• The Journal of Korean Academy of Prosthodontics
• /
• v.47 no.2
• /
• pp.191-198
• /
• 2009

Statement of problem: Ceramics have been important materials for the restoration of teeth. The demands of patients for tooth-colored restorations and the availability of various dental ceramics has driven the increased use of new types of dental ceramic materials. Improved physical properties of theses materials have expanded its use even in posterior crowns and fixed partial dentures. However, ceramic still has limitation such as low loading capability. This is critical for long-span bridge, because bridge is more subject to tensile force. Purpose: The wire reinforced ceramic was designed to increase the fracture resistance of ceramic restoration. The purpose of this study was to evaluate the fracture resistance of wire reinforced ceramic. Material and methods: Heat pressed ceramic(ingot No.200 : IPS Empress 2, Ivoclar Vivadent, Liechtenstein) and Ni-Cr wire(Alfa Aesar, Johnson Matthey Company, USA) of 0.41 mm diameter were used in this study. Five groups of twelve uniform sized ceramic specimens(width 4 mm, thickness 2 mm, length 15 mm) were fabricated. Each group had different wire arrangement. Wireless ceramic was used as control group. The experimental groups were divided according to wire number and position. One, two and three strands of wires were positioned on the longitudinal axis of specimen. In another experimental group, three strands of wires positioned on the longitudinal axis and five strands of wires positioned on the transverse axis. Three-point bending test was done with universal testing machine(Z020, Zwick, Germany) to compare the flexural modulus, flexural strength, strain at fracture and fracture toughness of each group. Fractured ceramic specimens were cross-sectioned with caborundum disc and grinded with sandpaper to observe interface between ceramic and Ni-Cr wire. The interface between ceramic and Ni-Cr wire was analyzed with scanning electron microscope(JSM-6360, JEOL, Japan) under platinum coating. Results: The results obtained were as follows: 1. The average and standard deviation in flexural modulus, flexural strength and fracture toughness showed no statistical differences between control and experimental groups. However, strain was significantly increased in wire inserted ceramics(P<.001). 2. Control group showed wedge fracture aspects across specimen, while experimental groups showed cracks across specimen. 3. Scanning electron microscopic image of cross-sectioned and longitudinally-sectioned specimens showed no gap at the interface between ceramic and Ni-Cr wire. Conclusion: The results of this study showed that wire inserted ceramics have a high strain characteristic. However, wire inserted ceramics was not enough to use at posterior area of mouth in relation to flexural modulus and flexural strength. Therefore, we need further studies.

• Childhood Kidney Diseases
• /
• v.9 no.1
• /
• pp.31-37
• /
• 2005

Puruose : Thin glomerular basement membrane disease(TGBMD) is found in patients with family history of hematuria. TGBMD is autosomal dominant and is known to be one of the commonest causes of asymptomatic hematuria. This study was conducted to evaluate the histological and clinical features of patients with TGBMD. Methods : 150 cases diagnosed with TGBMD by renal biopsy while admitted in the department of pediatrics, Kyungpook National University Hospital between January 1999 and December 2003 comprised the study group. The following parameters were retrospectively anaIyzed age of onset, hematuria pattern, existence of proteinuria, process of diagnosis, laboratory findings, thickness and character of basement membrane and family history. Results : The mean age at the time of diagnosis was 7.9 years. The male to female ratio was 65:77. 94 patients or 66% visited the hospital with a chief complaint of persistent microscopic hematuria. Gross hematuria accounted for 13 cases or 9%. 78 cases(55%) were found to have hematuria for the first time from a routine school urinalysis screening. The renal biopsy showed the thickness of basement membrane to be 186$\pm$36 nm. Focal lamellation of the basement membrane was found in eight cases. In the family history, hematuria was shown in 10 cases on the Paternal side, 13 on The maternal side and none on both sides. In seven cases, hematuria was shown among siblings. No significant differences were found among the laboratory test results which were conducted at an average interval of fifteen months. Conclusion : TGBMD is one of the major causes of asymptomatic hematuria in children, which was diagnosed in increasing numbers since school urinary mass screening test started in 1998. In cases with familial progressive renal disease or focal duplication in the basement membrane Alport syndrome should be considered.

• Restorative Dentistry and Endodontics
• /
• v.31 no.3
• /
• pp.192-202
• /
• 2006

The purpose of this study was to examine the viability of PDL cells in rat molars by using in vivo MTT assay, which was used to compare fast cryopreservation group by liquid nitrogen $(-196^{\circ}C)\;with\;4^{\circ}C$ cold preservation group. A total of 74 Sprague-Dawley white female rats of 4 week-old with a body weight of 100 grams were used. The maxillary left and right, first and second molars were extracted as atraumatically as possible under ketamine anesthesia. Ten teeth of each group were divided as six experimental groups depending upon the preservation. Cryopreservation groups were Group 1 (5% DMSO 6% HES in F medium) Group 2 (10% DMSO in F medium), Group 3 (5% DMSO 6% HES in $Viaspan^(R)$). Group 4 (10% DMSO in $Viaspan^(R)$) which were cryopreserved for 1 week and cold preservation groups were Group 5 (F medium) , Group 6 ($Viaspan^(R)$) at $4^{\circ}C$ for 1 week. Immediate extraction group was used as a control. After preservation and thawing, the in vivo MTT assay was processed. Two way ANOVA and Duncan's Multiple Range Test was performed at the 95 % level of confidence, Another 2 teeth of each group were treated as the same manner and frozen sections $10{\mu}m$ thick for microscopic observation. The value of optical density obtained after in vivo MTT analysis was divided by the value of eosin staining for tissue volume standardization. Group 1, 2 had significantly higher optical density than Group 3 and 4 which had the lowest OD value. Group 6 had higher OD value than in Group 5 (P<0.05). Histological findings of periodontal ligament cell, after being stained with MTT solution were consistent with the in vivo MTT assay results. In this study, the groups which were frozen with DMSO as a cryoprotectant and the groups with F medium showed the best results.

• Korean Journal of Poultry Science
• /
• v.35 no.4
• /
• pp.341-350
• /
• 2009

The research work was carried out to study the pathogenesis covering the clinical signs, gross and histopathological lesions in different organs, and reisolation and identification of the organisms after experimental infection with the local isolate of Salmonella enterica serovar. enterica subspecies (S.) Pullorum at different time interval of the experiment during the period February 2006 to December 2006. One hundred pullets (seronegative to S. Pullorum of 12 weeks age were purchased and divided into 5 (A, B, C, D and E) groups and each group consisted of 20 birds. Four groups (A, B, C and D) were infected orally with a dose of $10^6\;CFU$, $10^7\;CFU$, $2{\times}10^7\;CFU$, $10^8\;CFU$ of S. Pullorum, respectively, and one group (E) was treated as uninfected control. The used methods were necropsy and histopathology, culture of bacteria, staining and biochemical test of Salmonella. Five birds from each group were randomly selected and sacrificed $1^{st}$ week, $2^{nd}$, $3^{rd}$ and $4^{th}$ weeks of post infection (PI). From all the groups, the bacteriological samples (crop, liver, lung, heart, spleen, bile duodenum, ceca and blood) were collected with pre enriched in buffered peptone water in sterile poly bags. Liver, lungs, heart, spleen, intestine, etc. were collected in 10% buffered-formalin for histopathological examination. No clinical signs, gross and histopathological lesions were found in control group and no S. Pullorum was reisolated. Clinical sign of experimentally infected with S. Pullorum in pullets were loss of appetite (100%), slight depression (75%), ruffled feathers (85%), diarrhea (60%) and loss of weight (100%) in chickens. The feed intake and body weight at different weeks after PI differed significantly (p<0.01) among the groups. Grossly, the highest recorded lesion was button-like ulcer in the ceca (80%) and the lowest was white nodules in lungs (1.25%). S. Pullorum were reisolated from crop (91.25%), liver (91.25%), lung (83.75%), heart (71.25%), spleen (87.75%), bile (33.25%), duodenum (92.50%), ceca (97.50%) and from different group of infection (61.25%). The highest microscopic findings were intestinal and cecal mucosa and submucosa exhibited infiltration of mononuclear cells and congestion (96.25%), and the lowest finding was nodule formation in the lungs (3.75%). The pattern of the disease production by local isolate of S. Pullorum in Bangladesh is almost similar with other isolates in different countries.

• Childhood Kidney Diseases
• /
• v.5 no.2
• /
• pp.164-175
• /
• 2001

Purpose : Alport syndrome is a hereditary nephrotic disease characterized by progressive nephrotic symptom, sensorineural hearing loss, ophthalmic abnormality, typical microscopic findings, and familial occurrence. In this study, we tried to find the risk factors related with its prognosis by taking a close observation on clinical symptoms of children with Alport syndrome reviewing retrospectively. Materials & methods : We chose children diagnosed as Alport syndrome in renal biopsy during 20 years(from 1980, Jan. until 1999, Dec.) who could receive follow up studies in tile department of pediatrics. They were divided into two groups by comparing renal function at the time of diagnosis and at current status. We compared several clinical aspects in them, and applied nonparametric test for statistical analysis. Results : The sex ratio(male:female) of 24 children was 3:1. The most common clinical symptom presented at their first visit was gross hematuria. Among those 24 children, 11 cases($46\%$) of progressing into chronic renal failure(Group II) were observed. Hypertension, proteinuria and edema were seen much frequently in group II. The level of serum protein, albumin, and creatinine clearance were decreased while BUN, creatinine were relatively increased. All the results were statistically significant. Conclusion Clinically significant risk factors related to prognosis in Alport syndrome were the presence of hypertension, edema, and proteinuria at the time of diagnosis. Also, the level of serum protein, albumin, BUN, creatinine, and glomerular filtration rate were proved to be important factors in predicting prognosis. We believe that studies on these possible risk factors would be of great help in treating and predicting prognosis of children suffering with Alport syndrome. (J Korean Soc Pediatr Nephrol 2001;5 : 164-75)

• Journal of the Korean Wood Science and Technology
• /
• v.45 no.5
• /
• pp.559-571
• /
• 2017

This study was conducted to determine the adhesive performances of plywoods affected by layering direction and the amounts of thermoplastic films. The face and back layers of veneer were hardwood species (Mixed light hardwood) and core layer veneer was radiata pine (Pinus radiata D. Don). Thermoplastic film used as adhesive were polypropylene (PP) film and polyethylene (PE) film. Thermal analysis and tensile strength were investigated on each films. As a result, the melting temperature of PP and PE films were $163.4^{\circ}C$ and $109.7^{\circ}C$, respectively, and the crystallization temperature were $98.9^{\circ}C$ and $93.6^{\circ}C$, respectively. Tensile strength and elongation of each films appeared higher on the width direction than length direction. Considering the characteristics of the thermoplastic films, the test for the amount of film used was carried out by layering film to the target thickness on veneer. The effecting of layering direction of film on plywood manufacturing was conducted by laminating in the length and width directions of the film according to the grain direction of veneer. Tensile-shear strength of plywood in wet condition was satisfied with the quality standard (0.7 MPa) of KS F 3101 when the film was used over 0.05 mm of PP film and over 0.10 mm of PE film. Tensile-shear strength of plywood after cyclic boiling exceeded the KS standard when PP film was used 0.20 mm thickness. Furthermore, higher bonding strength was observed on a plywood made with width direction of film according to grain direction of veneer than that of length direction of film. Based on microscopic analysis of the surface and bonding line of plywood, interlocking between veneers by penetration of a thermoplastic film into inner and cracks were observed.

• Journal of Korean Society of Environmental Engineers
• /
• v.28 no.8
• /
• pp.866-871
• /
• 2006

The nutrient recovery in phosphate crystallization process was investigated by using laboratory scale uptlow reactors, adopting sequencing batch type configuration. The industrial waste lime was used as potential cation source with magnesium salt($MgCl_2$) as control. The research was focused on its successful application in a novel integrated sludge treatment process, which is comprised of a high performance fermenter followed by a crystallization reactor. In the struvite precipitation test using synthetic wastewater first, which has the similar characteristics with the real fermentation effluent, the considerable nutrient removal(about 60%) in both ammonia and phosphate was observed within $0.5{\sim}1$ hr of retention time. The results also revealed that a minor amount(<5%) of ammonia stripping naturally occurred due to the alkaline(pH 9) characteristic in feed substrate. Stripping of $CO_2$ by air did not increase the struvite precipitation rate but it led to increased ammonia removal. In the second experiment using the fermentation effluent, the optimal dosage of magnesium salt for struvite precipitation was 0.86 g Mg $g^{-1}$ P, similar to the mass ratio of the struvite. The optimal dosage of waste lime was 0.3 g $L^{-1}$, resulting in 80% of $NH_4-N$ and 41% of $PO_4-P$ removal, at about 3 hrs of retention time. In the microscopic analysis, amorphous crystals were mainly observed in the settled solids with waste lime but prism-like crystals were observed with magnesium salt. Based on mass balance analysis for an integrated sludge treatment process(fermenter followed by crystallization reactor) for full-scale application(treatment capacity Q=158,880 $m^3\;d^{-1}$), nutrient recycle loading from the crystallization reactor effluent to the main liquid stream would be significantly reduced(0.13 g N and 0.19 g P per $m^3$ of wastewater, respectively). The results of the experiment reveal therefore that the reuse of waste lime, already an industrial waste, in a nutrient recovery system has various advantages such as higher economical benefits and sustainable treatment of the industrial waste.

• Economic and Environmental Geology
• /
• v.4 no.4
• /
• pp.167-215
• /
• 1971

I. Purpose and Importance of the Study The purpose of the present study is to clarify to geological, mineralogical, and physico-chemical properties of the clay minerals deposits imbedded in the Tertiary sediments in the areas between. Pohang and Ulsan along southeastern coastal region of Korea. These clays are being mined and utilized for filter and insecticide after activation or simple pulverizing, nontheless activated clays are short coming as chemical industry in Korea has been rapidly grown in recent years. In spite of such increase in clay demand, no goological investigation on clay deposits nor physico-chemical properties of the clays have been carried out up to date. Consequently activated clays produced in Korea is not only of low grade but also of shortage in supply, so that Korea has to import activated clays of better grade. The importance of the present study lies, therefore, on that guiding principle could be laid down by knowing stratigraphical horizons, of clay deposits and fundamental data of improving grade of activated clays might be derived from the results of physico-chemical examinations. II. Contents and Scope of the study The contents of the study are pinpointed down in the following two subjects: 1) General geological investigation of Tertiary formations distributed in the areas between Pohang and UIsan, and detail geological study of the bentonitic clay deposits imbedded in them. 2) To clarifty physico-chemical characteristics of the clays by means of chemical analysis, X-ray diffraction and electron microscope. The scope of the study involves the following there points: i) Regional geological investigation-This investigation has been carried out in order to find out the distribution of Tertiary sediments and exact location of clay mineral deposits in the areas between Pohang and UIsan. ii) Detail geological investigation-This has been concentrated in and around the clay deposits which. had been found out by the regional investigation. iii) Laboratory researchs include i) age determination and correlation of Tertiary sediments by paleontological study, and ii) Chemical analysis, X-ray diffraction, and electron microscopic studies on clays, samples taken from various clay deposits. III. Research Results and Suggestions 1) The geology of the area investigated is composed mainly of Janggi and Beomgokri groups of Miocene age in ascending order rested on the upper Silla system, Balkuksa granite and volcanic rocks of upper Cretaceous age as base. 2) Janggi group is composed in ascending order of Janggi conglomerate, Nultaeri rhyolitic tuff, Keumkwangdong shale, two beds of lignite-bearing formations which consist of alternation of conglomerate, sandstone and mudstone, and andesitic, rhyolitic, and basaltic tuff beds. 3) Beomgokri group is mainly composed of andesitic to rhyolitic tuff interlayered by conglomerate and tuffaceous sandstone. In the areas around boundary between North-and South Kyeongsang-do is distributed Haseori farmation which is composed of conglomerate, sandstone, mudstone and andesitic to rhyolitic tuff, and which is correlated to Eoilri formation of Janggi group. 4) Clay deposits of the area are interbedded in Eoilri, Haseori, Nultaeri tuff, Keumkwangdong shale, upper and lower horizon of the lower lignite-bearing seam, and Keumori rhyolitic tuff formations of Janggi group; and are genetically classi.fied into four categories, that is, i) those derived from volcanic ash beds(Haseori and Daeanri deposits), ii) those of secondary residual type from rhyolitic tuff beds(Seokupri deposits), iii) Clay beds above and beneath the lignite seams, (Janggi and Keumkwangdong deposits), and iv) those derived from rhyolitic tuff beds(Sangjeong and Tonghae deposits). 5) Mineral constituents of clay deposits are, according to X-ray diffraction, montmorillonite accompanied in different degree by cristobalite, plagioclase, quartz, stilbite, and halloysite in rare occasion. The clays are grouped according to mineral composition into four types; i) those consist mostly of montmorillonite, ii) those composed of montmorillonite and cristobalite, iii) those composed of montmorillonite and plagioclase, and iv) those composed of montmorillonite, plagioclase and quartz. 6) Clays interbedded in Haseori formation and vicinity of lignite seams belong to the first type, are of good quality and derived either from volcanic ash bed, or primary clay beds near lignite seams. Clays belonged to other types are derived from weathering of rhyolitic tuff formations and their quality varies depending upon original composition and degree of weathering. Few clays in secondary residual type contain small amount of halloysite. 7) Judging from analytical data, content of silica($SiO_2$) varies proportionally with content of cristobalite, and alumina($Al_2O_3$) content does not vary with that of plagioclase, but increases in the sedimentary bedded type of deposits. 8) It is unknown whether or not these days could be upgraded by beneficiation since no grain size of these impurities nor beneficiation test had been studied. 9) Clay beds derived from valcanic ash layers or sedimentary layers at the vicinity of lignite seams are thin in thickness and of small, discontinueous lenticular shape, although they are of good quality; and those derived from rhyolitic tuff formations or residual type from tuff are irregular in both occurrence and quality. It is, therefore, not only very difficult but also meaningless to calculate its reserve, and reserve estimation, even if done, will greatly be deviated from practically minable one. Consequently, way of discovery and exploitation of clay deposits in the area under consideration is to check the geologically favorable areas whenever needed.

• Journal of Chest Surgery
• /
• v.36 no.2
• /
• pp.63-72
• /
• 2003

Although a variety of synthetic vascular grafts are available in modern vascular surgery, no ideal prosthesis ha,4 yet been developed. Small-caliber vascular grafts with low flow, as used in the lower extremity, continue to become thrombosed at unacceptable rates. We have developed and evaluated the new antithrombogenic blood contacting surfaces in canine model. Material and Method: Two now antithrombogenic blood contacting surfaces(Polyvinylalcohol -Polyurethane(PVA-PU) blend and natural Graphite-polyurethane(G-PU) blend) have been developed and evaluated in canine model, using vascular grafts and patches. The luminal surfaces of the test vascular grafts(5 mm ID) were fabricated by dipping a glass rod in PVA-PU blend solution(50 % PVA) using phase separation method. Mongrel dogs of either sex weighing 18-22 kg were anesthetized by endotracheal intubation using halothane and their lungs were ventilated with a volume-cycled ventilator, Maintenance anesthesia with 0.5-1.0% halothane and supplemental oxygen was used. Two pairs were used for comparison in the bilateral femoral arteries for both vascular grafts(PVA-PU vs. PU) and vascular patches(G-PU vs. PU). Bilateral groin incisions were made and the arteries were exposed and clamped. After an excision of 1 cm of the artery between clamps, a grail of 2.5 cm in length was implanted end-to-end using 6-0 polypropylene suture. The vascular patch was implanted as a form of on-lay patch. Animals were sacrificed at 1, 2, 4, 6, 8 and 16 weeks for vascular grafts and 1, 2. 4 and 6 weeks for vascular patches. Result The vascular grafts of PVA-PU blends showed patent lumina in the 2 and 16 weeks animals, while those of PU showed a patent lumen in 2 weeks animal. PVA-PU graft of 16 weeks showed a fairly clean luminal surface. A light microscopic finding of this graft demonstrated good tissue infiltration through porosity, The animals with vascular patches showed patent arteries in both groups except 2 weeks animal. Scanning electron microscopy of the luminal surfaces of G-PU patches in 4 and 6 weeks animals showed endothelial cell covering with microvilli. PU patches showed qualitatively less endothelial cell covering. Conclusion: In conclusion, PVA-PU and G-PU blends can be a promising blood contacting surfaces for application in a synthetic vascualr graft. However, further animal study is needed to determine the real long-term effects of these methods of surface modifications.

• Radiation Oncology Journal
• /
• v.17 no.3
• /
• pp.230-237
• /
• 1999

Purpose : To elucidate the effects of pentoxifylline and diltiazem on the late response of the salivary glands of the rat after irradiation. Materials and Methods : Sixteen Sprague-Dawley rats were divided into 4 groups : (a) irradiation alone (b) irradiation with pentixifylline (PTX) (c) irradiation with diltiazem (DTZ) (d) irradiation with both PTX and DTZ. Irradiation was given in a single fraction of 16 Gy using 4 MV photon energy through an anterior port encompassing the left side of the salivary gland leaving the right side of salivary gland as a control. PTX, 20 mg/kg and/or DTZ, 50 mg/kg were infused intraperitoneally before irradiation, Two rats from each group were sacrificed on the 10th week and the rest was sacrificed on the 16th week after irradiation. Histopathologic examinations were undertaken for each section and the proportion of vacuolated cells out of the total number of cells under light microscopic fields was calculated. The statistical significance in the difference of the proportion of the vacuolated cells among the experimental groups was evaluated by a $x^2$-test. Results : Irradiated salivary glands of the 10th week group revealed markedly increased number of vacuolated cells compared to those of unirradiated control. The proportion of vacuolated cells was significantly reduced in both the PTX group (p value=0.001) and the combined PTX and DTX group compared to those of irradiation alone group. The DTZ alone group did not reveal the significant reduction of vacuolated cells compared to those of irradiation alone group (p value, >0.05). The 16th week groups revealed similar findings to those of the 10th week group, but the degree of chronic inflammatory cell infiltrates and interstitial fibrosis was increased and the number of acinar cells was reduced compared to those of the 10th week group. Conclusions : PTX significantly reduced the late radiation response of salivary glands, but DTZ did not reduce the same degree as PTX did. Taking the positive results of this study into consideration, it seems reasonable to apply PTX into the clinical trial for the head and neck irradiation to reduce the late radiation sequelae of salivary glands in the near future. At the same time the further experiment to clarify the subcellar mechni는 involved in PTX should be preceded.