• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2001년도 하계학술대회 논문집 C
• /
• pp.1829-1831
• /
• 2001

A novel multi-section power divider configuration is proposed to obtain wide-band frequency performance up to microwave frequency region. Design procedures for the proposed microwave broadband power divider are composed of a planar multi-section three-ports hybrid and a waveguide transformer design procedures. The multi-section power divider is based on design theory of the optimum quarter-wave transformer. Furthermore, in order to obtain the broadband isolation performance between the two adjacent output ports, the odd mode equivalent circuit should be matched by using the lossy element such as resistor. The derived design formula for calculating these odd mode matching elements is based on the singly terminated filter design theory. The waveguide transformer section is designed to suppress the propagation of the higher order modes such as waveguide modes due to employing the metallic electric wall. Simulation and experiment show excellent performance of multi section power divider.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2004년도 하계학술대회 논문집 Vol.5 No.2
• /
• pp.761-763
• /
• 2004

최근에 위성용 필터로서 유전체 공진기 내장 도파관 필터가 많이 연구되고 있다. 이 필터의 튜닝을 위하여 튜닝 스크류가 일반적으로 사용되어져 왔는데 튜닝 스크류의 사용은 복잡한 필터의 튜닝 시 너무 소모적인 작업을 야기시키고 미세한 튜닝에 어려움이 있어서 다른 해결책을 필요로 한다. 또한 제품의 사용 시에는 온도등의 외부환경의 변화에 대하여 대처를 하기 위하여 전기적인 튜닝을 이용한 튜닝의 자동화에 대한 필요성이 대두되었다. 이에 대한 해결책으로 BST($Ba_xSr_{1-x}TiO_3$)라는 강유전체를 이용하는 튜닝에 대하여 소개하고 한 경우에 대하여 FDTD 방시의 EM 시뮬레이션을 구하여 그 결과로서 전기저인 필터 튜닝의 가능성을 보여준다.

• KIEE International Transactions on Electrophysics and Applications
• /
• 제4C권6호
• /
• pp.295-299
• /
• 2004

A new design technique of fabricating 40 GHz up-converter modules for digital microwave radios has been developed. The design of the up-converter module is based on unit circuit blocks, which are to be characterized using a special test fixture. The complete module design may be as simple as a cascade layout of these unit circuit blocks. Also, the 40 GHz up-converter module employs a new microstrip-to-waveguide transition and a tapped edge-coupled filter, which are less sensitive to fabrication tolerances.

• 반도체디스플레이기술학회지
• /
• 제14권4호
• /
• pp.88-91
• /
• 2015

In this paper, we have designed and fabricated a BPF (Band Pass Filter) for 5.8GHz Microwave Wireless Power Transmission. We $used{\lambda}g/2$ open-circuited stubs in addition to T-shaped transmission lines for the BPF. This BPF removes harmonics caused by diodes of RF-DC converter, and thus the RF-DC converter converts more RF power to the DC. The performance of the BPF was measured and shown through direct comparison of voltages converted by the doubler as a RF-DC Converter with and without the BPF.

• 반도체디스플레이기술학회지
• /
• 제18권1호
• /
• pp.21-24
• /
• 2019

In this paper, 5.8GHz 25W microwave wireless power transmission system was developed. The transmission system is composed of a signal generator, a 1W drive amplifier, a 25W power amplifier, and a circularly polarized transmission antenna. The receiving system was fabricated with an integrated receiver that combines a circularly polarized receiving antenna, a pass band filter, and an RF-DC converter. And a multi-integrated receiver had twelve parts, including an integrated receiver. Under the conditions, voltage and current were measured for the system at 5cm intervals from a minimum distance of 5cm to a maximum distance of 80cm. The power was calculated for the system. The results of the system are shown in tables and graphs. The power decreases with distance, but the power does not drop sharply due to a multi-integrated receiver.

• 한국통신학회논문지
• /
• 제29권1A호
• /
• pp.77-83
• /
• 2004

초고주파 회로에서 광범위하게 이용되는 평행 결합 마이크로스트립 대역통과필터는 좁은 대역폭 과 2차 스프리어스 통과대역으로 필터의 응용을 제한한다. 이와 같은 문제를 해결하기 위해서 복합 유전체기판상에 비대칭 결합 마이크로스트립 선로를 이용하는 방법을 제시하였다. closed-form해석방법을 이용하여 복합 유전체기판상에 비대칭 결합 마이크로스트립 선로를 해석하고 중심주파수 9GHz 에서 정규화 대역폭 $33\%$을 갖는 필터를 제작하였다. 단층기판을 갖는 필터와 비교하면 복합 유전체기판을 이용한 필터는 스프리어스 통과대역이 약 20dB 이상 개선됨을 보였다

• KIEE International Transactions on Electrophysics and Applications
• /
• 제5C권4호
• /
• pp.176-179
• /
• 2005

The increasing demand for high density packaging technologies and the evolution to mixed digital and analogue devices has been the con-set of increasing research in thin film multi-layer technologies such as the passive components integration technology. In this paper, Cu and TaO thin film with RF sputtering was deposited for spiral inductor and MOM capacitor on the $SiO_2$/Si(100) substrate. MOM capacitor and spiral inductor were fabricated for L-C band pass filter by sputtering and lift-off. We are analyzed and designed thin films L-C passive components for band pass filter at 900 MHz and 1.8 GHz, important devices for mobile communication system. Based on the high-Q values of passive components, MOM capacitor and spiral inductors for L-C band pass filter, a low insertion loss of L-C passive components can be realized with a minimized chip area. The insertion loss was 3 dB for a 1.8 GHz filter, and 5 dB for a 900 MHz filter. This paper also discusses a analysis and practical design to thin-film L-C band pass filter.

• ETRI Journal
• /
• 제43권6호
• /
• pp.957-965
• /
• 2021

A miniaturized wideband band-pass filter with a 3-dB fractional bandwidth of 109.3% (1.53 GHz to 5.22 GHz), high out-of-band attenuation greater than 25 dB, and wide upper stopband up to 14 GHz is proposed. The design consists of a dual-composite right/left handed resonator, embedded open-circuited stub, and a pair of quarter-wavelength short-circuited stubs. These elements are coupled in the near distance to form a miniature filter with a compact occupied area of 0.21 λ_g×0.19 λ_g (≈ 0.013 cm²). The optimized filter has multitransmission poles in the passband, substantially improving the return loss and insertion loss characteristics. The behavior of the passband and stopband is verified against the results of a lumped element model and matrix analysis with a full-wave moment-based analysis and actual measurements. The results of this verification and a comparison with the performance of filters in other references indicate that the proposed filter is very efficient and applicable to compact microwave systems.

• ETRI Journal
• /
• 제25권2호
• /
• pp.133-139
• /
• 2003

We studied how the passive intermodulation (PIM) power arising in air cavity filters could be calculated and how the design of the filter could be optimized in order to reduce the amplitude of the PIM signal. To do this, using simulated results, we optimized the various parameters of a filter. PIM in an air cavity filter depends on the power dissipated in its cavities. A reduction of this power loss therefore decreases the PIM power in the air cavity filter. Our experimental results confirm that it is possible to design and produce air cavity filters that generate low PIM signals.

• 한국ITS학회 논문지
• /
• 제3권2호
• /
• pp.85-93
• /
• 2004

In this paper, microstrip stepped-impedance hairpin resonator (SIR) lowpass filter f.PF) by surface rnicromachining on GaAs substrate is sugsested. This filter has the advantages of compact side, easy fabrication, and sharp cutoff frequency response. The new SIR LPF shows the 3 dB passband of dc to 33 GHz, the insertion loss of 0.82 dB, and the return loss of better than 17 dB up to 25.57 GHz. This filter is useful for many microwave system applications.