• 제목/요약/키워드: Microstrip line

검색결과 710건 처리시간 0.029초

UHF대역에서 동작하는 마이크로스트립라인을 이용한 VCO 제작 (VCO fabrication using Microstrip Line operating at the UHF frequency band)

  • 이동희;정진휘
    • 한국전기전자재료학회:학술대회논문집
    • /
    • 한국전기전자재료학회 2001년도 춘계학술대회 논문집 유기절연재료 전자세라믹 방전플라즈마 연구회
    • /
    • pp.153-156
    • /
    • 2001
  • In this paper, we present the results of the design and fabrication of the VCO(Voltage controlled Oscillator) using RF circuit simulator GENESYS and electromagnetic field simulator EMpower Frequency range is fabricated VCO is 850 MHz ~ 950 MHz, which is used Colpitts Circuit. the fabricated VCO is consisted of resonator, oscillator and MSL(Microstrip Line) is used in LC tuning circuit.(operated by negative feedback) MSL(Microstrip Line), Varactor(Plastic package), low noise TR(SOT-23), chip inductor(1608), chip capacitor(1005), chip resistance(1005). 1005 type is used for sample fabrication of VCO. In the fabrication process, circuit pattern is screen printed on the alumina substrates of over 99.9% purity. Center frequency of the sample VCO is 850MHz at $V_T$=1.5V, while the simulated value was 1.0GHz at $V_T$=1.5V. Variable frequency range of the sample is 860~950MHz in contrast to the 1068~1100MHz of the simulated values.

  • PDF

Numerical Analysis of Loss Power Properties in the Near-Field Electromagnetic Wave Through A Microstrip Line for Multilayer Magnetic Films with Different Levels of Electrical Conductivity

  • Lee, Jung-Hwan;Kim, Sang-Woo
    • Journal of Magnetics
    • /
    • 제13권3호
    • /
    • pp.92-96
    • /
    • 2008
  • There are few reports of high frequency loss behavior in the near-field for magnetic films with semiconducting properties, even though semiconducting magnetic materials, such as soft magnetic amorphous alloys and nanocrystalline thin films, have been demonstrated. The electromagnetic loss behavior of multilayer magnetic films with semiconducting properties on the microstrip line in quasi-microwave frequency band was analyzed numerically using a commercial finite-element based electromagnetic solver. The large increase in the absorption performance and broadband characteristics of the semiconducting/insulating layer magnetic films examined in this study were attributed to an increase in the loss factor of resistive loss. The electromagnetic reflection increased significantly with increasing conductivity, and the loss power deteriorated significantly. The numerical results of the magnetic field distribution showed that a strong radiated signal on the microstrip line was emitted with increasing conductivity and decreasing film thickness due to re-reflection of the radiated wave from the surface of the magnetic film, even though the emitted levels varied with film thickness.

E-면 결합을 이용한 구형 마이크로스트립 안테나에 관한 실험적 연구 : 마이크로스트립 선로 급전 (Experimental Study on the E-plane Coupled Rec tangular Microstrip Patch Antennas:Microstrip Line Fed Case)

  • 홍재표;조영기;손현
    • 한국통신학회논문지
    • /
    • 제14권1호
    • /
    • pp.75-83
    • /
    • 1989
  • 본 논문에서는 복사면 가장자리가 결합된 두 구형 마이크로스트립안테나에, 패치 사이의 복사면 가장자리의 결합을 특성화하는 REC 모델을 적용하여 여러가지 결합간격에 대해 산란계수 $\mid$ $S_{11}$ $\mid$$\mid$ $S_{12}$ $\mid$를 구하였으며, 이를 실험치와 비교하였다. 그리고 복사면 가장자리에서의 결합을 이용한 기생소자를 갖는 구형 마이크로스트립 안테나에, REC 모델을 적용하여 궤환 손실을 구한 뒤 실험치와 비교하였다. 여기서 각각의 안테나는 50$\Omega$ 마이크로스트립 선로에 의해 급전한 결과를 다루었으며, 이는 REC 모델을 이론적으로 제시하여 동축선로로 급전한 결과$^{(10)}$와 비교하기 위한 논문이다.

  • PDF

결합 선로를 이용한 브랜치 선로 방향성 결합기 (Branch line directional coupler with coupled lines)

  • 한대현
    • 한국정보통신학회논문지
    • /
    • 제15권2호
    • /
    • pp.286-291
    • /
    • 2011
  • 방향성 결합기는 RF 및 마이크로파 대역에서 신호를 분배하거나 감시하는 데 이용된다. 본 논문에서는 마이크로스트립 선로로 구현한 결합선로를 이용한 새로운 구조의 브랜치 선로 방향성 결합기를 제안하였다. 브랜치 선로 방향성 결합기는 결합도가 낮아지면 병렬로 연결된 선로의 특성 임피던스가 높아서 마이크로스트립 선로로 구현하기 어려워진다. 이를 극복하기 위하여 단락된 평형 결합 선로를 이용하여 높은 특성 임피던스를 구현하였다. 제안한 브랜치 선로 방향성 결합기의 시뮬레이션 결과 및 제작하여 측정한 결과를 보였다. 제작한 10 dB 브랜치 선로 방향성 결합기는 10% 대역폭에서 반사 손실이 30 dB 이상, 8% 대역폭에서 고립도 35 dB 이상인 결과를 보였다.

Fin-line taper를 이용한 W-대역 마이크로스트립-도파관 전이구조 설계 (Design of W-band Microstrip-to-Waveguide Transition Structure Using Fin-line Taper)

  • 김영곤;용명훈;이현건;주지한;안세환;서미희
    • 한국인터넷방송통신학회논문지
    • /
    • 제22권3호
    • /
    • pp.37-42
    • /
    • 2022
  • 본 논문에서는 낮은 삽입 손실을 가지는 광대역 마이크로스트립-도파관 전이구조를 제안하였다. 제안하는 전이구조는 자연스러운 전계분포의 필드 변환과 마이크로스트립 선로와 fin-line 사이의 임피던스 정합의 관점에서 설계되었다. Offset DSPSL (double-sided parallel stripline)을 이용한 fin-line 테이퍼로 전이구조의 길이 및 그 구조를 결정할 수 있도록 하였다. 제작된 전이구조의 특성은 전이구조 당 85 ~ 108 GHz의 대역에서 0.67 dB 이하의 낮은 삽입 손실을 가지고 있으며, 83 ~ 110 GHz 이상의 대역에서 1 dB 이하의 삽입 손실을 가짐을 확인하였다. 본 논문에서 제시한 전이구조를 이용하여 W-대역의 초소형 레이다 및 다양한 응용 분야에 적용 가능하리라 예상된다.

마이크로스트립 선형 테이퍼형 슬롯 안테나 설계 (Design of A Microstrip Linear Tapered Slot Antenna)

  • 장재삼;김철복;이호상;정영호;조동기;이문수
    • 대한전자공학회논문지TC
    • /
    • 제45권5호
    • /
    • pp.40-45
    • /
    • 2008
  • 본 연구에서는 위상배열 안테나의 기본방사소자로 사용될 선형 테이퍼형 슬롯 안테나를 설계 제작하여 그 특성을 실험적으로 고찰 한다. 테이퍼형 슬롯 안테나(TSA)는 박막, 경량, 간단한 제조와 고주파 단일 집적회로에 적합하다. 또한, 멀티 옥타브 대역폭, 적절한 높은 이득, 대칭적인 E-면과 H-면 방사패턴을 가진다. 마이크로스트핍 선형 테이퍼형 안테나의 급전회로는 마이크로스트립-슬롯 선로간의 트랜지션을 사용한다. 트랜지션은 두 면으로 이루어진다. 한쪽 면은 마이크로스트립 선로이고, 다른 한쪽은 슬롯 선로를 가지는 구조이다. 마이크로스트립 과 슬롯 선로의 길이는 마이크로스트립과 슬롯 선로의 교차면의 중앙에서 ${\lambda}_m/4$${\lambda}_s/4$이다. 넓은 대역폭을 얻기 위하여, 슬롯 선로의 종단부의 폭은 $1.75{\lambda}_o$로 하고, 큰 지향성을 얻기 위하여 슬롯 선로의 테이퍼된 길이는 $4{\lambda}_o$로 한다. 실험결과 마이크로스트립 선형 테이퍼형 슬롯 안테나는 5GHz의 중심 주파수에서 약 5GHz의 대역폭을 가지고, 대칭적인 E-면과 H-면 방사패턴을 가진다.

데이퍼형 마이크로 스트립 선로에서 분산과 반사가 펄스의 왜곡에 미치는 영향 (An effects of the Pulse Distortion due to Dispersion and Reflection on Tapered Microstrip Line)

  • 김기래
    • 대한전자공학회:학술대회논문집
    • /
    • 대한전자공학회 2000년도 하계종합학술대회 논문집(1)
    • /
    • pp.271-274
    • /
    • 2000
  • In this paper, the distortion of an electrical pulse with rise/fall time resulting from dispersion and reflection as it propagates along a tapered microstrip line is investigated, and the delay time and distortion rate with respect to input and load impedances are analyzed on triangular and exponential tapered lines and analyzed the influence of the reflection and frequency dispersion on the distorted voltage wave in the tapered lines. The observed overshoot in front of the distorted wave is caused due to the frequency dispersion and the sustained tail of that comes from the reflection in the tapered line.

  • PDF

CPW 구조를 이용한 metamaterial 전송선로 특성에 관한 연구 (A study of metamaterial transmission line characteristics using CPW structure)

  • 김진수;황희용
    • 산업기술연구
    • /
    • 제28권B호
    • /
    • pp.251-255
    • /
    • 2008
  • Metamaterial are artificial structures that can be designed to exhibit specific electromagnetic properties not commonly found in nature. Metamaterial transmission lines are usually fabricated with a microstrip structure and it's equivalent circuit is composed of two series capacitances and a shunt inductance. However microstrip structure need a via hall for realizing a shunt inductance. To eliminate via hall, we proposed a CRLH transmission line using a CPW structure, and obtained equivalent circuit values, line parameters.

  • PDF

Basic Study on RF Characteristics of Thin-Film Transmission Line Employing ML/CPW Composite Structure on Silicon Substrate and Its Application to a Highly Miniaturized Impedance Transformer

  • Jeong, Jang-Hyeon;Son, Ki-Jun;Yun, Young
    • Transactions on Electrical and Electronic Materials
    • /
    • 제16권1호
    • /
    • pp.10-15
    • /
    • 2015
  • A thin-film transmission line (TFTL) employing a microstrip line/coplanar waveguide (ML/CPW) was fabricated on a silicon substrate for application to a miniaturized on-chip RF component, and the RF characteristics of the device with the proposed structure were investigated. The TFTL employing a ML/CPW composite structure exhibited a shorter wavelength than that of a conventional coplanar waveguide and that of a thin-film microstrip line. When the TFTL with the proposed structure was fabricated to have a length of ${\lambda}/8$, it showed a loss of less than 1.12 dB at up to 30 GHz. The improvement in the periodic capacitance of the TFTL caused for the propagation constant, ${\beta}$, and the effective permittivity, ${\varepsilon}_{eff}$, to have values higher than those of a device with only a conventional coplanar waveguide and a thin film microstrip line. The TFTL with the proposed structure showed a ${\beta}$ of 0.53~2.96 rad/mm and an ${\varepsilon}_{eff}$ of 22.3~25.3 when operating from 5 to 30 GHz. A highly miniaturized impedance transformer was fabricated on a silicon substrate using the proposed TFTL for application to a low-impedance transformation for broadband. The size of the impedance transformer was 0.01 mm2, which is only 1.04% of the size of a transformer fabricated using a conventional coplanar waveguide on a silicon substrate. The impedance transformer showed excellent RF performance for broadband.

마이크로스트립 구조의 신호선에 의한 방사성 간섭 예측모델 (Simple RE Prediction Model of the Signal Line of the Microstrip Structure)

  • 주정호;장건호;강승택;김형석
    • 한국정보통신설비학회:학술대회논문집
    • /
    • 한국정보통신설비학회 2007년도 학술대회
    • /
    • pp.31-33
    • /
    • 2007
  • This work presents the simplified mechanism that the microstrip line generates the radiated emission which is one of the measures on the EMI levels. The electric currents on the metallization of the structure are input to the radiation integrals with the Green's functions being derived to consider the stratification of the microstrip. The simulated results suggest the method of the conceptualization on the RE characteristics of the signal trace in the PCB structure.

  • PDF