• The Journal of the Acoustical Society of Korea
• /
• 제15권2E호
• /
• pp.60-68
• /
• 1996

In this paper, we implement the door lock system based on pattern matching technique for speaker recognition using DTW. In this study, major features of our system are summarized as follows:(1) Make the average reference pattern using DTW. This method keeps the high recognition rate compared with the other systems whose performances degrade rapidly as time goes on. (2) Use F-ratio values of the cepstral coefficients. We find that the weighted cepstral reveals an effect on intensifying the difference between th customer and the imposter. The system hardware is composed of two parts : the door lock part and the speaker recognition processing part. We use an 8051 microprocessor in the door lock park for serial communication with host processor to open or close the lock. Using our system, we obtain speaker recognition rate of about 99.5%.

• 한국조명전기설비학회:학술대회논문집
• /
• 한국조명전기설비학회 2007년도 추계학술대회 논문집
• /
• pp.65-70
• /
• 2007

고연색성의 실시간으로 색온도 제어 가능한 승강기용 조명 제품 개발을 위하여 4계절 별 일 중 주광의 색온도 변화를 계산하였다. 4계절 별 일 중의 색온도 변화는 대한민국 서울의 위치를 기준으로 태양광 직사조도, 청공광조도 등을 계산하고 지면조도와 색온도의 관계로부터 춘분, 하지, 추분, 동지의 일 중 색온도 변화를 계산하였다. 이 값들을 색온도 제어회로의 Microprocessor에 이식함으로 4계절 별로 실시간으로 색온도가 변화하는 승강기용 조명기구를 개발하였다. 또한 개발 시제품의 전기적, 광학적 성능 측정 결과 각각의 개발 목표 항목을 만족시켰다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1991년도 추계학술대회 논문집 학회본부
• /
• pp.353-356
• /
• 1991

This paper proposes a robust direct adaptive control system implementation using a 80286 microprocessor-based system for controlling the speed of a DC servo motor. In this paper, assuming that the unmodeled dynamics of the plant are sufficiently small in the low-frequency range, the plant as linear time-invariant system is the second relative degree, we construct the direct adaptive control system with the algorithm considering plant unmodeled dynamics and execute the experiment, and compare the characteristics with those of PI algorithm's. It shows that an easy implementation of the built controller is due to the usage of software for the algorithm.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2004년도 학술대회 논문집 정보 및 제어부문
• /
• pp.690-692
• /
• 2004

Differently from an existing analog control, because the digital control includes microprocessor basically, the digital control is enable to monitor internal parameters of DC-DC converter and to control output voltage remotely by communicating with a Windows based PC and also to monitor whether exact voltage is output or not. These things are impossible in an analog control. In this paper, a simple flyback converter is taken as a control target and is controlled by a microcontroller(TMS320F2812). This converter can make variable outputs 1.8V to 5V from 30V input voltage remotely in PC. Finally the response characteristics of a step reference voltage and in a steady state are experimented to verify the feasibility and the usefulness of this digital controlled converter.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1996년도 하계학술대회 논문집 A
• /
• pp.638-640
• /
• 1996

This paper presents microprocessor-based Digital Position Detection Unit using the inductive radio line and the antennas in train signaling system. This comprises the Fail-Safe system due to the dual controlled system to drive with safe-side even in events of faults, and designs the FSC(failure safe comparator). And the method of Markov Modeling is described for the reliability evaluation of system.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1996년도 하계학술대회 논문집 A
• /
• pp.409-411
• /
• 1996

The purpose of this paper is construction of PMS with extension of consuming time of battery in the special vehicle system using exact Battery state of charge measurement algorithm. It is possible to use long distance control by RS-485, fast data processing VMEbus. Its computer simulation, experimental tests and application to special vehicle are described.

• International Journal of Ocean System Engineering
• /
• 제2권4호
• /
• pp.223-232
• /
• 2012

For the accurate estimation of the position and orientation of a UUV (unmanned underwater vehicle), a low-cost AHRS (attitude heading reference system) was developed using a low-cost IMU (inertial measurement unit) sensor which provides information on the 3D acceleration, 3D turning rate and 3D earth-magnetic field data in the object coordinate system. The main hardware system is composed of an IMU sensor (ADIS16405) and TMS320F28335, which is coded with an extended kalman filter algorithm with a 50-Hz sampling frequency. Through an experimental gimbal device, good estimation performance for the pitch, roll, and yaw angles of the developed AHRS was verified by comparing to those of a commercial AHRS called the MTi system. The experimental results are here presented and analyzed.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2005년도 춘계학술대회
• /
• pp.160-163
• /
• 2005

This paper proposes a simple MPPT control scheme of a Current-Control-Loop Error system Based that can be obtains a lot of advantage to compare with another digital control method, P&O and IncCond algorithm, that is applied mostly a PV system. An existent method is needed an expensive processor such as DSP that calculated to change the measure power of a using current and voltage sensor at the once. Therefore, it is applied a small home power generation system that required many expenses. But, a proposed method is easy to solve the cost reduction and power unbalance problems that it is used by control scheme to limit error of a current control of common sensor. This proposed algorithm had verified through a simulation and an experiment on battery charger using PIC that is the microprocessor of a low price.

• 한국원자력학회:학술대회논문집
• /
• 한국원자력학회 1996년도 춘계학술발표회논문집(2)
• /
• pp.725-730
• /
• 1996

In this work, the software behavior under memory faults in operation phase is modeled and simulated using the stochastic activity network, generalized stochastic Petri nets. This networks permit the representation of concurrency, timeliness, fault tolerance, and degradable performance of system and provide a means for determining the stochastic behavior of a complex system. We estimate the reliability of an application software in the digitized system in nuclear power plants and show the sensitivity of the software reliability to the major physical parameters which affect the software failure in normal operation phase. We found that the effects of the hardware faults on the software failure should be considered for predicting the software dependability accurately in operation phase.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2005년도 제17회 워크샵 및 추계학술대회
• /
• pp.680-683
• /
• 2005

This paper proposes a simple MPPT control scheme of a Current-Control-Loop Error system Based that can be obtains a lot of advantage to compare with another digital control method, P&O and IncCond algorithm that is applied mostly a PV system. An existent method is needed an expensive processor such as DSP that calculated to change the measure power of a using current and voltage sensor at the once. Therefore, it is applied a small home power generation system that required many expenses. But, a proposed method is easy to solve the cost reduction and power unbalance problems that it is used by control scheme to limit error of a current control of common sensor. This proposed algorithm had verified through a simulation and an experiment on battery charger using PIC that is the microprocessor of a low price.