• Journal of Pharmaceutical Investigation
• /
• 제38권3호
• /
• pp.171-176
• /
• 2008

Talniflumate is a nonsteroidal anti-inflammatory drug (NSAID), which has been used treat of rheumatoid diseases, is insoluble in water, therefore it has low bioavailability after oral administration. The purposes of this study were to prepare O/W or W/O microemulsions for solubilization of poorly water soluble drug, talniflumate and to formulate into other dosage form. For this purpose, we made O/W or W/O microemulsion with oil(soybean oil, IPM), surfactant (Cremophor $EL^{(R)}$, Tween 80) and water or propylene glycol and evaluated solubility of talniflumate. The microemulsion systems were very stable and showed transmittance above 95% without flocculation or aggregation. Especially, the solubility of talniflumate in the formulation B-1 containing 18% of isopropyl myristate and 71% of tween 80 was 10 times higher than that of other O/W microemulsions. The addition of propylene glycol and N-methylglutamine to the fomulation B-1 showed excellent capacity on the solubilization of talniflumate and the percentage was almost 2.0%. These results suggest that the microemulsion system may be promising for the solubility improvement of talniflumate.

• 대한환경공학회지
• /
• 제22권6호
• /
• pp.1021-1026
• /
• 2000

음이온계면활성제인 sodium di[2-ethylhexyl] sulfosuccinate(AOT)를 isooctane에 용해하여 조제한 W/O형 마이크로에멀젼을 이용하여 수용액중의 카드뮴, 구리 및 크롬 등의 중금속이온을 조작이 간단하고 효과적이며 대량으로 분리처리할 수 있는 시스템을 개발하였다. $Cd^{2+}$, $Cu^{2+}$ 및 $Cr^{3+}$는 W/O형 마이크로에멀젼에 의한 분리 후 3~7분 후에 평형에 도달하였고, 분리율과 분리속도는 수용액의 pH가 증가할수록 증가하였으며 $Cr^{6+}$ 는 전 pH 영역에서 분리제거가 되지 않았다. pH 3.5에서 $Cr^{3+}$는 5분 후에 90%이상 제거되었다. 분리속도식은 유사1차식으로 나타낼 수 있으며, 초기 물질전달계수(Jo)와 수용액 pH의 상관관계를 제시하였다.

• Bulletin of the Korean Chemical Society
• /
• 제33권10호
• /
• pp.3387-3390
• /
• 2012

In this research work the potentialities of microemulsion bulk liquid membrane for the selective transport of L-tryptophan (L-Trp) and L-tyrosine (L-Tyr) are investigated at 298.15 K. Reversed micelle formed by sodium bis(2-ethylhexyl)sulfosuccinate (AOT) in dichloroethane, was used as mobile carrier to transport amino acids between a source and a receiving aqueous phase. The effects of pH, surfactant concentration and initial amino acid concentration on the extraction efficiency and transfer rate of the amino acids were studied. It is verified that for a mixture of two amino acids, L-Trp can be extracted selectively by using this type of the bulk liquid membrane with optimized condition.

• Journal of Pharmaceutical Investigation
• /
• 제17권1호
• /
• pp.41-46
• /
• 1987

Oil in water microemulsion containing soybean oil and egg phosphatide was prepared by vacuum high shear mixing and high pressure homogenizing. The laser particle sizer, Coulter counter and photomicroscope were used to determine the particle size distribution at each cycle of homogenizing. Particularly, the laser particle sizer(dynamic light scattering method) was applied to the study of particle size distribution behavior below $1\;{\mu}m$. It was found that the particle size distribution below $1\;{\mu}m$ was shifted to lower size range as the number of passing cycle was increased. Beyond the 7th cycle, however, the particle size distribution was not varied.

• Macromolecular Research
• /
• 제15권2호
• /
• pp.154-159
• /
• 2007

Polyaniline (PANI) nanospheres, 4 run in diameter, were fabricated by the microemulsion polymerization of octyltrimethyl ammonium bromide (OTAB). The size of the PANI nanoparticles could be controlled as functions of the surfactant concentration, surfactant spacer length and polymerization temperature. The diameter of the PANI nanospheres decreased with increasing surfactant concentration and decreasing temperature. The PANI nanoparticles revealed enhanced conductivity compared to conventional bulk PANIs. In addition, the PANI nanoparticles could be applied as optically transparent conducting materials due to their high conductivity and the nanosize effect. With 9 wt% PANI in the PC matrix, the PANI/PC film exhibited a conductivity of $8.9\times10^{-3}S/cm$ and transparency exceeding 95% over the entire visible light range.

• Korean Chemical Engineering Research
• /
• 제40권6호
• /
• pp.769-777
• /
• 2002

Nonionic surfactant/water/탄화수소 오일/alcohol의 4성분계 시스템에서 12종의 조성물을 제조하여 물성 평가를 수행한 결과, 30.5-31.1 dyne/cm의 낮은 표면장력의 값과, 1.6-7.2 c.p.의 낮은 점도의 물성을 보여 산업용 세정제로서의 기본 물성을 보여주었다. 이들 조성물들이 안정한 단일상으로 존재하는 온도의 범위는 alcohol/surfactant(A/S)비의 증가에 따라 감소되는 경향을 보이고 있으나, 전체적으로는 계면활성제의 hydrophilic lipophilic balance(HLB) 값에 크게 영향을 받고 있으며, HLB 값이 높을수록 안정하게 존재하는 온도 영역이 증가되는 경향을 보여주고 있다. 그리고 각각의 조성물에 물의 함량을 증가 시켜 안정한 단일상이 유지되는 물의 최대 함유량을 측정한 결과 HLB 값이 낮은 계면활성제를 사용하였을 경우 HLB 값이 6.4인 비이온 계면활성제를 사용할 경우 22.1%까지도 물을 함유할 수 있었고, 물의 양이 증가됨에 따라서 단일상으로 존재하는 온도영역은 좁아졌다. 오염원으로 플럭스 제조에 사용되는 abietic acid에 대한 세정 효율을 UV/Visable Spectrophotometer와 FT-IR Spectrometer와 같은 분석기기를 이용하여 검토하여 본 결과, 비이온 계면활성제의 HLB 값이 낮을수록 높은 세정 효율을 보여주어, W/O microemulsion의 경우 비이온 계면활성제에 따른 세정력의 변화가 매우 큼을 확인 할 수 있었다. 그러나 A/S의 비가 증가에 따른 세정효율의 차이는 별다른 경향을 보이지 않았다. 또한 산업세정에 있어서 중요한 세정 요소로 작용하는 변수인 온도 변화와 초음파 주파수의 변화에 따른 세정효율을 측정한 결과, 온도가 높을수록 그리고 초음파의 주파수가 낮을수록 높은 세정력을 보여주었다. 세정 공정 중 린스조에서의 유분 오염물이 함유된 린스액의 유수분리 효율을 측정한 결과, HLB 값이 6.4인 비이온 계면활성제를 사용한 시스템의 경우 $25^{\circ}C$ 이상에서 85% 이상의 높은 제거 효율을 보여, 효율적인 세정 및 관리가 가능한 것으로 판단되었다.

• Korean Chemical Engineering Research
• /
• 제46권2호
• /
• pp.356-368
• /
• 2008

본 연구에서는 계면활성제, 오일, 암모니아 수용액으로 이루어진 시스템에 보조계면활성제 첨가가 단일상의 마이크로에멀젼을 이용한 실리카 나노입자 제조에 미치는 영향에 관하여 살펴보았다. 동일한 연속상의 오일을 사용한 경우, 단일상의 W/O 마이크로에멀젼 영역은 계면활성제와 연속상 오일의 상호작용에 의하여 결정되었다. 예를 들어 연속상 오일로 cyclohexane을 사용한 경우에는 실험에 사용한 NP(nonylphenol ethoxylate) 계면활성제 중에서 NP-5가 가장 넓은 W/O 마이크로에멀젼 영역을 나타냈으며, NP-4가 가장 좁은 W/O 마이크로에멀젼 영역을 나타내었다. NP 계면활성제 시스템에 n-propanol을 보조계면활성제로 첨가한 경우, 단일상의 영역은 연속상 오일의 종류에 따라 증가 또는 감소하였다. 예를 들어, cyclohexane과 isooctane 시스템에서는 n-propanol 첨가에 따라 단일상의 마이크로에멀젼 영역은 감소하나 n-heptane 시스템의 경우에는 증가하였다. 실리카 나노입자 실험을 수행한 결과에 의하면 NP 계면활성제 시스템의 경우 보조계면활성제를 첨가함에 따라 한 상의 영역에서의 제조와 관계없이 많은 수의 불균일한 입자가 생성되었다. LA-5 계면활성제와 n-heptane 시스템에서의 n-propanol 첨가는 입자의 크기는 감소하며, 개수는 증가하는 경향을 나타내었다. 이는 n-propanol 첨가량이 증가함에 따라 계면활성제의 소수 결합이 증가하여 마이크로에멀젼 사이의 상호 물질 교환이 잘 일어나지 않기 때문으로 생각된다.

• Journal of Pharmaceutical Investigation
• /
• 제38권6호
• /
• pp.373-380
• /
• 2008

In order to develop optimal formulation and iontophoresis condition for the transdermal delivery of levodopa, we have evaluated the effect of two permeation enhancers, ethanol and oleic acid in microemulsion, on transdermal delivery of levodopa. In vitro flux studies were performed at $33^{\circ}C$, using side-by-side diffusion cell and full thickness hairless mouse skin. Current density applied was $0.4\;mA/cm^2$ and current was off after 6 hours application. Levodopa was analysed by HPLC at 280 nm. The o/w microemulsions of oleic acid in buffer solution (pH 2.5 & 4.5) were prepared using oleic acid, Tween 80 and ethanol. The existence of microemulsion regions were investigated in pseudo-ternary phase diagrams. Contrary to our expectation, cumulative amount of levodopa transported from microemulsion (pH 2.5) for 10 hours was similar to that from aqueous solution in all delivery methods (passive, anodal and cathodal). When pH of the micro-emulsion was pH 4.5, cumulative amount of levodopa transported for 10 hours increased about 40% (anodal) to 50% (cathodal), when compared to that from aqueous solution. Flux from pH 4.5 microemulsion showed higher value than that from pH 2.5 in all delivery methods. These results seem to indicate that electroosmosis plays more dominant role than electrorepulsion in the flux of levodopa at pH 2.5. The effect of ethanol on iontophoretic flux was studied using pH 2.5 phosphate buffer solution containing 3% or 5% (v/v) ethanol. Flux enhancement was observed in passive and anodal delivery as the concentration of the ethanol increased. Without ethanol, cathodal delivery showed higher flux than anodal delivery. Anodal delivery increased the cumulative amount of levodopa transported 1.6 fold by 5% ethanol after 10 hours. However, in cathodal delivery, no flux enhancement of levodopa was observed during current application and only marginal increase in cumulative amount transported after 10 hours was observed by 5% ethanol. These results seem to be related to the decrease in dielectric constant of the medium and the lipid extraction of the ethanol, which decrease the electroosmotic flow, and thus decrease the flux. Overall, the results provide important insights into the role of electroosmosis and electrorepulsion in the transport of levodopa through skin, and provide some useful informations for optimal formulation for levodopa.

• 대한화장품학회지
• /
• 제22권2호
• /
• pp.20-40
• /
• 1996

The oil in water type ME of 4 component system was composed with POE monoalkyl ether and POE sorbitan monoalkyl ester as surfactant, saturated hydrocarbon, side chain structure and aromatic structure as oil, and glycerine as cosurfactant using high pressure homogenizer. The objective of this study was to examine the role of surfactant and oil structure on droplet size and stability. The experimental results showed that the droplet size was smaller with bigger polarity of oil, less hydrocarbon, longer hydrophilic chain of surfactant and higher concentration of glycerine. SQ and LP systems showed very stable but AB and ISB system unstable microemulsion.

• 한국막학회:학술대회논문집
• /
• 한국막학회 2004년도 Proceedings of the second conference of aseanian membrane society
• /
• pp.187-190
• /
• 2004

Microemulsions gelled by the aid of natural polymers, i.e. microemulsion-based organogels (MBGs), have become of interest as novel tools for enzyme immobilization in hydrophobic solvents [1,2]. Sodium bis(2-ethylhexyl) sulfosuccinate (AOT)is frequently employed as an amphiphile for stable MBG formation.(omitted)