• Journal of Environmental Health Sciences
• /
• v.49 no.2
• /
• pp.66-77
• /
• 2023

Background: Along with the increase in consumer interest in and consumption of tattoo products, the controversy over harmful heavy metals associated with the use of tattoo cosmetics is also increasing. Therefore, investigation of hazardous metals in these tattoo products is needed. Objectives: This study was performed to provide useful data for establishing reasonable standards to securely manage tattoo cosmetics, tattoo stickers, and tattoo inks distributed in the market. Methods: Thirteen kinds of hazardous metal contents (Pb, As, Cd, Sb, Ni, Co, Cu, Cr, Se, Ba, Zn, Sn, and Hg) were analyzed for 23 tattoo cosmetics, ten tattoo stickers, and 16 tattoo inks. Hg was measured through the combustion-gold amalgamation method, and other hazardous metals were measured by inductively coupled plasma-mass spectrometry (ICP-MS) after acidic decomposition using a microwave apparatus. Results: The detected ranges of Pb, As, Cd, Sb, Ni, and Hg in tattoo cosmetics were 0.07~1.18, 0.06~0.41, ND~0.07, 0.01~3.44, 0.12~2.75, and ND~0.01 ㎍/g, respectively. All of the hazardous metals detected were below the recommended maximum standards of the Ministry of Food and Drug Safety. The mean amount of Pb detected in tattoo stickers for children was 0.24 ㎍/kg and Cd was not detected, meaning both metals met the recommended criteria. There was no statistically significant difference in all measured metals between children's tattoo stickers and adults' tattoo stickers. In the results of the study on the hazardous metal content of tattoo inks, four products (25%) for Pb, one product (6%) for As, 13 products (81%) for Ni, four products (25%) for Cu, and five products (31%) for Zn exceeded the recommended standards approved by the government. The highest predicted exposure amount for hazardous metals exceeding the recommended level of tattoo inks in a single tattooing was 5.69 ㎍/kg for Ni, 8.51 ㎍/kg for Zn, 0.44 ㎍/kg for Pb, 8.07 ㎍/kg for Cu, 0.44 ㎍/kg for As, and 71.36 ㎍/kg for Ba. Conclusions: It is necessary to prepare criteria for content limitation for the management of Co, Cr, Ba and Se tattoo cosmetics, and tattoo inks require thorough quality control.

• Journal of Food Hygiene and Safety
• /
• v.13 no.4
• /
• pp.441-447
• /
• 1998

This study was performed to investigate the changes of amount of S. typhimurium during cooking processes using pork and japchae (a Korean food which is made from meat, vegetables and noodles), and to support a practical application to develop a hazard analysis critical control point (HACCP) model. The pork was purchased in a retail shop, cut ($0.5\;cm\;{\times}\;10\;cm\;{\times}\;10\;cm$, 25 g), tested for Salmonella contamination (results: negative), inoculated with S. typhimurium ($10^{7}\;CFU/g$), then treated in various conditions related to cooking. Mter thawing for 24 hours in various conditions, the number of S. typhimurium was increased to $10^{10}\;CFU/g$ at a refrigerated temperature ($4~10^{\circ}C$), and to $10^{21}\;CFU/g$ at room temperature ($22~29^{\circ}C$). Mter thawing in a microwave oven for 40 seconds, the number of S. typhimurium increased to $10^{8}\;CFU/g$. During the thawing period, the number of S. typhimurium increased over time. At the refrigerated temperature, the number of the bacteria was $10^{10}\;CFU/g$ after 24 hours, $10^{13}\;CFU/g$ after 48 hours, and $10^{20}\;CFU/g$ after 72 hours. At room temperature the number of bacteria reached $10^{11}\;CFU/g$ in 2 hours, $10^{15}\;CFU/g$ in 4 hours, $10^{16}\;CFU/g$ in 8 hours, $10^{18}\;CFU/g$ in 12 hours, and $10^{21}\;CFU/g$ in 24 hours. Mter cooking in a frying pan (150{\pm}7^{\circ}C$) for 3 minutes, the bacterial count was $10^{16}\;CFU/g$. After cooking in hot water for 20 minutes, the bacterial count was $10^{7}\;CFU/g\;at\;60^{\circ}C,\;10^{6}\;CFU/g\;at\;63^{\circ}C,\;and\;10^{4}\;CFU/g\;at\;65^{\circ}C$. The fried pork was mixed with cooked vegetables, noodles, sesame oil, sesame seeds, and seasonings to make Korean japchae. This process took $10{\pm}2$ minutes. The bacterial count in the japchae increased to $10^{7}\;CFU/g$ from the count of $10^{6}\;CFU/g$ of the fried pork before it was mixed with the other ingredients. These results indicate that the amount of S. typhimurium is effected by various different cooking processes. This study can suggest that pork should be cooked in water at over $65^{\circ}C$ for 20 minutes in order to prevent food poisoning, if the pork is contaminated with S. typhimurium. The presence of S. typhimurium in the raw pork is identified in an HA for japchae, and the primary CCP for japchae is inadequate cooking (cooking method and time/temperature). We need to standardize time-temperature-size and amount of pork in cooking japchae, because pork is usually cooked in ordinary frying pans when we make this food.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.17 no.5
• /
• pp.353-360
• /
• 1984

As an effort to expand the utilization of mackerel which has been thought disadvantageous to processors due to the defects in bloody dark color of meat, high content of lipid, and low stability of protein, and to develope a new type of product, so called, preservative fish meat paste, the processing method was studied in which dielectric heating was applied by means of cooking, pasteurization, dehydration, and control of water activity. The principle of this method is based on that dielectric heating can initiate a rapid dispersion or displacement of moisture in the meat tissue so that the level of water acivity can be controlled by dehydration with hot air meanwhile the product is cooked, pasteurized, and texturized. And the product is finally heated with electric heaters and vacuum sealed to stabilize water activity and storage stability. In present paper, a formula for preparing the fish meat-stach paste, the conditions of dielectric heating and dehydration, shape and size of the product, and other parameters were tested to optimize the process operation. A formula of the fish meat-starch paste to provide proper textural properties and water activity was $10\%$ starch, $1.5\%$ salt, $3\%$ soybean, $0.6\%$ MSG, $2\%$ sucrose, and $3\%$ sorbitol against the weight of fish meat. A proper shape and size of the product to avoid foaming and case hardening during heating was sliced disc of 8 cm $diameter{\times}0.8$ cm thickness or $10{\times}10$ cm square plate with 1.0 cm thickness. The disc shape was recommended because it resulted more uniform heating, minimum foaming and case hardening. And it was also advantageous that disc was simply provided when the fish meat disc was stuffed in the same, solidified in boiling water for 2 to 3 minutes, and sliced. Condition of dielectric heating was critical to decide the levels of sterility, water activity, and textural property of the product. The temperature at the center of the meat disc slices was raised up to $95^{\circ}C$ in 1.5 minutes so that continuous exposure to microwave caused expanded tissue and hardening ending up with a higher water content. Heating for 5 to 6 minutes was adequate to yield the final water activity of 0.86 to 0.83(35 to $40\%$ moisture). It is important, however, that heating had to be done periodically, for instance, in the manner of 2.0, 1.5, 1.5, and 1.0 minute to give enough time to displace or evaporate moisture from the meat tissue. The product was dehydrated for 2 to 3 minutes by hot air of $60^{\circ}C$, 3 to 5m/sec and finally exposed to electric heaters for 5 to 6 minutes until the surface was roasted deep brown. These conditions of heating and dehydration resulted in a complete reduction of total plate count from an initial count of $5.3{\times}10^6/g$ to less than $3{\times}10^2/g$. General composition of the product was $40.1\%$ moisture, $20.8\%$ protein, $17.4\%$ lipid, $16.2\%$ carbohydrate, and $5.5\%$ ash. Textural properties revealed folding test AA, hardness 42, cohesiveness 0.53, toughness 4.6, and elasticity 0.8.

• Journal of Chest Surgery
• /
• v.40 no.9
• /
• pp.600-606
• /
• 2007

Background: Infective endocarditis shows high surgical mortality and morbidity rates, especially for aortic endocarditis. This study attempts to investigate the clinical characteristics and operative results of isolated aortic endocarditis. Material and Method: From July 1990 to May 2005, 25 patients with isolated aortic endocarditis (Group I, male female=18 : 7, mean age $43.2{\pm}18.6$ years) and 23 patients with isolated mitral endocarditis (Group II, male female=10 : 13, mean age $43.2{\pm}17.1$ years) underwent surgical treatment in our hospital. All the patients had native endocarditis and 7 patients showed a bicuspid aortic valve in Group I. Two patients had prosthetic valve endocarditis and one patients developed mitral endocarditis after a mitral valvuloplasty in Group II. Positive blood cultures were obtained from 11 (44.0%) patients in Group I, and 10 (43.3%) patients in Group II, The pre-operative left ventricular ejection fraction for each group was $60.8{\pm}8.7%$ and $62.1{\pm}8.1%$ (p=0.945), respectively. There was moderate to severe aortic regurgitation in 18 patients and vegetations were detected in 17 patients in Group I. There was moderate to severe mitral regurgitation in 19 patients and vegetations were found in 18 patients in Group II. One patient had a ventricular septal defect and another patient underwent a Maze operation with microwaves due to atrial fibrillation. We performed echocardiography before discharge and each year during follow-up. The mean follow-up period was $37.2{\pm}23.5$ (range $9{\sim}123$) months. Result: Postoperative complications included three cases of low cardiac output in Group I and one case each of re-surgery because of bleeding and low cardiac output in Group II. One patient died from an intra-cranial hemorrhage on the first day after surgery in Group I, but there were no early deaths in Group II. The 1, 3-, and 5-year valve related event free rates were 92.0%, 88.0%, and 88.0% for Group I patients, and 91.3%, 76.0%, and 76.0% for Group II patients, respectively. The 1, 3-, and 5-year survival rates were 96.0%, 96.0%, and 96.0% for Group I patients, and foo%, 84.9%, and 84.9% for Group II patients, respectively. Conclusion: Acceptable surgical results and mid-term clinical results for aortic endocarditis were seen.

• Journal of Food Hygiene and Safety
• /
• v.27 no.4
• /
• pp.375-387
• /
• 2012

The objective of this study is investigation of contamination levels and assessment of health risk effects of heavy metals in herbal pills. 31 Items and 93 samples were obtained for this investigation from major herbal medicine producing areas, herbal markets and on-line supermarkets from Jan to Jun in 2010. Inductively coupled plasma mass spectrometer method was conducted for the quantitative analysis of Pb, Cd and As. In addition, the mercury analyzer system was conducted for that of Hg without sample digestion. The average contents of heavy metals in samples were as follows : 0.87 mg/kg for Pb, 0.08 mg/kg for Cd, 2.87 mg/kg for As and 0.16 mg/kg for Hg, respectively. In addition, the average contents of heavy metals in different parts of plants, including cortex, fructus, herba, radix, seed, algae and others were 0.63 mg/kg, 3.94 mg/kg, 1.42 mg/kg, 1.05 mg/kg, 0.16 mg/kg, 22.31 mg/kg and 10.17 mg/kg, respectively. After the estimations of dietary exposure, the acceptable daily intake (ADI), the average daily dose (ADD), the provisional tolerable weekly intake (PTWI) and the relative hazard of heavy metals were evaluated. As the results, the relative hazards compared to PTWI in samples were below the recommended standard of JECFA as Pb 3.1%, Cd 0.9%, Hg 0.5%. Cancer risks through slope factor (SF) by Ministry of Environment Republic Korea and Environmental Protection Agency was $4.24{\times}10^{-7}$ for Pb and $3.38{\times}10^{-4}$ for As (assuming that the total arsenic content was equal to the inorganic arsenic). Based on our results, possible Pb-induced cancer risks in herbal pills according to parts used including cortex, fructus, herba, radix, seed, algae and others were $1.95{\times}10^{-7}$, $1.45{\times}10^{-6}$, $2.14{\times}10^{-7}$, $6.27{\times}10^{-7}$, $1.99{\times}10^{-8}$, $3.61{\times}10^{-7}$ and $9.64{\times}10^{-8}$, respectively. Possible As-induced cancer risks in herbal pills by parts used including cortex, fructus, herba, radix, seed, algae and others were $1.54{\times}10^{-5}$, $7.24{\times}10^{-5}$, $1.23{\times}10^{-4}$, $2.02{\times}10^{-5}$, $3.25{\times}10^{-6}$, $2.18{\times}10^{-3}$ and $5.67{\times}10^{-6}$ respectively. Taken together, these results indicate that the majority of samples except for some samples with relative high contents of heavy metals were safe.