracene and pyrene were increased with incresing addition of a PAC to the soil. It is concluded that the developement of a microwave process to remediate soils contaminated with PAHs is foreseeable. But additional studies are also needed regarding continuous microwave heating process.

• Elastomers and Composites
• /
• 제33권3호
• /
• pp.201-209
• /
• 1998

고무배합물의 충진제로 사용되는 알루미나 분말의 제조에 있어서 재래식 및 마이크로파 에너지원에 의하여 황산용액중의 카올린으로 부터 알루미나를 얻는다. 이때 카올린으로부터 알루미나 분말의 최대 추출율은 각각 재래식의 경우는 $80^{\circ}C$, 1M 황산, 180분에서 72.8%이고, 마이크로파 추출 공정의 경우는 $90^{\circ}C$, 1m 황산, 60분에서 $99\%$였다. 또한 추출된 시료는 TG/DTA, XRD, SEM, Atomic Emission Spectroscopy 및 BET법에 의하여 분석하였다..

• Advances in nano research
• /
• 제14권6호
• /
• pp.557-573
• /
• 2023

The rapid growth of zinc-oxide (ZnO) nanostructures (NSs) on woven carbon fiber (WCF) is reported in this study employing a microwave-aided chemical bath deposition process. The effects of different process parameters such as molar concentration, microwave duration and microwave power on morphologies and growth rate of the ZnO on WCF were studied. Furthermore, an attempt has been taken to study influence of different type of growth solutions on ZnO morphologies and growth rates. The surface functionalization of WCF fabrics is achieved by successful growth of crystalline ZnO on fiber surface in a very short duration through one-step microwave synthesis. The morphological, structural and compositional studies of ZnO-modified WCF are evaluated using field-emission scanning electron microscopy, X-ray diffraction and energy dispersive X-ray spectroscopy respectively. Good amount of zinc and oxygen has been seen in the surface of WCF. The presence of the wurtzite phase of ZnO having crystallite size 30-40 nm calculated using the Debye Scherrer method enhances the surface characteristics of WCF fabrics. The UV-VIS spectroscopy is used to investigate optical properties of ZnO-modified WCF samples by absorbance, transmittance and reflectance spectra. The variation of different parameters such as dielectric constants, optical conductivity, refractive index and extinction coefficient are examined that revealed the enhancement of optical characteristics of carbon fiber for wide applications in optoelectronic devices, carbon fiber composites and photonics.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2006년도 하계학술대회 논문집 Vol.7
• /
• pp.288-289
• /
• 2006

We studied the effect of sol-gel processing and sintering temperature on the microwave properties of $MgCo_2(VO_4)_2$ system(MCV) which is applicable to LTCC(low-temperature cofired ceramics). The MCV was synthesized by sol-gel process using solution that contains precursor molecules for Mg, Co, and V. SEM analysis shows that the average particle size is ${\sim}1{\mu}m$ and size distribution is very uniform compared to the one prepared by conventional solid-state reaction process. Highly dense samples were obtained at the sintering temperature range of $750^{\circ}C{\sim}930^{\circ}C$. The maximum $Q{\times}f_0$ value of 55,700GHz, dielectric constant(${\varepsilon}_r$) of 10.41 and temperature coefficient(${\tau}_f$) of $-85ppm/^{\circ}C$ was obtained at the sintering temperature of $930^{\circ}C$. The superior microwave properties of sol-gel processed MCV relative to conventional solid-state reaction processed one is remarkable especially at lower sintering temperatures such as $750^{\circ}C$ and $800^{\circ}C$.

• Journal of Ginseng Research
• /
• 제37권3호
• /
• pp.269-272
• /
• 2013

MGB-20 findings show that the ginseng berry extracts that had been processed with microwave and vinegar for 20 min peaked in the level of ginsenoside Rg2 (2.28%) and Rh1 (1.28%). MGB-1 peaked in the level of ginsenoside Rg3 (1.13%) in the ginseng berry extract processed with microwave and vinegar for 1 min.

• 한국식품영양과학회지
• /
• 제25권6호
• /
• pp.951-957
• /
• 1996

당근, 쪽파, 시금치와 같은 채소류에 대한 데치기 실험에서 데치기 시간은 전자레인지 CCT가 빨랐으며, 색도 및 절단강도 변화에서는 데치기 처리로 명암도, 적녹도, 황청도, 절단 강도가 대조구에 비하여 감소하였으며 그 감소 폭은 전자레인지 CCT의 경우가 적었다. 미세구조 관찰에서는 전자레인지 CCT가 NCCT보다 조직 구조가 덜 파괴하는 것으로 나타났으며, vitamin C 함량에서도 전자레인지 CCT가 손실이 적었다.