• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2012년도 제42회 동계 정기 학술대회 초록집
• /
• pp.501-501
• /
• 2012

A 2.45 GHz electron cyclotron resonance (ECR) plasma source with a belt magnet assembly configuration (BMC) was developed for hyperthermal neutral beam (HNB) generation. A plasma source for high flux HNB generation should be satisfied with the requirements: low pressure operation, high density, and thin plasma. The ECR plasma source with BMC achieved high density at low operation pressure due to electron confinement enhancement caused by high mirror ratio and drifts in toroidal direction. The 2.45 GHz microwave launcher had a circularly bended WR340 waveguide with slits. The microwave E-field profile induced by the microwave launcher was studied in this paper. The E-field profile was a cups field perpendicular to B-filed at ECR zone. The optimized E-field profile and B-field were found for effective ECR heating.

• 전기학회논문지P
• /
• 제58권4호
• /
• pp.465-468
• /
• 2009

The dispersion relation and the characteristic of propagation are measured. The measurements of the dispersion relation are observed by a plunger method employed in slow plasma density by pumping microwaves on the axis are observed in plasma loaded slow wave structure. In case of small incident microwave powers the well known plasma density cavity are observed. At the axial positions of minimal radius in the waveguides, the maxima og the electron density, the plasma potential and the RF electric field are observed in cases of high-power microwaves.

• Applied Science and Convergence Technology
• /
• 제26권2호
• /
• pp.34-41
• /
• 2017

A 2.45 GHz microwave plasma with linear antenna has been prepared for hydrophobic and wear-resistible surface coating of carbon steel. Wear-resistible properties are required for the surface protection of cutting tools and achieved by depositing a hydrogenated amorphous carbon film on steel surface through linear microwave plasma source that has $TE_{10}-TEM$ waveguide. Compared to the existing RF plasma source driven by 13.56 MHz, linear microwave plasma source can easily generate high density plasma and provide faster deposition rate and wider process windows. In this study, $Ar/CH_4$ gas mixtures are used for hydrogenated amorphous carbon film deposition. When microwave power of 1000 W is applied, 40 cm long uniform $Ar/CH_4$ plasma could be obtained in gas pressure of 200~400 mTorr. The Vickers hardness measurement of hydrogenated amorphous carbon film on steel surface was evaluated. It was found the optimized deposition condition at $Ar:CH_4=25:25$ sccm, 300 mTorr with microwave power of 1000W and RF bias power of 100W. By deposition of hydrogenated amorphous carbon film, contact angle on steel surfaces increases from $43.9^{\circ}$ to $93.2^{\circ}$.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2010년도 제39회 하계학술대회 초록집
• /
• pp.94-94
• /
• 2010

As a new plasma source for the plasma enhanced chemical vapor deposition (PCVD) of ${\mu}c$-Si deposition, we have demonstrated a microwave-excited plasma source, which can produce high density (${\sim}10^{12}\;cm^{-3}$) plasma with low electron temperature (~1 eV) and low plasma potential (~10 V). In this plasma source, microwave power radiated from slot antenna is distributed along the plasma-dielectric interface in large area and this enables us to produce uniform high-density plasma in large area. To optimize deposition conditions, deep understanding of gas phase chemistry is indispensable. In this presentation, we will discuss on the gas phase diagnostics of microwave $SiH_4/H_2$ plasma such as $SiH_4$ dissociation or $SiH_3$ radical profile as well as deposited film properties.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2012년도 제42회 동계 정기 학술대회 초록집
• /
• pp.181-181
• /
• 2012

The microwave probe for measuring plasma density is widely used for its advantages: First, it is not affected by the reactive gas. Second, it can measure local plasma parameters such as plasma density, plasma potential and plasma temperature. Third, it is simple and robust. A cut-off probe is the one of the most promising microwave probe. Recently, Kim et al. reveals the physics of the cut-off probe but the effect of the sheath on the determination of the plasma density is not explained. In this presentation, for taking account of sheath effects on determination of plasma density from the cut-off peak, a simplified circuit modeling and an E/M simulation are conducted. The results show that occupation ratio of sheath volume between two tips of the cut-off probe and subsequence pressure condition mainly change position of the cut-off peak with respect to plasma frequency. Magnitude of relative voltage taken on the impedance of sheath and the impedance of bulk plasma can explain this effect. Furthermore, effects of gap size, tip radius, and tip length ware revealed based on above analysis.

• 한국결정성장학회지
• /
• 제15권1호
• /
• pp.10-15
• /
• 2005

Microwave plasma CVD 다이아몬드/Ti 박막 성장 시 CH₄/H₂ 가스의 유량비율, chuck bias, microwave power 등이 다이아몬드 박막의 구조적 특성과 입자밀도에 미치는 영향에 대하여 조사하였다. 2∼3 CH₄ Vol.% 조건일 때 sp³-결합성의 탄소 neutral 들이 우선적으로 형성되고 sp²-결합성의 탄소 neutral 들이 선택적으로 제거됨에 따라 양질의 다이아몬드 박막을 얻을 수 있었으며, 다이아몬드 입자 증착 기구를 해석하였다. Ti 기판에 걸어준 negative chuck bias가 증가함에 따라 다이아몬드 핵생성이 증진되어 다이아몬드 입자 밀도가 증가하였고, 임계 전압은 약 -50V 임을 확인하였다. 또한, microwave power가 증가함에 따라 미세결정질(micro-crystalline) graphite 층 생성이 제어되고 다이아몬드 층이 형성됨을 확인하였다.

• 한국표면공학회지
• /
• 제32권3호
• /
• pp.385-388
• /
• 1999

Electron field emission properties from various CVD diamond films were studied. Diamond films were synthesized by microwave plasma CVD at 1173K and at 673K substrates temperature and pulse microwave plasma CVD at 1173K. B-doped diamond film was synthesized by microwave plasma CVD at 1173K also. Estimation by SEM, both the non-doped diamond film and B-doped diamond film which were synthesized at 1173K substrate temperature were $2~3\mu\textrm{m}$ in diameter and nucleation densities were $10^{8}{\;}numbers/\textrm{cm}^2$ order. The diamond film synthesized at 673K was $0.2\mu\textrm{m}$ in diameter and nucleation densities was 109 numbers/cm2 order. The diamond film synthesized by pulse microwave plasma CVD at 1173K was $0.2\mu\textrm{m}$ in diameter and nucleation density was $10^{9}{\;}numbers/\textrm{cm}^2$ order either. From the result of electron field emission measurement, electron field emission at $20V/\mu\textrm{m}$ from CVD diamond film synthesized by pulse microwave plasma CVD was $37.3\mu\textrm{A}/\textrm{cm}^2$ and the diamond film showed the best field emission property comparison with other CVD diamond.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2016년도 제50회 동계 정기학술대회 초록집
• /
• pp.185.2-185.2
• /
• 2016

The plasma density is an essential plasma parameter describing plasma physics. Furthermore, it affects the throughput and uniformity of plasma processing (etching, deposition, ashing, etc). Therefore, a novel technique for plasma density measurement has been attracting considerable attention. Microwave probe is a promising diagnostic technique. Various type of cutoff, hairpin, impedance, transmission, and absorption probes have been developed and investigated. Recently, based on the basic type of probes, modified flat probe (curling and multipole probes), have been developing for in situ processing plasma monitoring. There is a need for comparative study between the probes. It can give some hints on choosing the reliable probe and application of the probes. In this presentation, we make attempt of numerical study of different kinds of microwave probes. Characteristics of frequency spectrum from probes were analyzed by using three-dimensional electromagnetic simulation. The plasma density, obtained from the spectrum, was compared with simulation input plasma density. The different microwave probe behavior with changes of plasma density, sheath and pressure were found. To confirm the result experimentally, we performed the comparative experiment between cutoff and hairpin probes. The sheath and collision effects are corrected for each probe. The results were reasonably interpreted based on the above simulation.

• Bulletin of the Korean Chemical Society
• /
• 제35권3호
• /
• pp.905-907
• /
• 2014

The plasma and microwave surface treatments of carbon nanotubes that loaded on plastic substrates were carried out with expecting a change of carbon nanotube dispersion by increasing treatment time. The microwave treatment process was undergone by commercial microwave oven (800 W). The electrical property was measured by hall measurement and resistance was increased by increasing $O_2$ flow rate of plasma, suggesting an improvement of carbon nanotube dispersion and a possibility of controlling the resistances of carbon nanotubes by plasma surface treatment. The resistance was increased in both polyethylene terephthalate and polyimide substrates by increasing $O_2$ flow rate. Resistance changes only slightly with different $O_2$ flow treatment in measure rho for all polyimide samples. Sheet resistance is lowest in polyimide substrate not due to high carbon nanotube loading but due to tendency to remain in elongated structure. $O_2$ or $N_2$ plasma treatments on both polyethylene terephthalate and polyimide substrates lead to increase in sheet resistance.

• 한국결정성장학회지
• /
• 제16권1호
• /
• pp.20-24
• /
• 2006

Iridium-catalyzed carbon nanofilaments were formed on MgO substrate as a function of the gap between the substrate and the plasma using microwave plasma-enhanced chemical vapor deposition method. Under the remote plasma condition, carbon nanofibers were formed on the substrate. Under the adjacent plasma condition, on the other hand, carbon nanotubes-like materials instead of carbon nanofibers could be formed. When the substrate immersed into the plasma, any carbon nanofilaments formation couldn't be observed. During the reaction, the substrate temperatures were measured as a function of the gap. Based on these results, the cause for the different carbon nanofilaments formation according to the gap was discussed.