• 대한화장품학회지
• /
• 제38권3호
• /
• pp.209-217
• /
• 2012

화장품 분야에 있어서 마이크로 에멀젼은 잘 알려져 있는 처방이다. 액정형 에멀젼은 마이크로 에멀젼의 한 종류이며, 액정형 에멀젼은 기능성 성분을 포집하는데 사용되어 왔다. 액정은 이름이 의미하듯이 액체와 고체 결정의 중간의 성질을 가지는 물질 상태이다. 주로 계면활성제 이중층 또는 마이셀로 이루어지는데 종류도 다양하고 모양도 상당히 많다. 최근, 마이크로 에멀젼은 콜로이드 과학 분야에서 열역학적으로 안정성을 향상시키기 위해 연구되고 있다. 이번 연구에서는 PEG-8 Capryliccapric Glycerides 와 Polyglyceryl-3 Diisostearate 유화제를 사용하여 마이크로 에멀젼을 제조하였다. 오일과 유화제의 함량 및 2가지 유화제의 비율에 따라 제조된 마이크로 에멀젼을 연구하였다. 또한, 이러한 실험 결과를 바탕으로 기능성 성분을 함유한 액정형 에멀젼의 일종인 페이셜 오일과 클렌징 오일을 개발하는데 그 의의가 있다.

• Journal of Pharmaceutical Investigation
• /
• 제41권1호
• /
• pp.9-17
• /
• 2011

The objective of this work is to study transdermal delivery of calcitonin using iontophoresis and to evaluate various factors which affect the transdermal transport. We have studied the effect of polarity, current density, drug concentration, penetration enhancers (isopropyl myristate [IPM] and ethanol) and laser treatment on transdermal flux and the results were compared. We also investigated the iontophoretic flux from microemulsions containing calcitonin together with oleic acid (OA) or IPM. In vitro flux study was performed at $33^{\circ}C$, using side-by-side diffusion cell and full thickness hairless mouse skin. Anodal delivery at pH 3.0 was much larger than cathodal and passive delivery, due to the positive charge of calcitonin. Cumulative amount delivered (CUM) by cathodal or passive delivery was close to zero for 10 hours. The pretreatment of skin by neat IPM markedly increased the CUM anodically. CUM increased as the current density, drug concentration or the duration of IPM treatment increased. Microemulsion containing IPM or oleic acid was prepared and the phase diagram was constructed. CUM also increased when IPM was incorporated into a microemulsion. OA microemulsion showed similar enhancing effect to IPM microemulsion. The delivery of calcitonin from 70% (v/v) ethanol aqueous solution showed a large increase in flux. Laser treatment of skin before flux experiment exhibited about 2 fold increase in total calcitonin amount transported for 12 hours, when compared to that delivered by IPM microemulsion. Based on these results, we have evaluated the possibility of delivering enough amount of calcitonin to reach the therapeutic level. The data suggest that it is highly possible to deliver clinically effective amount of calcitonin using iontophoresis patch with small area (<10 $cm^2$).

• Journal of Pharmaceutical Investigation
• /
• 제35권4호
• /
• pp.233-241
• /
• 2005

Ursolic acid (UA), a bioactive triterpene acid, has been known to increase collagen content in human skin in addition to other actions such as anti-inflammatory, skin-tumor prevention and anti-invasion. However, it is poorly soluble in water. Therefore, we firstly prepared microemulsion system with benzyl alcohol, ethanol and Cremophor EL, RH 40 and Brij 35 as surfactant in order to increase solubility of UA and then prepared microemulsion was dispersed in o/w cream base for the topical delivery of UA in an effort to improve anti-wrinkle effect. The pseudo-ternary phase diagrams were developed and various microemulsion formulations were prepared using benzyl alcohol as an oil, Cremophor EL, RH 40 and Brij 35 as a surfactant. The droplet size of microemulsions was characterized by dynamic light scattering. The accumulation of VA in the skin from topical cream was evaluated in vitro using hairless mouse skins. The mean droplet size was $26.8{\pm}6.6$ nm for microemulsions II with Cremophor EL. All UA creams showed pseudoplastic flow and hysterisis loop in their rheogram, depending on the type of materials added in topical creams. The in vitro accumulation data demonstrated the UA topical cream prepared with the combination of Poloxamer 407 and Xanthan gum as a copolymer showed higher accumulation percentage than those prepared with either Poloxamer 407 or Xanthan gum. These results suggest that UA topical cream using microemulsion systems may be promising for the topical delivery of UA.

• 대한화장품학회지
• /
• 제21권2호
• /
• pp.22-48
• /
• 1995

본 연구에서는 ME의 각 성분의 구조가 그들의 생성영역, 입자의 크기 및 안정성에 미치는 영향을 고찰하고자 surfactant로서 POE sorbitan fatty acid 계를 사용하였고, oil로는 포화탄화수소계인 liquid paraffin, squalane, 방향족계열인 alkyl benzoate, Isostearyl benzoate를 그리고 cosurfactant로는 glycerine, propylene glycol, sorbitol, 1, 3-butanediol을 사용하여 4성분계 ME을 제조하고, 이 계에서 cosurfactant의 구조적 특성이 ME 생성영역에 미치는 영향과 그리고 oil과 surfactant의 구조 특성이 제조된 ME 입자크기 및 안정성에 미치는 영향을 고찰한 결과, cosurfactant로 polyol류를 사용했을 때, polyol 분자 중 탄소가 같은 경우 OH수가 많을 때, OH기 수가 같을 경우 탄소수가 적을 때 ME생성영역이 크게 나타남을 알 수 있었으며 제조된 ME의 입자 크기를 비교했을 때 oil의 극성이 클수록, surfactant 소수부분의 alkyl chain의 탄소수가 클수록 입자크기가 작게 나타났다. 또한 분산상으로 사용된 oil 중 alkyl benzoate나 Isostearyl benzoatbenzoate 에 비해서 포화탄수소계인 liquid paraffin, squalane으로 구성된 ME의 경시 안정성이 더 양호하였다.

• 공업화학
• /
• 제16권5호
• /
• pp.664-671
• /
• 2005

Alkyl ethoxylates, 비이온 계면활성제, 물, d-limonene으로 이루어진 3성분 계에 보조계면활성제를 첨가한 경우, 단일상의 마이크로에멀젼이 보다 낮은 온도와 넓은 온도 영역에서 형성되었다. 특히 n-propanol을 LA-7 계면활성제계에 첨가할 경우 가장 넓은 온도 영역에서 단일상의 마이크로에멀젼이 형성되며, 보조계면활성제/계면활성제 비율이 0.3 이상인 조건에서 단일상의 마이크로에멀젼이 형성되기 시작하였다. 음이온 계면활성제 SDS를 첨가한 혼합 계면활성제 계의 경우, $30{\sim}65^{\circ}C$까지의 온도 영역에서 단일상의 마이크로에멀젼을 형성함으로써 비이온 계면활성제 계의 온도 변화에 따른 민감성을 저하시킬 수 있었다. 또한 형성된 단일상의 마이크로에멀젼은 $30{\sim}60^{\circ}C$의 온도 영역에서 pH와 경도에 대한 영향을 받지 않으며, 산화방지제에 대한 영향도 매우 작았다. 보조계면활성제와 첨가제 등에 대한 상평형 실험을 통하여 선정한 후보 세정제들은 $30{\sim}40^{\circ}C$의 온도에서 abietic acid에 대한 우수한 세정력을 나타내었다.

• Bulletin of the Korean Chemical Society
• /
• 제33권10호
• /
• pp.3489-3492
• /
• 2012

• Journal of Pharmaceutical Investigation
• /
• 제37권2호
• /
• pp.95-99
• /
• 2007

To develop topical nitroglycerin (NTG) preparation far chronic anal fissure treatment, the release rate of NTG should be controlled carefully. For this, microemulsion was prepared from the phase diagram construction with Cremophor ELP, ethanol and Labrafil $M1944CS^{(R)}$ and the topical gel was prepared by dispersing NTG containing microemulsion into hydrophilic polymers. in viかo release characteristics were evaluated with Franz diffusion cell using cellulose membrane and compared with control hydrogels. The release rate of NTG was followed $1^{st}$ order kinetics and, when comparing the NTG release from control hydrogel with that from the microemulsion-based hydrogel, the NTG release rate was controlled by the content of polymers within continuous phase and the concentration of dispersed phase.

• 한국응용과학기술학회지
• /
• 제19권1호
• /
• pp.56-62
• /
• 2002

Microemulsion is stable to aggregation, sedimentation, fusion and has $3nm{\sim}200nm$ of particle size which is transparent and semitransparent. The isoflavone as a derivatives of Flavone is colorless crystalline compounds. It has similar basic structure to steroid materials which is hormone that acts to skin physiological phenomenon. On this study, we tried to search and demonstrate system content rate of dermal translocation system for cosmetics using O/W type microemulsion containing isoflavone. We manufactured O/W microemulsions by phase inversion emulsification method. It's was found that POE(20) monostearate with HLB value 14 caused microemulsion to be formed, which had $4nm{\sim}18nm$ of average diameter and $3nm{\sim}33nm$ of particle size distribution. Apparent viscosities of the microemulsions have increased in proportion to add surfactant dose.

• Journal of Pharmaceutical Investigation
• /
• 제17권1호
• /
• pp.38-40
• /
• 1987

To optimize the preparation condition of oil in water microemulsion rheological method was used. The viscosity-temperature curve of refined soybean oil was recorded and from this result microemulsion was prepared at various temperatures and evaluated by Coulter counter during 3 weeks. The difference in rheograms of crude emulsion and the microemulsion varying the number of passes in the homogenizer was also examined. From above experiments following conclusions were obtained. 1) Through all the process, temperature was an important factor and the optimum was $60-80^{\circ}C$. 2) By first pass in the homogenizer, most oil droplets were finely dispersed. 3) In the homogenizing step the higher pressure results in the finer dispersion but as the pressure goes up, the differential efficiency of dispersion was decreased.

• 한국응용과학기술학회지
• /
• 제21권4호
• /
• pp.335-344
• /
• 2004

In this work, the properties as polishing wax for automobile of O/W type microemulsion containing wax, liquid paraffine and quaternaryammonium salt was investigated. The microemulsions were prepared at $96{\sim}97^{\circ}C$ by the phase inversion method, and polyoxyethylene(20) sorbitan monooleate (POE(20)SMO) and distearyl dimethyl ammonium chloride(D.D.A.C) as the emulsifiers were used. The mean particle size of the rnicroemulsions was about 7${\pm}$0.5nm and as the properties of polishing wax, gloss increased degree, water resistant gloss degree, initial and final contact angle after water resistance were tested. The result was that the value of water resistantance and contact angle were decreased with increasing amount of POE(20)SMO and D.D.A.C., while the gloss degree values did not affected. And the rnicroemulsion blended with mono ethylene glycol(MEG) of 5${\sim}$15wt% showed smaller particle size and more stable particle size distribution than without MEG. Finally, this microemulsion showed more excellent values of gloss degree, the water resistant gloss degree and contact angle, than two kinds of commercial polishing wax for automobile.