• 제목/요약/키워드: Microfiltration Membrane

검색결과 308건 처리시간 0.026초

염료의 탈염/정제/농축처리용 분리막의 제조 및 특성평가 (Preparation and Properties of Membranes for the Application of Desalting, Refining and Concentrating for Dye Processing)

  • 남상용;장재영;정연석;이영무
    • 멤브레인
    • /
    • 제16권3호
    • /
    • pp.213-220
    • /
    • 2006
  • 본 연구에서는 정밀여과 및 나노여과 분리막 시스템을 활용하여 염료 제조 시 필요한 탈염/정제/농축처리 기술을 개발하고 그에 따른 염료의 품질과 품질의 안정성을 향상시키며, 기존공정의 단수를 축소하여 생산성 향상, 인력저감 및 원재료의 비용을 감소하고자 하였다. 염료의 탈염/정제/농축처리시 염료의 다양한 농도에 적합한 분리막의 제조 및 가압식 막 element를 제작하고, 가압식 분리막 시스템에 맞는 막 모듈의 설계와 pilot-scale 시스템을 통해 염료의 처리수질 분석 및 운전인자를 도출하였다.

THE EFFECT OF AIR BUBBLES FROM DISSOLVED GASES ON THE MEMBRANE FOULING IN THE HOLLOW FIBER SUBMERGED MEMBRANE BIO-REACTOR (SMBR)

  • Jang, Nam-Jung;Yeo, Young-Hyun;Hwang, Moon-Hyun;Vigneswaran, Saravanamuthu;Cho, Jae-Weon;Kim, In S.
    • Environmental Engineering Research
    • /
    • 제11권2호
    • /
    • pp.91-98
    • /
    • 2006
  • There is a possibility of the production of the air bubbles in membrane pores due to the reduction in pressure during membrane filtration. The effect of fine air bubbles from dissolved gases on microfiltration was investigated in the submerged membrane bio-reactor (SMBR). The $R_{air}$ (air bubble resistance) was defined as the filtration resistance due to the air bubbles formed from the gasification of dissolved gases. From the results of filtration tests using pure water with changes in the dissolved oxygen concentration, the air bubbles from dissolved gases were confirmed to act as a foulant and; thus, increase the filtration resistance. The standard pore blocking and cake filtration models, SPBM and CFM, respectively, were applied to investigate the mechanism of air bubble fouling on a hollow fiber membrane. However, the application of the SPBM and CFM were limited in explaining the mechanism due to the properties of air bubble. With a simple comparison of the different filtration resistances, the $R_{air}$ portion was below 1% of the total filtration resistance during sludge filtration. Therefore, the air bubbles from dissolved gases would only be a minor foulant in the SMBR. However, under the conditions of a high gasification rate from dissolved gases, the effect of air bubble fouling should be considered in microfiltration.

염색폐수의 처리를 위한 세라믹 분리막에 대한 고찰 (A Review on Ceramic Based Membranes for Textile Wastewater Treatment)

  • 곽연수;라즈쿠마 파텔
    • 멤브레인
    • /
    • 제32권2호
    • /
    • pp.100-108
    • /
    • 2022
  • 다양한 산업 중에서 섬유 산업은 섬유 염색을 위해 가장 많은 양의 물을 사용하는데, 이는 여러 종류의 염료를 포함한 폐수의 방대한 배출로 이어진다. 염료의 제거를 위한 방법에는 오존 처리, 흡착 등의 다양한 처리 방법이 존재한다. 하지만 이러한 처리 방법은 폐수 재사용의 문제로 인해 처리 가격이 상승하기 때문에 성공적이지 못하다. 이에 대한 대안으로 막분리 공정이 폐수의 염료 처리를 위한 가장 적절한 기술로 보고되고 있다. 이때 사용되는 분리막은 고분자 분리막과 세라믹 분리막으로 나눌 수 있다. 세라믹 분리막의 장점에는 세척의 용이함, 긴 수명, 내열성, 내화학성, 그리고 기계적 안정성이 있다. 세라믹 분리막은 다양한 원료로 만들 수 있으며, 점토, 제올라이트, 플라이 애시와 같은 천연 재료는 저렴하고 구하기 용이하다. 본 리뷰에서 폐수처리는 크게 한외여과(ultrafiltration), 정밀여과(microfiltration), 그리고 나노여과(nanofiltration) 세가지 공정으로 나누어져 있다.

AHP를 이용한 폐수정화공정의 막기술 선정에 관한 연구 (An Application of the Analytic Hierarchy Process to the Selection of the Membrane Systems of Waste Water Treatment)

  • 홍순욱;김강민;김태현;조근태
    • 산업공학
    • /
    • 제12권4호
    • /
    • pp.602-616
    • /
    • 1999
  • Recently, due to the primary emphasis of environmental problem, the proper selection of the membrane systems necessary for waste water treatment has been one of the critical issues in the industrial sector. This paper shows how an Analytic Hierarchy Process (AHP) model can be used for assessing the performance of selected membrane systems: ultrafiltration, microfiltration, reverse osmosis, and electrodialysis essential for waste water treatments. The final results show that ultrafiltration is the most attractive membrane system to use in a water recycling system, followed by microfiltration, reverse osmosis and electrodialysis. This is consistent with the information that we found with respect to the elements that were taken into consideration. Sensitivity analysis is also provided here.

  • PDF

막분리 공정을 이용한 과산화수소 함유 폐액처리용 카탈라제 생산 (Catalase Production by Membrane Process for Treatment of Industrial Wastewater Containing Hydrogen Peroxide)

  • 허병옥;이동철;신현재
    • KSBB Journal
    • /
    • 제18권3호
    • /
    • pp.186-189
    • /
    • 2003
  • 본 연구는 Aspergillus niger 폐포자를 이용하여 과산화수소를 함유한 폐액처리용 효소제조 공정개발에 그 목표가 있다. 본 카탈라제 (catalase) 생산 공정은 미세여과(0.2 $\mu\textrm{m}$ microfiltration)와 한외여과 (300 KDa, 50 KDa, ultrafiltration)의 순차적인 막 여과 방식을 통하여 효소액을 회수하는 것을 특징으로 한다. 초기 폐포자와 완충액의 희석비는 1 : 5였으며 막분리 공정의 수율은 90% 이상이었다. 얻어진 카탈라제 용액의 최적 온도는 4$0^{\circ}C$, 최적 PH는 5-8 영역이었다.

정밀여과에서 불균일 입자에 의한 막오염에 관한 3차원 모사 연구 (Three Dimensional Simulation of the Deposition of Multi-dispersed Particles during Cross-flow Microfiltration)

  • 윤성훈;이정학;김규진
    • 한국막학회:학술대회논문집
    • /
    • 한국막학회 1997년도 춘계 총회 및 학술발표회
    • /
    • pp.48-49
    • /
    • 1997
  • 막분리에 있어 막오염 현상은 공정의 경제성을 좌우하는 중요한 요소이다. 이에따라 막오염에 따른 플럭스 변화를 예측하기 위한 다양한 방법을 시도하고 있다. 그러나 대부분의 동력학적 해석식들은 여과초기에만 적용되는 단점이 있었다. 최근에는 콜로이드 입자에 의한 막오염 과정을 그대로 모사하여 여과개시 후 상당한 시간 후의 플럭스를 예측하려는 시도를 하고 있다. 그러나 지금까지 연구된 모델들은 2차원입자를 사용하거나 혹은 단일입자분포를 갖는 3차원입자를 사용한 것들이었다. 2차원 모사인 경우 세공막힘현상을 설명할 수 없으며 3차원 단일분포 입자시스템은 현실과는 거리가 먼 단점이 있었다. 이에따라 본 연구에서는 다중분포(multi-disperse)를 갖는 입자의 정밀여과 (microfiltration)를 모사하여 시간에 따른 플럭스의 변화를 예측해 보고자 하였다.

  • PDF

Fouling control in a woven fibre microfiltration membrane for water treatment

  • Chollom, Martha Noro;Rathilal, Sudesh;Pikwa, Kumnandi;Pillay, Lingham
    • Environmental Engineering Research
    • /
    • 제24권3호
    • /
    • pp.418-426
    • /
    • 2019
  • Current available commercial membranes are not robust and are therefore destroyed if left to dry out or handled roughly. Woven fibre microfiltration (WFMF) membranes have advantages over its competitors with respect to durability, thus, favourable for the developing economies and operation during rough conditions. Evaluation of the effects of aeration and brushing as a flux enhancement strategies for WFMF membrane was the purpose of this study. The WFMF membrane was found to be susceptible to pore plugging by colloidal material and adsorption/attachment by microbiological contaminants. This led to a 50% loss in flux. Aeration as a single flux enhancement strategy proved insufficient to maintain high flux successfully. Therefore combined flux enhancement strategies yielded the best results.