• Journal of Navigation and Port Research
• /
• v.28 no.2
• /
• pp.135-140
• /
• 2004

A purpose of developing a sound source tracking system in this paper is to reduce the noise efficiently from the received signal by microphone array and measure the signal's time delay between the microphones. I have applied the wavelet analysis algorithm to the system and calculated the sound source's relative position For the performance evaluation, I have compared with the results of utilizing the digital filtering methods based on the FIR LPF using Kaiser window function and the inverse Chebyshev IIR LPF. As a result, I have confirmed the fact that 'time-scale' filter using inverse discrete wavelet transform was suitable for this system.

• The Journal of the Acoustical Society of Korea
• /
• v.30 no.3
• /
• pp.115-122
• /
• 2011

In this paper, we present a method to estimate an accurate real-time sound source direction based on time delay of arrival by using generalized cross correlation with four cross-type microphones. In general, existing systems have two disadvantages such as system embedding limitation due to the necessity of data acquisition for signal processing from microphone input, and real-time processing difficulty because of the increased number of channels for sound direction estimation using DSP processors. To cope with these disadvantages, the system considered in this paper proposes hardware design for enhanced real-time processing using microphone array signal processing. An accurate direction estimation and its design time reduction is achieved by means of an efficient hardware design using spatial segmentation methods and verification techniques. Finally we develop a system which can be used for embedded systems using a sound codec and an FPGA chip. According to experimental results, the system gives much faster real-time processing time compared with either PC-based systems or the case with DSP processors.

• The Journal of Engineering Research
• /
• v.8 no.1
• /
• pp.59-65
• /
• 2006

본 논문에서는 마이크로폰 어레이 시스템을 이용하여 여러 화자의 음성 정보로부터 각 화자가 위치한 방향을 추정하는 기술 개발 내용을 다룬다. 성능 향상을 위한 전처리 과정으로 비선형 증폭기를 사용하여 거리에 따른 영향을 최소화하는 과정과 잡음에 대한 강인성을 얻기 위해 음성활성 영역을 검출하는 과정을 포함한다. 등간격으로 배치된 마이크로폰 어레이 시스템의 기하학적 특성에 따른 음원의 위치와 신호의 지연시간차이와의 상관관계로부터 화자의 위치를 역으로 추정하는 알고리즘을 기본으로 하여 가능성 척도를 계산하고 이를 활용하여 가능성이 높은 것들을 클러스터링하여 가능성이 있는 후보를 선정하여 화자의 방향을 검지한다. 이 과정에서 오인식을 최소화하기 위하여 가능성이 희박한 영역에 대한 추정 억제 방법으로 부정식 추론법을 적용하였다. 2 화자의 음성 신호를 입력으로 한 실험을 통하여 제안한 방법에 의한 다화자 방향검지의 가능성을 알아보았다.

• Journal of Advanced Navigation Technology
• /
• v.24 no.5
• /
• pp.393-407
• /
• 2020

In order to reduce the threat by illegal unmanned aerial vehicles, a tracking system based on sound was implemented. There are three main points to the drone acoustic tracking method. First, it scans the space through variable beam formation to find a sound source and records the sound using a microphone array. Second, it classifies it into a hidden Markov model (HMM) to find out whether the sound source exists or not, and finally, the sound source is In the case of a drone, a sound source recorded and stored as a tracking reference signal based on an adaptive beam pattern is used. The simulation was performed in both the ideal condition without background noise and interference sound and the non-ideal condition with background noise and interference sound, and evaluated the tracking performance of illegal drones. The drone tracking system designed the criteria for determining the presence or absence of a drone according to the improvement of the search distance performance according to the microphone array performance and the degree of sound pattern matching, and reflected in the design of the speech reading circuit.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2013.04a
• /
• pp.149-150
• /
• 2013

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2006.11a
• /
• pp.763-766
• /
• 2006

The principal of a Maglev train is that floats on a magnetic field and is propelled by a linear induction motor. One of advantages is that it generates less noise compared to the wheel-on-rail train, because there are no wheels running along the rail. However, noises due to aero-dynamic disturbance and electrical system such as VVVF inverter and SLIM still occur. In this study, the Maglev cabin noises are measured during running and zero speed conditions. Pass-by noise measurements are performed to obtain outside noise during the operation of the train on the test tract. Data include a single microphone measurement as well as microphone array measurements. The array data are useful for sound source localization and more detailed noise reduction planning.

• Proceedings of the IEEK Conference
• /
• 2006.06a
• /
• pp.363-364
• /
• 2006

The direction of arrival of the sound signal can be derived from the time differences at the microphone array and the motor controls the camera to point at the direction of the sound signal. You can get through to the homepage and confirm the camera image on a client computer which connects to the server computer through Internet.

• Proceedings of the IEEK Conference
• /
• 2006.06a
• /
• pp.341-342
• /
• 2006

The direction of arrival of the sound signal can be derived from the time differences at the microphone array and the motor controls the camera to point at the direction of the sound signal. You can get through to the homepage and confirm the camera image on a client computer which connects to the server computer through Internet.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2005.05a
• /
• pp.158-163
• /
• 2005

In this paper the aeroacoustic characteristics of a tilt-rotor system is measured by using a sealed model tilt-rotor. With a microphone array system and the do-dopplerization algorithm, the location and the characteristics of rotor noise are successfully measured. The most of high frequency noise (4kHz) is found to be located at rotor blade tips, but the low frequency tonal noise is dominant on the middle of the rotor blades. The measured tonal noise characteristics are compared to the results of theoretical calculation. At 0.5m distance from the rotor plane, measured and calculated data are relatively well matched regardless of rotating speed and collective pitch angie for the azimuthal angles between $0^{\circ}\;and\;60^{\circ}$. However, the data on the azimuthal angles between $70^{\circ}\;and\;90^{\circ}$ are not quite comparable. In addition, the compared data for far-field case (1.5m) are quite different. This is probably due to the unsteady effect which if not included in the theoretical calculation.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.51 no.10
• /
• pp.256-263
• /
• 2014

We have designed and made three kinds of FBG(Fiber Bragg Grating) Acoustic Transducer using Hopper type WDM on the use of recently developed FBG in Korea. The newly designed three kinds of FBG Acoustic Transducer using Hopper type WDM have an excellent merit of practical use with simple structure of sensors arm as well as the merit with existing fiber sensors. It was possible to detect sound waves in the range of 10 Hz to 18 kHz through the newly designed three kinds of FBG Acoustic Transducer and also, possible to detect its signal within the maximum range of 8.6 m by the use of most suitable resonance condition of the transducer. Especially, we can expect the utilization of low-frequency signal detection instead of existing acoustic sensor in the environment of electric noise and inferior condition. Furthermore, they can be developed as the high-sensibility and multi-point signal detection system through the sensor array system.