• Proceedings of the Korean Society For Composite Materials Conference
• /
• 2003.10a
• /
• pp.99-102
• /
• 2003

This paper aims to observe the micro-mechanical behaviour of tow geometry during deformation of dry woven carbon-fiber fabric. With the increment of shear angle fabric experiences 'lock-up'phenomenon. In this paper, deformation of micro-mechanical parameters such as tow interval, change in tow amplitude and wavelength are investigated. To observe the micro-deformation of the fabric structure, appropriate specimens from bias extension and biaxial tests are sectioned and observed under the microscope. It was found that different loading conditions cause geometric deferences in the tow architecture.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1997.04a
• /
• pp.1073-1077
• /
• 1997

In this paper, we have studied internal quality including chemical compositions, microscopic structure and nonmetalic inclusion of test materials. We have analyzed machining characteristics including tensile strength value, impact value, hardness value etcs. Test materials are usd martensitic heat resisting steel, STR11 and STS420J2. The obtined results are as follows : 1. In analyzing internal quality, STR11 and STR420J2 have typical martensite structure and a minute needle-shaped structure. 2. Tensile strength and reduction of area and hardness value are large STR11 than STS420J2. But elongation impact are smaller STR11 than STS420J2. 3. Fracture surface of tensile speciman is ductile in STR11 and STS420J2.

• Tunnel and Underground Space
• /
• v.19 no.4
• /
• pp.318-327
• /
• 2009

Accelerated weathering tests was executed to understand the physical characteristics of rocks in Dokdo. For the tests rock samples including trachytic andestes, andesite dyke and ash tuff were taken in place. Double soxhlet extractor and peristatic pump were used for accelerating the weathering processes. After the tests for 4 months, the variations of superficial structure, microscopic structure and strength of rock samples were observed.

• Journal of the Korean Home Economics Association
• /
• v.20 no.1
• /
• pp.47-55
• /
• 1982

1. Pasts containing 10, 12.5, 15, 17.5 and 20g of butter respectively with identical contents of flor(16.25g) and egg(50g) were prepared. 2. For the five batter samples described above, following tests were conducted. a) Hardness and adhesiveness determination by texturometry b) Light microscopic observation d) Sensory Test 3. Significant differences of hardness, adhesiveness, and viscosity among the five samples were not recognized; but 1% significant difference in volumns were recognized. The best swelling was observed for the 17.5g butter sample; those of 15g and 12.5g butter samples were identical, while those of 10g and 20g showed the lowest swelling. Generally, stirring at 60~7$0^{\circ}C$ gave the best homogenity The degree of emulsification influenced the swelling. Not only large but also small amount of butter gave undestirable swelling. Sensory test for the 15g butter sample also gave best result.

• Journal of the Korean Ceramic Society
• /
• v.43 no.4 s.287
• /
• pp.247-252
• /
• 2006

Joining Yittria Stabilized Zirconia (YSZ) to NiCr metal was fabricated using YSZ/NiCr Functionally Graded Materials (FGM) Interlayer by hot pressing process. Microscopic observations demonstrate that the composition and microstructure of YSZ/NiCr FGM distribute gradually in stepwise way, eliminating the macroscopic ceramic/metal interface such as that in traditional ceramic/metal joint. The thermal characteristics of this YSZ/FGM/NiCr joint were studied by thermal shock testing and therml barrier testing. Thermal shock test was conducted by gas burner rig. Acoustic Emission (AE) monitoring was performed to analyze the microfracture behavior during the thermal shock test. It could be confirmed that FGM was the excellent performance of thermal shock/barrier resistance at above $1000^{\circ}C$.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2007.10a
• /
• pp.254-257
• /
• 2007

In this paper, anisotropic tensile properties of the AZ31B Mg-alloy sheet are obtained with the tensile test at elevated temperatures. Change of microscopic structures and the hardness is inspected after the solution heat treatment process in order to confirm the micro-structural stability of the used sheet metal. Results obtained from tensile tests show that it is very difficult to apply the conventional modeling scheme with the assumption of strain hardening to the forming analysis of the magnesium alloy sheet which shows the strain-softening behavior at the elevated temperature.

• Journal of the Korea Safety Management & Science
• /
• v.5 no.1
• /
• pp.115-128
• /
• 2003

To comparison the surface treatment methods of stone board materials, the results of Dorry's abrasive test were 23.4 for water-jet system and 18.9 for flame-burner system. Therefore abrasive hardness, the stone board materials by the water-jet system was greater than one by flame-jet system. As a result of Shore's hardness test, the stone board materials by water-jet system was twice greater than one by flame-jet system. Authors carried out microscopic observation to survey a defection of the composition minerals for two methods, but all of the both methods have not founded a defection. Therefore, the stone board materials by water-jet system was greater durability than one by flame-jet for the surface treatment methods.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.28 no.2
• /
• pp.371-377
• /
• 1999

In order to evaluate the antimicrobial function of natural herb extracts as antimicrobial agent or packaging material for the preservation of foods and greenhouse produce, the water extract of chopi (Zanthoxylum piperitum DC.) was prepared and its antimicobial activity was determined. In the paper disk test its antimicrobial activity was increased in proportion to its concentraion. The growth of microorganisms was completely inhibited above 500ppm of its concentration. It showed wide spectrum of thermal(40 to 180oC) and pH(4 to 10) stabilities. In the electronic microscopic observation(TEM and SEM) of microbial morphological change it showed to decrease the activation of physiological enzymes and to lose the function of cell membranes. Even in the activation test of galactosidase, it seemed to weaken the osmotic function of cell membranes remarkably in comparison with chloroform and its activation corresponded to 40~50% of toluene. Zanthoxylum piperitum DC. extract seemed to be an excellent antimicrobial for the inhibition of food borne microorganisms as well as the pre servation of greenhouse produces.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 1996.03a
• /
• pp.143-148
• /
• 1996

In this paper, we have studied internal quality including chemical compositions, microscopic structure and nonmetalic inclusion of test materials. We have analyzed dynamic characteristics of cutting force of milling including tensile strength value hardness etcs. Test materials are used the tempered carbon steel and the non-tempered carbon steel. The obtained results are as follows: 1.In analyzing internal quality, the tempered carbon steel have typical martensite structure and the non-tempered carbon steel have ferrite+pearlite structure. 2.Yield strength, tensile strength and hardness value are in the non-tempered carbon steel but elongation is maximum value in the tempered carbon steel. 3.Cutting force is smaller non-tempered carbon steel than tempered carbon steel when feed speed and depth of cut is constant. 4.Cutting force is smaller to the tempered carbon steel and smaller non-tempered carbon steel than tempered carbon steel when cutting conditions

• Korean Journal of Veterinary Service
• /
• v.44 no.2
• /
• pp.113-117
• /
• 2021

Cocklebur poisoning in livestock can cause sudden death, with clinical signs include depression, inappetite, blindness, reluctance to move, hypersensitivity, ataxia and coma. The cause of cocklebur poisoning is ingestion of cocklebur sprout or seed, which contains carboxyatractyloside. In December 2020, a 47 month-old Hanwoo suddenly developed ataxia, and died after several hours. Hay mixed cocklebur seeds was fed to Hanwoo for 4 days before the symptoms. At autopsy, petechia and ecchymosis were seen on serous membrane of rumen and intestines. Peritoneal cavities contained a yellowish fluid and, hypoglycemia (Glu <20 mg/dL) was measured in blood test result. Microscopic lesions were karyolysis of centriloular hepatocyte and hemorrhage. Based on autopsy, blood and histopathological test, we diagnosed this case as cocklebur poisoning in Hanwoo.