• Journal of Biosystems Engineering
• /
• 제11권1호
• /
• pp.17-23
• /
• 1986

Speed control of kerosene engine by the combination of a manual throttle and centrifugal weight type governor is not adequate for evaluating energy requirements in laboratory and field performance tests. This paper describes an engine speed control system. This system consists of Apple-II microcomputer, step motor set to the throttle shaft directly, step motor driving and interfacing circuit, engine performance data acquisition system for measuring load, speed and time and potentiometer as speed adjustor. The performance of this system was successful in maintaining engine speed within ${\pm}37$ rpm of reference speed indicated by computer and potentiometer.

• Journal of Biosystems Engineering
• /
• 제11권1호
• /
• pp.24-30
• /
• 1986

In order to collect the engine performance data accurately, rapidly and reliabily, the microcomputer-based engine performance test system was developed and tested. The system measures engine shaft torque and speed, fuel consumption, exhaust gas temperature, engine shaft power and fuel consumption ratio. The system consisted of 32 channels 8 bit A/D converter, time clock, dynamic strain amplifier and signal conditioning circuits to amplify and filter the electrical signal from transducers. Most of transducers were devised for low cost, easy setting and self-manufacturing. The system has been installed on a small kerosene engine (DAEDONG NA50B).

• Journal of Biosystems Engineering
• /
• 제17권3호
• /
• pp.223-228
• /
• 1992

This study was conducted to develop an electro-hydraulic three-point hitch control system using an electro-hydraulic servo valve and microcomputer and to investigate the performance of the three-point hitch control system through indoor and field experiments. 1. The results from indoor experiments coincided with those from computer simulation reported in the previous paper. However, the draft control with the value 4 of Kd showed a slight sustained oscillation after it reached the draft set. 2. From the field experiments, it appeared that the RMS errors increased with the ground speed of tractor. In position control, the three-point hitch control system with electro-hydraulic servo valve showed better performance than that with on-off electro-magnetic valve in the ground speed less than 1.6 m/s. In draft control, however, there was no significant differece in performance between those two systems. 3. In depth control, the both types of electro-hydraulic three-point hitch control system showed better performance than the conventional mechanical-hydraulic three-point hitch control system.

• 대한의용생체공학회:의공학회지
• /
• 제10권3호
• /
• pp.351-360
• /
• 1989

This paper describes the design of portable arrhythmia monitor and associated algorithm for automated diagnosis based-on microcomputer in the ambulatory ECG recording, analysis, and transmitting to a hospital host computer immediately through the telephone system. The device differs from Molter recorder in that it does not store normal ECG signals but captures and alarms the ECG during suspected abnormal periods and selected temporal epochs to a central hospital site. This porta file arrhythmia monitor makes use of a general purpose computer and software will be changed to meet the custom requirements of individual physicians and patients. At present it is very obvious that each cardiologist has his own method of analyzing ECG recordings and utilizes past experience more than the firm quantitative analysis of data.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1987년도 전기.전자공학 학술대회 논문집(II)
• /
• pp.1481-1484
• /
• 1987

The ALU of CMOS microcomputer have been designed with the 3um design rule for CMOS polysilicon gate and Its cells were layed out. The operation of circuits were simulated with EDAS_P. The widths and lengths of gates In the circuit were determined using SPlCE. The carry delay of the ALU was Improved by Manchester carry method. The results of logic and circuit simulation were in good agreement with expected circuit characteristics.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1987년도 전기.전자공학 학술대회 논문집(II)
• /
• pp.1326-1328
• /
• 1987

This paper describes the design of digital signal processing system for the automatic diagnosis of ECG. The system comprises analog hardware, digital hardware, and control system by microcomputer. Also, since digital signal processing system can be equipped easily in microcomputer for the compact size(Single board), We expect to develop the Portable ECG Automatic Diagnosis System using this System.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1987년도 전기.전자공학 학술대회 논문집(II)
• /
• pp.1268-1270
• /
• 1987

This paper suggests several simple and efficient algorithms for detecting the ECG Signal by Microcomputer's software. The ECG signal detection was performed with the Linear Approximation and the feature extraction. The linear transformation approximates a given waveform by a piecewise-linear function with a preset upper bound on the absolute error between the functional values of the original function and the approximation. And the feature extraction from ECG signal, the features are different wave amplitudes, durations and interwave intervals, used the slope, the amplitude and time-Duration of ECG Sinal.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1987년도 전기.전자공학 학술대회 논문집(II)
• /
• pp.1499-1502
• /
• 1987

The control part of one-chip microcomputer has been designed with the 3um design rule for CMOS poly silicon gate and Its cells were layed out. The operation of the logic circuits were simulated with EDAS_P. The widths and lengths of circuit were determined by using PSPICE. The control part of microcomputer has designed by using hardwired methode. Results of logic simulation and circuit simulation are in good agreements with expected circuit characteristics.

• 한국통신학회논문지
• /
• 제11권3호
• /
• pp.197-203
• /
• 1986

아날로그 映像信號를 디지털 變換하여 마이크로컴퓨터에 入力시킨 다음 變換符號化(trarm coding)를 遂行하였다. 入力 및 處理 時에 遂行時間을 短縮시키는 것을 目的으로 하여 64$\times$64화소로 信號를 滅縮하고 外部메모리를 內部메모리의 番地로 對替시키는 것으로써 빠른 入出力 方法을 채택하였다. Hadamard 直交 變換과 中央에 weight를 준 weighted hadamard變換 그리고 haar 變換을 assembly言語의 高速計算 알고리즘으로 프로그램하여 一秒 이내에 變換終了할 수 있도록 하였으며 各 變換을 比較하였다.

• 대한전기학회논문지
• /
• 제36권7호
• /
• pp.492-500
• /
• 1987

Microcomputer-based PID governor which can be provided either stability or rapid response for small hydro power plant at low cost is developed and adapted to the 5 KW model hydro power for the performance test. The effects of PID gains on stability boundaries of the hydraulic turbine generating system is investigated. For the optimum selection of the PID gains, general equations are derived on the base of the experiments. This control system has a good performance at the model of hydro power plant. For the prediction of the control system, a mathematical model was developed and the results of the simulation using this model was matched with the experimental results.