• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.20 no.6
• /
• pp.409-415
• /
• 2008

Recently, Indoor air quality (IAQ) is one of the most important problem in our daily life of modern societies. Mechanical ventilation system is being recommended as an effective method to improve IAQ in apartment houses. And then, in Korea, building industry should install ventilation system in apartment house by the building construction code. In this study, to improve IAQ caused by microbial and chemical contaminant such as bacteria and TVOC, three types of mechanical ventilation system of apartment house including HRV were simulated by multizone modeling. Simulation results suggest an appropriate and economical renovation method of apartment house ventilation system for reducing indoor air contamination.

• Food Science and Preservation
• /
• v.12 no.5
• /
• pp.417-423
• /
• 2005

To replace the traditional drying method with improving the qualities of dried squid, warm air drying method was investigated comparing with natural drying method. In respect of drying rate, about 12 hrs were taken to obtain 25% moisture content -which was considered as proper moisture content to control microbial and quality degradation- by warm air drying at 35$^{\circ}C$. However, 120 hrs were taken to obtain such moisture content by natural drying. The squid dried by warm air showed little color difference and was seemed to be raw squid meat color. TBA values were more rapidly increased but final values were lower, inversely. Free amino acid contents were higher, and cholesterol content was lower in warm air drying.

• Journal of Food Hygiene and Safety
• /
• v.26 no.4
• /
• pp.361-365
• /
• 2011

To evaluate the indoor air quality of food manufacturing plants, the presence of viable bacteria and fungi was assessed in the indoor air of the facilities at which 9 food items were manufactured. Air samples were collected from the general zone, low clean zone and clean zone of each factory with an air sampler, in combination with plate counts agar using for bacteria, and dichloran-glycerol agar for fungi. The samples were incubated at $25^{\circ}C$ for 4 to 7 days. After culture, the colony forming units (CFU) on each plate were counted and corrected with a positive hole conversion table. The average concentration of bacteria was $2.2{\times}10^3\;CFU/m^3$ in the general zone, $1.2{\times}10^3\;CFU/m^3$ in the low clean zone and $7.3{\times}10^2\;CFU/m^3$ in the clean zone. The average concentration of fungal microbes was $2.5{\times}10^3\;CFU/m^3$ in the general zone, $2.6{\times}10^3\;CFU/m^3$ in the low clean zone, and $2.0{\times}10^2\;CFU/m^3$ in the clean zone. No meaningful differences were detected between the general zone and the low clean zone, but the clean zone had significantly lower concentrations than the other zones. Additionally, the identification of the fungi was performed according to morphological method using a giant culture and slide culture. The fungi were identified as belonging to 18 genera, and the genera Cladosporium(33%), Penicillium(29%) and Aspergillus(26%), predominated. Aspergillus isolates were identified to species level, and A. ochraceus, a mycotoxigenic species, was identified. As part of the effort to control the quality of the indoor air of food manufacturing plants, our results show that continued studies are clearly warranted.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.43 no.1
• /
• pp.135-140
• /
• 2014

Pre-storage ultra-violet (UV) light treatment on fresh produce is known to inactivate the contaminated microorganisms, activate the defense system, and delay ripening extending the shelf life. As UV light emitting diode (LED) becomes available at a relatively low price, continuous or intermittent UV treatment during chilled storage is possible in a container or package. This study attempted an in situ UV LED treatment on fresh produce stored under a refrigerated container in order to see its potential in the fresh produce storage and further optimize its application conditions. The effect of in-container UV LED irradiation on the quality preservation of shredded carrots was investigated in the air and modified atmosphere (MA) conditions. Two sets of experiment with Escherichia coli inoculation and with natural microbial flora in the air (two 30 minute on-off cycles of 1 $diode/dm^2$ per day at a location above 2 cm) showed a clear and significant effect of the UV LED irradiation on the suppression of microbial growth: 280 nm was the most effective by maintaining a lower microbial count by at least 0.5 log (CFU/g) throughout the 6 day storage period. The carotenoids content of shredded carrots subjected to UV LED treatment at 365 and 405 nm in the air was higher than that of the control shredded carrots. In MA condition of $O_2$ of 1.2~4.3% and $CO_2$ of 8.4~10.6% being indifferent with LED wavelengths, 280 nm UV LED irradiation was also effective in inhibiting the microbial growth. While there was no observed difference in the carotenoids content between untreated and UV LED-treated shredded carrots in MA, UV LED irradiation at 365 and 405 nm was slightly better in DPPH radical scavenging activity. The use of UV LED in storage container or package seems to give the benefits of preserving the microbial and nutritional qualities of minimally processed fruits and vegetables.

• Food Science of Animal Resources
• /
• v.38 no.2
• /
• pp.251-258
• /
• 2018

We investigated microbial and quality changes in wrap-packaged dry-aged beef after completion of aging and subsequent storage in a refrigerator. After 28 days of dry aging (temperature, $4^{\circ}C$; RH, approximately 75%; air flow velocity, 2.5 m/s), sirloins were trimmed, wrap-packaged, and stored at $4^{\circ}C$ for 7 days. Analyses of microbial growth, pH, volatile basic nitrogen (VBN), 2-thiobarbituric acid-reactive substance (TABRS), and instrumental color, myoglobin, and sensory evaluation were conducted on days 0, 3, 5, and 7. The results show that the number of total aerobic bacteria (TAB), yeast, and lactic acid bacteria increased with an increase in storage days, whereas no change in the growth of mold was observed during 7 days of storage. Based on the legal standard for TAB count, the estimated shelf-life of wrap-packaged dry-aged beef was predicted to be less than 12.2 days. However, the shelflife should be less than 6.3 days, considering the result of sensory quality (odor, taste, and overall acceptance). No significant change in visible appearance was also observed during 7 days of storage. The results suggest that the present quality indicators for meat spoilage (pH, VBN, and TBARS) should be re-considered for dry-aged beef, as its characteristics are different from those of fresh and/or wet-aged beef.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.9 no.1
• /
• pp.13-19
• /
• 2021

In modern society, indoor activities time is increasing due to industrial development. Interest in indoor air quality is increasing as indoor activity time increases. The main causes of indoor air pollution are formaldehyde which a chemical cause, and fungi which a biological cause. Phytoncide effectively reduces Formaldehyde and Fungi. Charcoal which possess porous-structure has a good absorbance of pollutants. In this study, the authors manufactured functional cement matrix using by phytoncide and charcoal to remove formaldehyde and fungi. In this study, Functional cement matrix reduced formaldehyde and Fungi and effectively improve indoor air quality.

• Asian-Australasian Journal of Animal Sciences
• /
• v.23 no.10
• /
• pp.1380-1385
• /
• 2010

Buffalo meat patties with two fat levels, F1 (15% added fat) and F2 (5% added fat and 3% tapioca starch), were cooked in a pre-heated hot air oven (HO) at $175{\pm}2^{\circ}C$ for 15 min, in a microwave oven (MO) for 70 sec and by pressure cooking (PC) at 15 psi pressure for 10 min. and compared for physico-chemical, processing, sensory and microbiological quality attributes. F2 had significantly (p<0.05) higher value for the moisture and moisture protein ratio than F1. However, MO and PC patties had significantly (p<0.05) higher moisture content than HO-cooked buffalo meat patties irrespective of fat content. Highest fat percentage was in MO patties while the minimum was in PC patties. Moisture and fat retention and cooking yield were highest in MO patties irrespective of added fat content in the formulation. Cooking yield and dimensional parameters were better maintained in F2 than F1. Sensory scores viz. appearance and color, flavour, juiciness and texture for HO patties were better than other cooking methods. Sensory panelists rated overall acceptability of HO patties very good to excellent, whereas PC and MO patties were rated as good to very good irrespective of fat content. Microbiological quality was comparable in both groups irrespective of cooking methods used.

• Korean Journal of Food Science and Technology
• /
• v.34 no.6
• /
• pp.947-953
• /
• 2002

Two types of electronic nose were used for investigating the quality of dried lavers stored at 5, 15, and $30^{\circ}C$ RH of 32, 43, and 75%. The electronic nose is composed of metal oxide sensors, and GC is based on SAW sensor. Quality change in dried lavers was described in terms of the sensitivities $(R_{gas}/R_{air})$ of the sensors. Principal component analysis (PCA) was carried out using data obtained from six metal oxide sensors. The first principal component scores were correlated with quality changes of dried lavers. As storage time increased, the stored laver cluster separated from that of fresh lavers. A chromatogram was obtained from GC based on SAW sensor. Olfactory image, A $VaporPrint^{TM}$ image for pattern recognition, showed a significant difference between the stored and the fresh samples. Dried lavers during storage at $30^{\circ}C$ and 75% had bacterial counts of $5.7{\times}10^6\;CFU/g$ after 8 day. Increase of microbial count correlated with the response of electronic nose $(r^2=0.87)$. Whereas, color values showed no correlation.

• Journal of Food Hygiene and Safety
• /
• v.30 no.1
• /
• pp.74-80
• /
• 2015

In this study, the microbial control effect after treatment of washing solutions (tap water, electrolyzed water, chlorine dioxide solution) and quality changes were investigated when Kwamegi is produced by means of the cold air drying. The initial moisture rate of the sample was 56.62% before drying. At the beginning of drying period, moisture rate sharply fell down but as the experiment progressed, moisture reducing rate was smoothly decreased. The color difference of Kwamegi before drying was 42.40, but it was reduced depending on the increment of drying temperature and time. TBA value of the initial sample was 0.219, rancidity were increased continuously when drying progressed. Total amino acid content was showed the highest value at $25^{\circ}C$ for 36h and the lowest at $40^{\circ}C$ for 12h. From the fatty acids analysis, major fatty acids were consisted of the 14:0, 16:0 and 18:1 (18.1520.96%, 28.0632.51% and 17.0619.81%, respectively). The microbial control effect was biggest when Kwamegi was washed with chlorine dioxide 100ppm for 60s. The microbe of the Kwamegi, Pseudomonas sp. and Pseudomonas putida were identified.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.24 no.3
• /
• pp.300-309
• /
• 2014

Objectives: The objective of this study is to evaluate microbial exposure hazards in the metal-working fluids(MWF) handling industry. Methods: Air quality parameters(airborne bacteria, fungi, endotoxin and oil mist) and bulk MWF in storage tanks were evaluated at 54 points at nine sites in South Korea. Results: The geometric means(GM) of culturable airborne bacteria, fungi, endotoxin and oil mist concentration were $133CFU/m^3$(n=376, range $7{\sim}6,510CFU/m^3$), $159CFU/m^3$(n=381, range $7{\sim}8,469CFU/m^3$), $8.06EU/m^3$(n=103, range $0.34{\sim}280.4EU/m^3$) and $0.20mg/m^3$(n=104, range $0.01{\sim}2.87mg/m^3$), respectively. The ratio of indoor to outdoor concentration was 2.7 for bacteria, 6.1 for endotoxin, and 4.8 for oil mist. Even though average airborne bacteria concentration did not exceed recommended exposure limits($1,000CFU/m^3$), MWF in the storage tanks was highly contaminated with bacteria(arithmetic mean $2.1{\times}10^6CFU/ml$) and exceeded recommended bacteria limits($10^5CFU/ml$). Conclusions: It is necessary for MWF handling workplaces to conduct periodical biohazard inspection of MWF storage tanks. Additionally, further research may be necessary to establish biological occupational exposure limits.