• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.6 no.3
• /
• pp.440-444
• /
• 2002

A microstrip patch antenna with circular polarization based on the Sierpinski fractal geometry is proposed. The Sierpinski fractal is composed of 3 equilaterial triangular patch and is easy to produce a circular polarization by sequentially rotation techniques. The characteristics of a 1x3 antenna array from Sierpinski geometry are investigated, i.e. port isolation and AR(axial Ratio).

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.11 no.1
• /
• pp.125-129
• /
• 2010

This paper introduces an X-band microstrip patch array antenna that can be suitable for an energy saving system. The presented patch antenna comprises with 2-element linear array. The antenna is simulated using CST MWS and manufactured using FR-4(h=1.0mm, ${\varepsilon}r=4.4$). The estimated bandwidth, gain and beamwidth are 4%(VSWR$\leq$2), 6.3dBi and about 60o in elevation and 15o in azimuth, respectively. The antenna is fabricated and optimized based on the simulation result and installed on the backside of the sensor circuit and measured. The measured bandwidth, gain and beamwidth are 7%(VSWR$\leq$2), 4.8dBi and about 55o(El)/15o(Az), respectively.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.29 no.9A
• /
• pp.1083-1090
• /
• 2004

In this paper, a meander-type microstrip patch antenna for application in 5GHz-hand is designed and fabricated To obtain enough bandwidth in VSWR≶2, the foam is inserted between substrate and ground plane, the coaxial probe source 1S used Antenna is simulated varing the length and width of meander line, the position of probe feeding and the thick of airgap. Later antenna is fabricated with optimizated antenna parameter. The measured result of Fabricated antenna obtained IGHz(l7.5%) bandwidth in VSWR≶2, the gain of 7.3-9.5dBi, Unidirectional pattern.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.18 no.3 s.118
• /
• pp.323-333
• /
• 2007

In this paper, a new MDAS-DR antenna structure designed to efficiently shape a flat-topped radiation pattern is proposed. The antenna structure is composed of a stacked micro-strip patch exciter and a multi-layered disk array structure(MDAS) surrounded by a dielectric ring. The MDAS, which was supplied by a stacked microstrip patch exciter with radiating power, can form a flat-topped radiation pattern in a far field by a mutual interaction with the surrounding dielectric ring. Therefore, the design parameters of the dielectric ring and the MDAS structure are important design parameters for shaping a flat-topped radiation pattern. The proposed antenna used twelve multi-layered disk array elements and a Teflon material with a dielectric constant of 2.05. An antenna operated at 10 GHz$(9.6\sim10.4\;GHz)$ was designed in order to verify the effectiveness of the proposed antenna structure. The commercial simulator of CST Microwave $Studio^{TM}$, which was adapted to a 3-D antenna structure analysis, was used for the simulation. The antenna breadboard was also fabricated and its electrical performance was measured in an anechoic antenna chamber. The measured results of the antenna breadboard with a flat-topped radiation pattern were found to be in good agreement with the simulated one. The MDAS-DR antenna gain measured at 10 GHz was 11.18 dBi, and the MDAS-DR antenna was capable of shaping a good flat-topped radiation pattern with a beam-width of about $40^{\circ}$, at least within a fractional bandwidth of 8.0 %.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.10 no.7
• /
• pp.1022-1032
• /
• 1999

The radiation characteristics of a microstrip circularly-polarized aperture-patch $8\times8$ array antenna are investigated at X-band. The radiator consists of a truncated square aperture on the ground plane with an inclined rectangular patch inside, and it is coupled by a microstrip line on the opposite side of the ground. The element spacing of the array was chosen as $0.8\lambda_0$so as to minimize the mutual coupling and maximize the gain. A corporate feed network was employed to distribute the power to each element through four Wilkinson and two T-junction dividers. Measurement results for the $8\times8$ array at 10 GHz showed a directivity of 26.3 dBi, a gain of 22.2 dBi, an axial ratio of 2.97 dB, and a side lobe level of -12.7dB. It was observed that when the array size increases, the directivity increases while the efficiency decreases.

• Proceedings of the Korean Institute of Communication Sciences Conference
• /
• 2006.07a
• /
• pp.700-700
• /
• 2006

• 한국ITS학회:학술대회논문집
• /
• v.2007 no.10
• /
• pp.136-140
• /
• 2007

• Proceedings of the Korean Institute of Communication Sciences Conference
• /
• 2004.07a
• /
• pp.80-80
• /
• 2004

• Proceedings of the Korean Institute of Communication Sciences Conference
• /
• 2004.07a
• /
• pp.83-83
• /
• 2004

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2007.10a
• /
• pp.849-852
• /
• 2007

In this paper, the high gain and the broadband microstrip patch antenna, which is applicable to 5 GHz band wireless LAN, is designed in order to integrate IEEE 802.11a's detailed standards($a:5.15{\sim}5.25$, $b:5.25{\sim}5.35$, $c:5.725{\sim}5.875$ [GHz]). Designed patch antenna has settled resonance frequency by insert substance(polyurethane: ${\varepsilon}_r=6.5$) between the separated parasitic patch and radiation patch for the purpose of miniaturize. And the form (${\varepsilon}_r=1.03$) were to fix the separated radiation patch and ground plans by air. Designed frequency bandwidth(VSWR 2:1) of the antenna showed broadband characteristic of $4.9[GHz]{\sim}6.1[GHz]$ to about 1.2[GHz]. Also the E-plan and H-plan profit 12[dBi] above, the 3[dB] beamwidth showed the characteristic over the E-plan $30^{\circ}$ and H-plan $60^{\circ}$ to be improved.