• 임산에너지
• /
• 제18권1호
• /
• pp.1-5
• /
• 1999

잦나무 조림목의 유용한 이용과 적합한 용도개발을 위한 수간내 재질변동을 조사하였다. 수고방향(수고 약 20m중 0.3, 1.3, 2.3, 5.3m부위)의 가도관장, 가도관폭, 마이크로피크릴경사각, 압축강도를 측정하고, 그들의 변동에 관하여 Duncan의 다중검정법에 의하여 조사하였다. 그 결과 가도관장, 가도관폭 및 압축강도는 대체로 유의차를 보이지 않았으나 마이크로피브릴경각은 유의차를 나타냈다. 그러나 마이크로피브릴경각은 수고에 따라 높아지거나 또는 낮아지는 등 일정한 경향을 보이지는 않았다.

• Journal of the Korean Wood Science and Technology
• /
• 제26권2호
• /
• pp.45-50
• /
• 1998

Tracheid length, microfibril angle, and compression strength were examined in south and north sides of Pinus koraiensis. The sample tree was 57 years old and had been planted in central Korea. Tracheid length on the south side of the tree ranged from 2.87 to 3.40mm and on the north ranged from 3.60 to 3.53mm and mean values were 3.15 mm for the south and 3.26mm for the north. Tracheid length was 0.11 mm longer on the north side than on the south. Microfibril angle on the south side ranged from $12.6^{\circ}$ to $20.3^{\circ}$ and that on the north from $6.8^{\circ}$ to $13.5^{\circ}$; mean values were $16.6^{\circ}$ on the south side and $9.6^{\circ}$ on the north. Microfibril angle was $7.0^{\circ}$ greater on the south side than on the north side. For compression strength on the south and north sides, significant difference at the 95% level was found only at l.3m above the ground level of the sample tree; for compression limit stress, significant difference at this level was found at 1.3 and 5.3m above the ground level. However, compression strength and compression limit stress were greater on the north side than on the south side.

• Journal of the Korean Wood Science and Technology
• /
• 제33권1호통권129호
• /
• pp.21-28
• /
• 2005

중부 지방의 조림지에서 생육된 30년생의 일본잎갈나무(낙엽송)에 대하여 지상고별로 원반을 채취해 수를 중심으로 남측과 북측 부위의 조재 및 만재에 대해 가도관 길이와 폭, 마이크로피브릴 경각 및 압축, 휨, 충격 강도를 조사했다. 가도관의 길이와 폭에 있어 남측과 북측간에는 측정된 대부분 부위에서 차이가 없는 것으로 나타났다. 남측과 북측간의 마이크로피브릴 경각과 강도 역시 측정된 대부분 부위에서 차이가 없는 것으로 나타났다. 남측과 북측 부위간의 접선방향 수축율과 강도에 차이가 드러나지 않은 것은 남측과 북측간의 마이크로피브릴 경각사이에 차이가 없는 점에 기인하는 것으로 생각되었다.

• 대한의용생체공학회:의공학회지
• /
• 제31권3호
• /
• pp.194-198
• /
• 2010

The effective Young’s modulus of a microfibril surrounded by water may be simply calculated by using the upper (Voigt) and lower (Reuss) bounds, which is one way to estimate the Young’s modulus in composite materials. The Steered Molecular Dynamics (SMD) has been used for estimating the Young’s modulus of a microfibril surrounded by water. In this paper, the result estimated by the upper (Voigt) and lower (Reuss) bounds shows 9.2% to 21.8% discrepancy from the result estimated by SMD, but introducing “efficiency of reinforcement parameter” removes the discrepancy and shows good agreement with the result estimated by SMD. We found the best fit for the Young’s modulus against the size of the gap between microfibrils. Also the steps using these bounds are much simpler than SMD.

• Journal of the Korean Wood Science and Technology
• /
• 제48권4호
• /
• pp.569-576
• /
• 2020

This study investigated the characteristics of microfibril angle(MFA) in order to see if there was any difference in pine tree lumber quality among the three mountain areas surrounding the Taebaek Mountains in Korea - Yeongdong (Goseong-gun), Yeongseo (Hongcheon-gun) and Yeongnam (Bonghwa-gun). Pine trees of each mountain area were divided into earlywood and latewood in relation to heartwood part (1959 ~ 1961, 3 annual rings) and sapwood part (2002 ~ 2004, 3annual rings), and measured at tangential section. The microfibril angle showed significant differences between mountain areas. In general, Goseong Mountain was found to have 37.35°, followed by Hongcheon Mountain 32.42° and Bonghwa Mountain 25.75°, in order. The sapwood part had larger angle than heartwood part; and earlywood, than latewood. Variation within a single annual ring tended to be smaller from earlywood toward latewood.

• 농업생명과학연구
• /
• 제45권1호
• /
• pp.9-14
• /
• 2011

Larix kaempferi is a tree with a major economic impact and is processed in large quantity every year in Korea. This study was carried out to collect basic data for the reasonable use of Larix kaempferi and to investigate the relation between anatomical properties and modulus of rupture (MOR) for heartwood and sapwood. As the length of earlywood tracheid and the radial wall thickness of earlywood tracheid and latewood tracheid increased, the modulus of rupture (MOR) increased, but decreased with increasing microfibril angle. Statistical analysis by the stepwise regression technique shows that the main factors affecting the modulus of rupture (MOR) of heartwood are the microfibril angle and the radial wall thickness of latewood tracheid, while those affecting MOR of sapwood are the length of earlywood tracheid and the microfibril angle.

• 한국섬유공학회:학술대회논문집
• /
• 한국섬유공학회 2001년도 학술발표회 논문집(Proceedings of the Korean Textile Conference)
• /
• pp.321-324
• /
• 2001

• Composites Research
• /
• 제16권4호
• /
• pp.74-79
• /
• 2003

Micromechanical 시험법과 음향방출을 이용하여 산소 플라즈마 처리된 PBO와 Kevlar 섬유강화 에폭시 복합재료의 계면물성과 미세파괴메카니즘을 고찰하여 상호 비교하였다. 산소 플라즈마 처리된 PBO와 Kevlar 섬유강화 에폭시 복합재료의 계면전단강도와 접착일은 극성 작용기의 도입으로 향상 시킬 수 있었다. 임계표면장력과 총 표면자유에너지 중 극성 표면자유에너지는 플라즈마 처리된 Kevlar 섬유에서 가장 컸으며. 미처리된 PBO의 섬유의 경우에서 가장 작았다. Microfibril 파단 형상은 산소 플라즈마 처리된 Keviar 섬유의 경우에서는 명확하게 관찰 되었으며. 미처리와 비교차여 microfibril 파단이 대각선 방향으로 연속적해서 일어나 가장 많은 섬유 파단 신호가 감지되었다 비파괴 음향방출법을 이용하여 얻은 섬유파단 감지 결과는 microdroplet과 두 섬유강화 복합재료 시험법에서 광학현미경을 이용하여 관찰한 미세파단 형상과 상호 일치하였다.

• Journal of the Korean Wood Science and Technology
• /
• 제17권3호
• /
• pp.20-27
• /
• 1989

This experiment was made to find the peripheral variations of annualring widths, the cell dimensions, microfibril angles and bulk densities within each annual-ring of horizontal-growing young tree of beech(Betul a platyphylla var. japonica) and Oak (Quercus variabilis) from the tension to the opposite side. Also a comparision between the features of the obnormal annual ring for horizontal-growing year and normal annual ring for the straight-growing years was made. The dimension of propotion of the element, the microfibril angles and the bulk density decreased or increased continuously toward opposite side which showed minimum or maximum value. The dimension of elements the microfibril angles and the bulk density decreased or increased continuously towards opposite side which showed minimum or maximum value. The dimension of elements. the microfibril angles and the bulk density in the normal annual rings were similar to those in the lateral woods. whereas were significantly more different in the tension wood than in the opposite wood. The features of typical opposite wood in the hardwoods were influenced by the locations within the inclined stems than effects of the decrease in the annual ring width. The oppostie woods in hardwoods did not conform to the tension wood and lateral wood. The abnormal annual ring included the opposite wood, lateral wood similar to normal wood and tension wood having specialized structure even in the same annual ring.

• Journal of the Korean Wood Science and Technology
• /
• 제36권4호
• /
• pp.77-83
• /
• 2008

국내에서 생장한 주요 침엽수 3종(소나무, 잣나무, 리기다소나무)의 수간 내 마이크로피브릴 경사각(microfibril angle, MFA)의 축방향 및 방사방향 변이를 요오드 침적법에 의해 조사하였다. 각 수종의 MFA의 평균값은 소나무 $16.4^{\circ}$, 잣나무 $14.4^{\circ}$, 리기다소나무 $26.2^{\circ}$로 리기다소나무가 가장 크게 나타났다. 공시 수종의 MFA는 약 15~20 연륜까지 감소하다가 그 후 거의 안정된 경향을 보여 주었고 만재부의 MFA는 조재부의 MFA보다 다소 작은 경향이 있었다. 공시재료의 수고에 따른 MFA의 차이는 기부 부분에서 다소 크게 나타났으며 수고가 증가함에 따라 MFA는 감소하는 경향이 있었으나 리기다소나무 조재부는 예외였다. 따라서 MFA는 국내산 주요 침엽수재의 미성숙재와 성숙재를 구분하는 지표의 하나로 이용이 가능할 것으로 생각되었다.