• 대한전자공학회논문지TC
• /
• 제44권3호
• /
• pp.26-32
• /
• 2007

개구면 결합 공진기 급전 마이크로스트립 패치 안테나의 단순하고도 정확한 등가 회로를 추출한다. 이 등가회로는 이상적인 트랜스포머, 어드미턴스 소자, 그리고 전송선으로 구성되고 각 소자 값들은 가역 정리와 스펙트럼 영역 이미턴스 방법에 기반한 복소 전력 개념으로부터 구할 수 있다. 기 게재된 논문의 연구 결과를 이용하여 제안한 등가회로의 타당성을 검증한 후 이중 대역 안테나를 유전 알고리즘과 Holder-Mead 방법을 통한 이종 진화적 최적화 방법으로 설계하였다. 설계 목표치에 적합한 결과를 도출하였고, 이 결과는 이종 진화적 최적화 방법이 설계에 매우 효율직임을 확인해 준다.

• 전자공학회논문지A
• /
• 제31A권8호
• /
• pp.16-25
• /
• 1994

The prediction of crosstalk in one of important problems in estimating the EMC of a system for high speed digital signal transmission. Crosstalk curves are shown in terms of characteristic impedance of lines spacing between lines and rise time of pulse by using general multiple coupled transmission line equation and harmonic-balance method. The coupled symmetrical two-line on dielectric material epoxy-glass FR 4(${\varepsilon}_r$), is fabricated to measure crosstalk occuring at the near end and far end of the passive line. The inter-line is inserted to reduce crosstalk between two microstrip lines. The simulation results and the measurement results are shown and found to be very close.

• 전자공학회논문지D
• /
• 제35D권1호
• /
• pp.8-15
• /
• 1998

An analysis of the microstripline is started as an assumption of the axial & transveral current distribution. Applying the boundary conditions to the scalar wave equations of a electric & magnetic potential, the two simultaneous coupled integral equations are produced. The electronmagnetic fields in microstrip line can be obtained by solving these two coupled integral equaltion. In general, either a numerical analysis method or a Galerkin method was used to solve them. In this paper, a residue theorem is proposed to solve them. The electromagnetic fields are expressed as integral equations for LSE and LSM mode in the spectral domain. Applying a residue theorem to the Fourier transformed equation and Fourier inverse transformed equation which is necessary for interchanging the space domain and the spectral domain, the electromagnetic fields are expressed as algebraic equations whichare relatively easier to handle. the distributions of the electromagnetic field are shown at the range of -5w/2.leq.x.leq.5w/2, 0.lep.y.leq.4h for z=0. It agrees well with the results of the Quasi-TEM mode analysis.

• 한국통신학회논문지
• /
• 제22권9호
• /
• pp.1949-1956
• /
• 1997

Closed form 해석 방법을 이용하여 복합기판상에 비대칭 결합 마이크로스트립 선로의 모드 파라미터를 구하였다. 단층기판과 복합기판상에 대칭 및 비대칭 결합 마이크로스트립 선로을 이용하여 방향성 결합기를 실현시켰다. 중심주파수 1.8GHz에서 10dB 방향성 결합기를 제작하여 측정한 결과, 복합기판을 갖는 결합기는 단층기판을 이용한 결합기보다 결합도와 방향성도가 개선되었다. 또한 비대칭 결합 마이크로스트립 선로를 이용한 결합기의 대역폭이 대칭 결합 마이크로스트립 선로를 이용한 결합기보다 대역폭이 넓다는 것을 확인하였다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2000년도 하계학술대회 논문집 C
• /
• pp.2213-2215
• /
• 2000

In this paper we implemented a novel re-entrant mode microstrip directional coupler for realizing the high directivity characteristic using finite element (FE) analysis. In microstrip configuration, the high directivity can be reached by matching the even- and odd-mode effective phase velocities. Through the values of capacitance obtained from 2-dimensional finite element(FE) analysis, the phase velocities for each mode and the design parameter were extracted for the proposed coupled-line configuration. Based on the extracted design parameter with phase matching condition we designed and fabricated 30dB directional coupler at 850MHz. Experimental results show good performance with excellent isolation.

• 대한전기학회논문지:전기물성ㆍ응용부문C
• /
• 제50권5호
• /
• pp.238-242
• /
• 2001

In this paper, we extracted design parameters for re-entrant mode microstrip directional coupler using FE(finite element) calculations. The microstrip directional coupler suffers from a poor directivity due to effect of the inhomogeneous dielectric including both dielectric substrate and air in microstrip transmission lines. Thus, the phase velocity of even mode is not equal to that of odd mode. In order to improve the directivity of microstrip directional coupler, a novel re-entrant mode microstrip directional coupler was employed. In microstrip configuration, the high directivity can be reached by matching the even- and odd-mode effective phase velocities. Through the values of capacitance obtained from 2-dimensional FE calculations, the phase velocities for each mode and the design parameter were extracted for the proposed parallel coupled-line configuration. Based on the extracted design parameter with phase matching condition, we designed and fabricated a 30dB directional coupler at 0.85GHz. Experimental results show good performance with excellent, isolation and directivity.

• 한국전자파학회논문지
• /
• 제18권5호
• /
• pp.547-552
• /
• 2007

본 논문에서는 두 마이크로스트립 라인으로 이루어진 헤어핀 형태의 결합 선로를 이용하여 특성이 개선된 링 하이브리드를 설계하였다. 제안한 구조는 링 하이브리드의 $\lambda/4$ 라인에 헤어핀 형태의 결합 선로를 삽입하여 두 선로가 가까워짐에 따라 선로간의 커플링으로 세 개의 감쇠극이 생겨 넓은 저지대역을 갖는 결합 선로 구조를 이용하여 구성함으로써 링 하이브리드의 크기 감소뿐만 아니라 고조파 제거 특성도 부가하였다. 중심 주파수 2.55 GHz에서 일반적인 링 하이브리드와 특성이 같고 3차 고조파를 포함한 12 GHz까지 -20 dB 이하의 고조파 저지 특성을 가지고 있다. 또한 링 부분의 크기는 기존 링 하이브리드의 1/4 크기로 줄어들었다. 제작된 링 하이브리드의 측정된 주파수 특성 결과는 시뮬레이션 결과와 잘 일치한다.

• 전자공학회논문지D
• /
• 제35D권2호
• /
• pp.13-18
• /
• 1998

In this paper, a new type microstrip directional coupler has been designed and a 3dB coupler has been fabricated and measured. The measured and analysed results are agree well each other except difference of 1 dB insertion loss. There are two eigenmodes, e.g. even and odd mode in coupled microstrip lines. By using the difference between these two eigenmodes phase constants, the directional coupler can be designed by adjusting coupling length, which has a desired coupler has a disdvantage that its coupling length is longer than conventional oe, but it may be used as a useful coupler in millimeter wave range. And it has the merit of less discontinuity effects, becuase it is simpler than the other couplers in structure.

• 대한전자공학회논문지
• /
• 제12권4호
• /
• pp.7-14
• /
• 1975

본 논문은 대칭 (단자 단로망이론을 근거로 분포정수 회로에 대한 매트릭스식에 의해서 결합기의 결합도와 특성임피던스간의 관계식을 얻어내었고 마이크로스트립 전송선로에 대한 칭전기학적 접근방식에 의해 등각사상법의 적용방식을 밝히고 경계치조건을 만족시키는 특성임피이던스식과 유전체 경계면상에서의 위상속도와 우수모드 및 기수모드 시의 유효유전율의 관계에 의해서 결합영역의 길이를 결정하는 식을 유도하였다. 결과식을 이용하여 원하는 방향성 결합기의 칫수를 콤퓨타 프로그램에 의하여 설계하였으며 설계한 결합기의 칫수에 따라 양면 유전체기판 Custom High K 707L-2.5을 사용하여 7개의 결합기를 제작하였다. 이 제작된 결합기는 실험에 의해서 이론치와 비교 고찰하였으며 10dB에서 20dB까지의 요구되는 결합기는 비교적 좋은 결과를 얻었다. A significant new technique in the dsvelopment of micro-wave circuits is the process of untilization of coupled lines in the transverse electro-magnetic field. The bases for this technique are the application of even-and odd-mode characteristic impedances of the transmission line. This article describes the properties of directional couplers and explains a prccfdure usrd to design micro-strip directional couplers with the aid of the computer. The article also describes the experimental results obtained from seven microstrip couplers, which were built to verify the computer program and the approximate solutions. It can be seen that in cases at X-band where couplings of 10 to 20dB are required, the computer program and approximate solutions will produce good results.

• Transactions on Electrical and Electronic Materials
• /
• 제18권2호
• /
• pp.62-65
• /
• 2017

In this paper, three DC Block designs are presented which efficiently meet the need of modern-day compactsize wireless communication systems. As one of the important parts of a complete system design, the proposed microstrip-based DC block with coupled transmission lines efficiently attenuates unwanted frequencies that cause damage to the system. The compact-sized DC block structures are created by incorporating an extended coupled-line section with a radial stub, an enveloped coupled-line section, and using alternate up-down meandering techniques. The structures are analyzed for the L-Band using a high-resistive silicon substrate. At a resonating frequency of 1.575 GHz, the designed DC Block structures have a return loss better than -10 dB, an insertion loss of around -1 dB, and also possess wide pass-band characteristics.