• 한국산림과학회지
• /
• 제108권1호
• /
• pp.50-58
• /
• 2019

우리나라에서 발생된 땅밀림지의 지형특성을 분석하여 땅밀림지에 대한 지형적인 기초자료를 제공하기 위하여 실시하였다. Aspect ratio가 1.00 미만인 땅밀림지는 전체 37개소 중 17개소(약 46.0 %)로 0.37 ~ 0.92의 범위를 나타내었다. 또한 Aspect ratio가 2.00 미만인 경우는 전체 37개소 중 36개소(약 97.0 %)이었다. 종단형상비가 1.00 미만인 땅밀림 지역은 총 37개소 중 15개소(약 41.0 %)이었으며, 1.00 이상인 땅밀림지는 22개소(약 59.0 %)이었다. 우리나라에서 발생한 전체 37개소의 땅밀림지 중 평면형지형은 말발굽형이 가장 많은 것으로 나타났다. 또한 미세지형은 철(凸)상대지상 지형이 가장 많은 것으로 나타났다. 땅밀림지역의 미세지형의 등고선 간격을 평균한 결과 29.4(9.5 ~ 83.2)m이었으며, 땅밀림지 내에서 미세지형을 제외한 땅밀림지 내의 평균등고선 간격은 24.3(14.4 ~ 59.4)m로 미세지형이 5.1(4.9 ~ 23.8)m 더 넓게 나타났다. 우리나라에서 발생한 땅밀림지 내에서 미세지형의 평균 등고선 간격과 미세지형을 제외한 평균 등고선 간격의 T-test 분석 결과 5 % 수준에서 유의한 것으로 나타났다.

• 대한치과의사협회지
• /
• 제54권12호
• /
• pp.985-995
• /
• 2016

Titanium (Ti) has been widely used for dental implant due to great biocompatibility and bonding ability against natural alveolar bone. A lot of titanium surface modification has been introduced in dentistry and, among them, methods to introduce micro/nano-roughened surface were considered as clinically approved strategy for accelerating osseointegration of Ti dental implant. To have synergetic effect with topography oriented favors in cell attachment, chair-side surface treatment with reproducibility of micro/nano-topography is introduced as next strategy to further enhance cellular functionalities. Extensive research has been investigated to study the potential of micro/nano-topography preserved chair-side surface treatment for Ti dental implant. This review will discuss ultraviolet, low level of laser therapy and non-thermal atmospheric pressure plasma on Ti dental implant with micro/nano-topography as next generation of surface treatment due to its abilities to induce super-hydrophilicity or biofunctionality without change of topographical cues.

• 한국윤활학회:학술대회논문집
• /
• 한국윤활학회 2002년도 제35회 춘계학술대회
• /
• pp.25-33
• /
• 2002

Effect of surface topography on the water wetting nature and micro/nano tribological characteristics of Si-wafer and PTFE was experimentally studied. The ion beam treatment was performed with a hollow cathode ion gun in different argon don dose conditions in a vacuum chamber to change the surface topography, Micro/nano tribological characteristics, water wetting angles and roughness were measured with a micro tribo tester, SPM (scanning prove microscope), contact anglemeter and profilometer, respectively. Results showed that surface roughness increased with the argon ion dose. The water wetting angle of tile ion beam treated samples also increased with the ion dose. Results also showed that micro-adhesion and micro-friction depend on the wetting characteristics of the PTFE samples. However, nano-triboloSical characteristics showed little dependence on the wetting angles. The water wetting characteristics of modified PTFE samples were discussed in terms of the surface topographic characteristics.

• KSTLE International Journal
• /
• 제3권1호
• /
• pp.12-16
• /
• 2002

Micro/nano tribological and water wetting characteristics of ion beam treated PTFE (polytetrafluoroethylene) surfaces were experimentally studied. The ion beam treatment was performed with a hollow cathode ion gun at different argon ion dose conditions in a vacuum chamber to modify the topography of PTFE surface. Micro/nano tribological characteristics, water wetting angles and roughness were measured with a micro tribe tester, SPM (scanning probe microscope), contact anglemeter and profilometer, respectively. Results showed that surface roughness increased with the argon ion dose. Water wetting angle of the ion beam treated samples increased with the ion dose, so the surface shows an ultra-hydrophobic nature. Micro-adhesion and micro-friction depend on the wetting characteristics of the PTFE samples. However, nano-tribological characteristics showed different results. The scale effect of surface topography on tribological characteristics was discussed. Also, the water wetting characteristics of modified PTFE samples were discussed in terms of the surface topographic characteristics.

• Ocean Systems Engineering
• /
• 제1권3호
• /
• pp.195-205
• /
• 2011

A method for calibrating a laser profiling system for seafloor micro-topography measurements is described. The system consists of a digital camera and an arrangement of six red lasers that are mounted as a unit on a remotely operated vehicle (ROV). The lasers project as parallel planes onto the seafloor, creating profiles of the local topography that are interpreted from the digital camera image. The goal of the calibration was to determine the plane equations for the six lasers relative to the camera. This was accomplished in two stages. First, distortions in the digital image were corrected using an interpolation method based on a virtual pinhole camera model. Then, the laser planes were determined according to their intersections with a calibration target. The position and orientation of the target were obtained by a registration process. The selection of the target shape and size was found to be critical to a successful calibration at sea, due to the limitations in the manoeuvrability of the ROV.

• 한국농림기상학회지
• /
• 제21권4호
• /
• pp.277-285
• /
• 2019

아고산 지역에서 지형은 바람과 일사, 토양수분함량 등에 영향을 주며 식물의 생장과 발달에 중요한 영향을 미친다. 아고산 지역에서 바람막이 지형이 가문비나무의 수관 생장에 미치는 영향을 알아보기 위해 서식지를 사면과 미지형에 따라 구분하고, 수고와 수관생장을 조사하였다. 아고산 지역의 가문비 나무는 서식지 내 바람의 영향과 미지형에 따라 수고 생장과 수관 생장이 다르게 나타났다. 바람맞이 사면에서 수고 생장과 수관생장률이 낮았고, 바람맞이 사면의 홀로 돋아져 바람과 같은 외부 환경에 노출된 미지형에서 자라는 나무는 바람의지 사면의 주변식생과 함께 자라는 나무보다 수관 생장이 절반 수준으로 낮았다. 바람의 영향이 강한 곳에서는 바람이 불어오는 방향으로 수관 생장이 억제되어 수관이 깃발형으로 발달하였다. 바람맞이 사면에서도 바람에 노출된 미지형 1 유형은 바람막이 역할을 하는 지피물이 존재하는 미지형 3 유형에 비해 수관의 기형이 심하였다. 본 연구는 바람이 심한 아고산 지역의 지형과 생장의 관계를 분석하여 가문비나무의 분포와 생장에서 바람막이 지형의 역할이 중요함을 보여주었다. 아고산 서식지 관리와 복원을 위해서 바람의 영향을 고려한 사면과 지형별 분포에 대한 분석이 필요하다.

• 한국표면공학회:학술대회논문집
• /
• 한국표면공학회 2018년도 춘계학술대회 논문집
• /
• pp.24-24
• /
• 2018

One of the challenges in tissue engineering is the design of optimal biomedical scaffolds, which can be governed by topographical surface characteristics, such as size, shape, and direction. Of these properties, we focus on the effects of nano - to micro - sized hierarchical surface. To fabricate the hierarchical surface structure on poly(${\varepsilon}$-caprolactone) (PCL) film, we employed a nano/micro-casting technique (NCT) and modified plasma process. The micro size topography of PCL film was controlled by sizes of the micro structures on lotus leaf. Also, the nano-size topography and hydrophilicity of PCL film were controlled by modified plasma process. After the plasma treatment, the hydrophobic property of the PCL film was significantly changed into hydrophilic property, and the nano-sized structure was well developed, as increasing the plasma exposure time and applied power. The surface properties of the modified PCL film were investigated in terms of initial cell morphology, attachment, and proliferation using osteoblast-like-cells (MG63). In particular, initial cell attachment, proliferation and osteogenic differentiation in the hierarchical structure were enhanced dramatically compared to those of the smooth surface.

• 대한기계학회논문집A
• /
• 제30권6호
• /
• pp.713-721
• /
• 2006

Micro-drill wear deteriorates accuracy and productivity of the micro components. In order to improve productivity and qualify of micro components, it is required to investigate micro-drill wear exactly. In this study, a machine vision system is proposed to measure the wear of micro-drills using a precision servo stage. Calibration experiments are conducted to compensate for the machine vision system. In this paper, worn volume, area and length are defined as wear amounts. Micro-drill wear is reconstructed as the 3D topography and the quantized wear amount by using the shape from focus (SFF) method and wear parameters. Experiments have been conducted with HSS twist micro-drills and SM45C carbon steel workpieces. Validity of the proposed machine vision system is confirmed through experiments.

• 한국환경과학회지
• /
• 제14권8호
• /
• pp.739-748
• /
• 2005

The purpose of this study is to analyze seasonal changes in structure and landscape of Gongji stream corridor in Chuncheon, and to suggest some guidelines to contribute to creating a desirable close-to- nature stream. The study seasonally surveyed floodplain and revetment conditions, channel micro-topography, streamflow level and velocity, and vegetational cover. Flooding, water level, and vegetation were major factors of affecting seasonal changes in streambed structure and stream landscape. Small sand bars and islands were considerably disturbed by flooding and water level change. However, large islands and sand bars in the upper and middle section of the study stream remained or reappeared even after flooding. Flooding also tended to repeat channel sedimentation at the same spot. Controlling water volume of the Euiam Lake, which is adjacent to the study stream, caused higher water level downstream in the dry seasons. The majority of vegetation in sand bars and islands was washed away by the floods. Vehicle passing, crop cultivation, and ball game were other elements which disturbed vegetation in the floodplain. Creating a close-to-nature stream should reflect micro-topographical changes of channel by flooding, prevent improper vehicle entry and human use, and remove concrete material in the revetment and floodplain.

• 한국습지학회지
• /
• 제16권4호
• /
• pp.353-362
• /
• 2014

본 연구에서는 둔촌동 습지에서 미지형이 식물 군락 구성에 미치는 영향을 연구하기 위하여 2007~2008년에 걸쳐 지형에 따른 수위 변화와 식물 군락의 변화를 조사하였다. 조사 지역을 지대가 낮은 지형부터 높은 지형까지 4개 구역으로 구분하여 조사하였으며, 각각의 구역은 조사 지역 면적 대비 약 11%, 10%, 18%, 24%의 면적을 가지고 있었다. 조사 기간동안 수환경의 pH는 6.10(${\pm}0.13$), 전기전도도는 $51.5({\pm}6.0){\mu}s/cm$이었으며, $PO_4$-P, $NO_3$-N, $NH_4$-N은 각각 $0.04({\pm}0.02)mg/L$, $0.14({\pm}0.07)mg/L$ 그리고 0.01mg/L 이하로 유지되었다. 2008년 3~4월 누적 강수량이 2007년 대비 약 56%로 적었던 것이 지대가 낮은 지형에서 수위 환경 차이를 유발하여 식물 군락 형성에 매우 큰 영향을 미쳤으며, 지형의 높이에 따라 해당 구역을 우점하는 식물 길드가 다르게 나타났다. 이러한 결과는 종자로부터 생활사가 시작되는 1년생 식물 종들이 조사 지역을 전체적으로 우점하였기 때문이며, 다양한 길드의 식물들이 혼재하기 위해서는 높이 구배가 있는 미지형이 조성되어야 한다는 것을 의미한다.