• 소성∙가공
• /
• 제8권3호
• /
• pp.289-289
• /
• 1999

This paper describes the investment casting of TiAl alloys. The effects of mold material and mold preheating temperature for the investment casting of TiAl on metal-mold interfacial reaction were investigated by means of optical micrography, hardness profiles and an electron probe microanalyzer. The mold materials examined were colloidal silica bonded ZrO₂, ZrSiO₄, A1₂O₃and CaO stabilized ZrO₂. When compared with conventional titanium a1loy, the high aluminum concentration of TiAl alloys helps to lower their reactivity in the molten state. The A1₂O₃mold is a promising mold material for the investment casting of TiAl in terms of the thermal stability, formability and cost. Special attention need to be paid to thermal stability and mold preheating when developing the investment calling of TiAl alloys.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2001년도 제17회 학술발표회 논문초록집
• /
• pp.90-93
• /
• 2001

In the present work, ultrasonic testing method has been developed to evaluate adhesive layers in rocket motor case assembly for the reliability of the rocket. The main objective of the present work was to find debonding between steel and rubber layers. The relationship between adhesion ratio and reflected ultrasonic amplitude was calculated by considering reflection coefficient at the interface between steel and rubber layers. It was found that the higher amplitude of ultrasound is reflected for the debonding area, and shown good agreements with experimental results. The ultrasonic C-scan images offers good implements for the determination of debonding area. The nondestructive testing results were compared with the micrography of destruective testing. As results, ultrasonic testing could be utilized for the evaluation of adhesive layer in the rocket motor case assembly.

• 미생물학회지
• /
• 제3권2호
• /
• pp.1-8
• /
• 1965

The potato viruses, as possible potato virus X(PVX), potato virus Y(PVY), potato virus S(PVS) are isolated from potato tuber, which collected from eleven areas (Table 1) in Korea. These viruses are isolated by single lesion isolation, Aphid transmission and inoculating methods through the many species of the different plants. The PVX is identified by host range, symptoms, physical properties, serological reaction and electron micrography. The other two viruses are identified by the first two methods mentioned above. The results of the above experiments are as follows. The total value of these viruses infection is 81%. The value of PVX infection is higher than the other two viruses. The properties of PVX are marked as local lesions on Comphrena globosa. The dilution end point is $10^{-6}$, the thermal inactivation point is $70^{\circ}C$ and the size of virus particles is around 13 x 60 $m\mu$.

• 한국표면공학회지
• /
• 제29권5호
• /
• pp.585-592
• /
• 1996

In order to investigate the influence of gas pressure in PVD deposition conditions, aluminum films were prepared by vacuum evaporation and ion plating. The crystal orientation and morphology of the films affected by argon gas pressures were characterized by using X-ray diffraction (XRD) and scanning electron micrography (SEM) respectively. With the increasing of argon gas pressure, the preferred orientation of aluminum films exhibited (200) and the diffraction peaks of the films became less sharp and broadened. Film's morphology changed from columnar structure to granular structure with the increase of gas pressure. And the properties of these films on corrosion behaviors were estimated by measuring anodic polarization curves in deaerated 3% NaCl solution. The aluminum films which exhibited granular structure with (200) preferred orientation showed good corrosion resistance.

• 열처리공학회지
• /
• 제4권2호
• /
• pp.1-8
• /
• 1991

The spheroidization of cold rolled lamellar pearlite in annealing at the temperatures between 600 and $700^{\circ}C$ has been studied by quantitative micrography. It was foud that the spheroidization proceeded as two stageh. The first stage was the stage of relieving the stored energy by cold work, the second was the stage of reducing the interface energy between ferrite and cementite. The spheroidization rate combining the spheroidization rate of each stages is described by the following equation : $$d(1/S)/dt=k_3{\cdot}D/_{(1/s)}\{{\sigma}V/_{(1/s)}+k_4{\cdot}{\exp}(-bt)\}$$ Where, S is the total area of the interface between ferrite and cementite per unit volume, D is the diffusion coefficient, ${\sigma}$ is the boundary energy, V is the volume fraction of the cementite, and $k_3$, $k_4$, b are constants.

• Advances in materials Research
• /
• 제2권1호
• /
• pp.15-36
• /
• 2013

Incorporation of polar functional moieties into polyethylene (PE) film has been achieved by graft copolymerization of polar monomers such as methacrylic acid (MAAc) and acrylamide (AAm) on to PE film, preirradiated with ${\gamma}$-rays from $^{60}Co$ source, using benzoyl peroxide (BPO) as initiator in aqueous medium. Percentage of grafting of MAAc and AAm was determined as a function of irradiation dose, monomer and initiator concentration, temperature, reaction time and amount of water. Maximum percentage of grafting of MAAc (1453%) and AAm (21.28%) was obtained at [MAAc] = $235.3{\times}10^{-2}$ mol/L, [AAm] = $23.4{\times}10^{-2}$ mol/L, [BPO] = $5.5{\times}10^{-2}$ mol/L and $16.5{\times}10^{-2}$ mol/L at $80^{\circ}C$, $90^{\circ}C$ in 180 min and 90 min respectively. The grafted PE films were characterized by FTIR, Thermogravimetric analysis (TGA) Scanning Electron Micrography (SEM) and X-ray diffraction methods. Some selective properties of grafted films such as swelling behavior, ion and metal uptake have been carried out. The biodegradation studies of the grafted PE films have also been investigated. The grafted films developed superior swelling behavior with maximum swelling (480%) in water as compared to pristine PE (13.55%), better thermal stability and ion and metal uptake studies showed promising results that can be effectively used for desalination of brackish water and separation of metals from the industrial effluents.

• 한국세라믹학회지
• /
• 제19권4호
• /
• pp.293-299
• /
• 1982

The effects of $MnO_2$ and $Cr_2O_3$ on the Piezoelectrictric properties of Pb(Mg1/2W1/2)0.3 Ti0.4 Zr0.3O3 Ceramics. Electromechanical properties in the system in connection with the sintering temperature and the effects of $MnO_2$ and $Cr_2O_3$ addition. The dielectric constant of the ceramics decreased with the additions of $MnO_2$ while the additions of $Cr_2O_3$ increased the value. The Planar coupling factor (Kp) of the ceramics with 0.2wt% $MnO_2$ and with 0.2wt% $Cr_2O_3$ gave the highest value of 0.52 and 0.513 as sintered at 106$0^{\circ}C$, 108$0^{\circ}C$, respectively. The value of mechanical Q-factor were in parallel with the fired density of the ceramics. The optical micrography of the sintered bodies showed that the additions of $MnO_2$ promoted the grain growth, while the additions of $Cr_2O_3$ retarded the grain growth.

• The Korean Journal of Ecology
• /
• 제6권4호
• /
• pp.21-28
• /
• 1983

The relationship of Paramecium bursaria with its symbiiotic Chlorella was studied in the view-point of photosynthesis and its product movement. The following results were obtained. In 1/10 dilution of bacterized medium green Paramecium grew and survived better than colorless Paramecium. P. bursaria was competitively related to its symbiotic algae as far as the change of total chlorophyll contents was concerned. Therefore, in continuous darkness total chlorophyll contents of green Paramecia decreased proportionally to the time course. Under the condition, on the other hand, that the bacterized medium was not replenished over 10 days, total chlorophyll contents in P. bursaria increased by over 2 times as much as those in normal condition. By means of Oxygen Diometer it was assured that green Paramecium was able to utilize thoitic the great part of oxygen evolved photosynthetically by its symbiotic algae. Also when was given many starch grains were found in symbiotic chlorella through electron micrography. These data suggested that P. bursaria was photosynthetically given lots of benifit by its symbiotic chlorella.

• Journal of Advanced Marine Engineering and Technology
• /
• 제18권2호
• /
• pp.54-63
• /
• 1994

Mg thin films were prepared on SPCC(cold-rolled steel) substrates by vasuum evapoaration and ion-plating. The influence of argon gas pressure and substrates bias voltage on the crystal orientation and morphology of the film was determined by using X-ray diffraction and scanning electron micrography (SEM), respectively. And the effect of crystal orientation and morphology of the Mg thin films on corrosion behavior was estimated by measuring the anodic polarization curves in deaerated 3% NaCl solution. The crystal orientation of the Mg films deposited at high argon gas pressure exhibited a (002) preferred orientation, regardless of the substrate bias voltage. Film morphology changed from a columnar to a granular structure with the increase of argon gas pressure. The morphology of the films depended not only on argon gas pressure but also bias voltage ; i.e., the effect of increasing bias voltage was similar to that of decreasing argon gas pressure. The influences of argon gas pressure and bias voltage were explained by applying the adsorption inhibitor theory and the sputter theory. And also, this showed that the corrosion resistance of the Mg thin films can be changed by controlling the crystal orientaton and morphology.

• 한국토양비료학회지
• /
• 제20권4호
• /
• pp.309-314
• /
• 1987

화력발전소(火力發電所)에서 부생(副生)되는 Fly ash의 비료자원(肥料資源) 가능성(可能性)을 검토(檢討)하기 위해 국내산(國內産) 무연탄(無煙炭) 및 도입(導入) 유연탄(有煙炭)의 회(灰)에 대한 광물학적(鑛物學的) 특성(特性)을 분석(分析)하였다. Fly ash는 규소(珪素), 알미늄이 주성분(主成分)으로서 전형적(典型的)인 규산(珪酸)알미늄 광물(鑛物)의 특성(特性)을 지니고 있었다. 그러나 비료자원(肥料資源)으로서 규소(珪素) 및 가리(加里)는 식물(植物)에 쉽게 이용(利用)될 수 없는 성분(成分)이었다. X-선회석분석(線回析分析), 시차열분석(示差熱分析), 적외선분광분석(赤外線分光分析) 및 Scanning Electron Micrography 분석(分析)에 의하여 새로운 광물(鑛物)인 Mullite의 형성(形成)을 확인(確認)하였으며 괴상(塊狀)의 규산물질(珪酸物質)이 생성(生成)되었다.