• 제목/요약/키워드: Microcontroller

검색결과 532건 처리시간 0.051초

건물 차양을 위한 RF제어 시스템 제작에 관한 연구 (A Study of Fabrication of RF Control System for Building Sunshade)

  • 박정철;추순남
    • 한국인터넷방송통신학회논문지
    • /
    • 제14권6호
    • /
    • pp.149-157
    • /
    • 2014
  • 본 논문은 건물 차양을 위한 RF 제어 시스템 제작에 관한 연구이다. 저전력, 저전압 UHF 무선 송 수신 칩인 CC1020을 사용하여 주파수 447.8625~447.9875, Data rate 4800Baud, Channel spacing 12.5kHz, SPDT 스위치로 입출력 분리하여 설계하여 Microcontroller 프로그램 하였다. 안테나는 나선형 Helical 안테나 형태로 제작하였다. 시작 제품을 주파수 447.8625~447.9875 무선 공중선 전력을 측정하여 실험한 결과 소출력 무선기기 기준인 10dBm을 넘지 않았다. 차양 효과 실험은 차양을 25%, 50%, 75% 위치에서 실내 온도 및 조도를 1시간 단위로 측정하였다. 실험결과 25% 위치시 조도는 82~87%로 낮아지고, 온도는 $0.6{\sim}1.4^{\circ}C$ 낮아졌으며, 50% 위치시 조도는 60~68%로 낮아지고, 온도는 $2.3{\sim}4.1^{\circ}C$ 낮아졌다. 75% 위치시 조도는 41~47% 낮아지고, 온도는 $3.4{\sim}5.1^{\circ}C$가 낮아졌다.

복권형 하이브리드 스테핑 전동기의 회전차 위치 센서리스 최적 Lead Angle 제어 (Rotor Position Sensorless Control of Optimal Lead Angle in Bifilar-Wound Hybrid Stepping Motor)

  • 이종언;우광준
    • 전자공학회논문지S
    • /
    • 제36S권2호
    • /
    • pp.120-130
    • /
    • 1999
  • 본 연구에서는 복권형 하이브리드 스테핑 전동기의 회전자 위치 함수로 주어지는 순시 상전류식을 유도하여 Laad Angle에 따른 순시 상전류값의 변화를 보이고, 특히 여자 펄스 인가후 ${\pi}/2$ 시점의 수닛 상전류값으로부터 회전자 위치 정보를 얻을 수 있음을 이론식 및 컴퓨터 시뮬레이션에 의해 확인하였다. 이러한 사실으로부터 복권형 하이브리드 스테핑 전동기의 폐루프 운전을 위해 회전자 위치 검출기를 사용하지 않고 전동기의 파라미터가 고려된 최적 Lead Angle이 실현된 여자 펄스를 생성시키는 제어기를 마이크로컨트롤러에 의해 구성하고 실험하였다. 구성된 제어기는 A/D 변환기, 프로그래머블 입.출력 타이머 및 전동기 속도에 대한 최적 Lead Angle 값을 갖는 변환 테이블 등의 기능을 갖는 마이크로컨트롤러와 또한 전동기의 속도와 여자 펄스 인가후 ${\pi}/2$ 시점의 순시 상전류값에 대한 정토오크 발생영역에 해당하는 Lead Angle 값을 갖는 변환 테이블을 위한 ROM 등으로 구성되어 외부 부가회로를 최소화하였으며, 전동기의 파라미터 등의 변화에 따른 제어량의 병환 테이블이 내용과 제어 S/W 에 의존함으로써 유연성을 확보하였다. 이와 같이 구성된 복권형 하이브리드 스테핑 전동기의 회전자 위 센서리스 최적 Lead Angle 시의 순시 상전류 파형과 유사한 파형을 얻음으로써 최적 Lead Angle 이 실현되었음을 확인할 수 있었다.

  • PDF

Zero Crossing Detection 회로 Modeling 및 응용연구 (Modeling and Application Research of Zero Crossing Detection Circuit)

  • 정성인
    • 한국인터넷방송통신학회논문지
    • /
    • 제20권4호
    • /
    • pp.143-148
    • /
    • 2020
  • 교류 전압의 위상을 검출하여 제어하는 시스템의 경우 아날로그 제어방식에서는 검출한 위상에 대해 필터링에 의한 위상 offset 부분을 보상하여 제어에 응용하고 있다. 그러나, 디지털 제어방식에서는 이러한 위상 검출을 이용하여 제어할 경우 마이크로프로세서 혹은 마이크로 컨트롤러의 동작 주파수와 입력 위상 시간과의 오차로 인하여 정밀한 제어를 이룰 수가 없다. 일반적으로 사용하는 방식이 일정한 시간이 되면 누적된 오차를 임의로 보상하여 맞추어주는 방식인데 이러한 경우 보상하기 전까지는 오차를 지속적으로 가지고 갈 수밖에 없는 상황이 발생하게 된다. 이러한 문제점을 해결하기 위해서는 실시간으로 영점을 검출하여 마이크로프로세서의 동작 주파수에 맞도록 보상하는 방법이 필요하게 된다. 따라서 이러한 오차를 줄이면서 정밀한 디지털 제어에 응용하기 위해 본 논문에서 수행하고자 하는 연구는 다음과 같다. 1) 시뮬레이션 모델링을 통해 Zero Crossing Detection 알고리즘을 구현하여 영점을 검출을 통하여 동작 주파수에 맞도록 보상하는 방법에 관해 연구. 2) Microcontroller를 이용한 Zero Crossing Detection 설계를 통하여 실시간으로 영점을 검출하여 마이크로프로세서의 동작 주파수에 맞도록 보상하는 방법에 관해 연구. 3) Zero Crossing Detection 회로를 활용하여 BLDC 전동기의 회전자 위치 추정 연구.

전기화재 예지원리 및 징후검출 시스템 구조 (Prediction Principle and System Structure for the Detection of Incipient Electrical Fire)

  • 김창종
    • 한국조명전기설비학회지:조명전기설비
    • /
    • 제9권4호
    • /
    • pp.71-77
    • /
    • 1995
  • Electrical fire in residential, commercial, and industrial areas occupies 40 percent of overall fire accidents as of the year of 1994. The causes of most electrical fires were studied and, based on this investigation, the principle of the early detection or prediction of the electrical fires is developed. The basic principle is to early detect electrical arcs or sparks caused by faulty connections and insulation failures. the structure of the prediction system based on microcontroller technique is presented.

  • PDF

계통선 연결형 인버터 시스템 구성에 관한 연구 (A PWM Controlled High Frequency Link Inverter for Utility Interface Application)

  • 조기연;유동욱;김은수;배진호
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 1991년도 하계학술대회 논문집
    • /
    • pp.466-470
    • /
    • 1991
  • In this paper, full bridge inverter with IGBT is proposed. By Controlling phase angle difference between 2 arms, PWM controlled high frequency link inverter has VVVF capability. For the simplicity, flexibility and compactness of control circuit, 16 bit single chip microcontroller 8797 BH is used and its characteristic is examined through experiment.

  • PDF

마이크로프로세스를 사용한 CCTV의 동작제어에 관한 연구 (Study on the Motion Control of CCTV by Miroprocessor)

  • 조수현;김지현;유정봉
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 2008년도 학술대회 논문집 정보 및 제어부문
    • /
    • pp.445-447
    • /
    • 2008
  • The CCTV systems is the most extensively used for a burglar proof, a crime prevention and a Prevention forest fires etc. The CCTV systems which is used in present is a PAN/TILT form. We want to control of CCTV systems motion by Up/Down, Left/Right, Zoom In/Out, Focus, TELE. We design a 8051 microcontroller board and a Key Controller and a Relay Controller. We conformed its feasibility through the simulation.

  • PDF

저항막식 터치 패널의 구동회로 제작 (An Implementation of Driving Circuit for Resistive Touch Panel)

  • 한형석
    • 정보통신설비학회논문지
    • /
    • 제8권1호
    • /
    • pp.36-39
    • /
    • 2009
  • In this paper, we propose a 4-wire type driving circuit for resistive touch panel which was manufactured at the lab. The circuit is designed by using the touch panel controller ADS7846 and AVR microcontroller board. The test result shows that the designed circuit can give and transmit the position information of touch panel to the computer.

  • PDF

HID 램프를 자동 인식하는 안정기 설계 (Ballast Design for HID Lamps with Automatic Identification)

  • 이치환
    • 대한전기학회논문지:전기기기및에너지변환시스템부문B
    • /
    • 제54권10호
    • /
    • pp.492-496
    • /
    • 2005
  • An electronic ballast with automatic identification between HPS and MH lamps is proposed in this paper. The behavior of the lamp impedance is studied at both cold-starting and warm-starting. Lamp identification is carried out by taking into account the rate of impedance changing at constant current driving mode just after ignition. The ballast consists of 8-bit microcontroller and LCC resonant inverter.

Development of Ship Data Acquisition Embedded System

  • Yeo, Ng Yin;Park, Soo-Hong
    • Journal of information and communication convergence engineering
    • /
    • 제8권5호
    • /
    • pp.528-533
    • /
    • 2010
  • This research is part of the development of Data Acquisition embedded system that specifically use in ship. The purpose of this data acquisition system mainly is to acquire data from multiple sensors or others related external devices and it will further discuss in this paper. The data collecting, hardware design, software design and the final project outcome of this data acquisition system will be discussed in this paper.

SRM의 최대 토크, 효율 및 최소 토크리플 운전을 위한 스위칭 각 (Switching Angle for Maximizing Torque, Efficiency and Minimizing Torque Ripple in SRM Drive)

  • 김현덕;차현록;김광헌;나석환;임영철
    • 전력전자학회:학술대회논문집
    • /
    • 전력전자학회 1999년도 전력전자학술대회 논문집
    • /
    • pp.151-154
    • /
    • 1999
  • This paper presents a driving method of 3-phase 4-poles SRM(switched reluctance motor) drived by switching angle control. In this study, the switching angle is determined from approximated analysis and computer simulation by using MATLAB for high efficiency according to the speed and torque required by load, and then microcontroller controls the switching angle of asymmetrical inverter in SRM driver. Also, we experiment the maximum forque driving and maximum power driving by controlling switching angle available to electric vehicle.

  • PDF