• 산업기술연구
• /
• 제30권B호
• /
• pp.17-23
• /
• 2010

Since the propagation of a short fatigue crack is directly related to the large crack which causes the fracture of bulk specimen, the detailed study on the propagation of the short crack is essential to prevent the fatigue fracture. However, a number of recent studies have demonstrated that the short crack can grow at a low applied stress level which are predicted from the threshold condition of large crack. In present study, the threshold condition for the propagation of short fatigue crack is examined with respect to the micro-structure and cyclic loading history. Specimens employed in this study were decarburized eutectoid steels which have various decarburized ferrite volume fraction. Rotating bending fatigue test was carried out on these specimens with the special emphasis on the "critical non-propagating crack length" It is found that the reduction of the endurance limit of their particular micro-structures can be due to the increase of the length of critical non-propagating crack, and the quantitative relationship between the threshold stress ${\sigma}_{wo}$ and the critical non-propagating crack length $L_c$ can be written as ${\sigma}_{wo}{^m}{\cdot}L_c=C$ where m,C is constant. Further experiments were carried out on cyclic loading history on the length of critical non-propagating crack. It shown that the length of critical non-propagating crack is closely related to cyclic loading history.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1993년도 한국자동제어학술회의논문집(국내학술편); Seoul National University, Seoul; 20-22 Oct. 1993
• /
• pp.853-858
• /
• 1993

The error back-propagation(BP) algorithm is widely used for finding optimum weights of multi-layer neural networks. However, the critical drawback of the BP algorithm is its slow convergence of error. The major reason for this slow convergence is the premature saturation which is a phenomenon that the error of a neural network stays almost constant for some period time during learning. An inappropriate selections of initial weights cause each neuron to be trapped in the premature saturation state, which brings in slow convergence speed of the multi-layer neural network. In this paper, to overcome the above problem, Micro-Genetic algorithms(.mu.-GAs) which can allow to find the near-optimal values, are used to select the proper weights and slopes of activation function of neurons. The effectiveness of the proposed algorithms will be demonstrated by some computer simulations of two d.o.f planar robot manipulator.

• 한국지반공학회논문집
• /
• 제18권6호
• /
• pp.17-24
• /
• 2002

본 연구에서는 초음파실험을 통하여 카올린 점토 시료의 초음파 전파 속도와 감쇠특성을 조사하였다. 슬러리 압밀 방법을 이용하여 이산구조와 면모구조를 갖는 두 종류의 카올린 점토를 인공적으로 제작하였다. 초음파를 이용하여 각 구조를 가진 점토의 압축파 속도 및 감쇠 거동을 측정하였다. 측정시 가진 주파수, 시료 길이, 측정 방향 등을 변화시키며 그에 대한 영향을 조사하였다. 실험 결과 전파속도는 같은 압축 응력 조건에서 제작된 본 시료의 경우 미세구조의 영향이 크지 않았으나 감쇠 특성은 미세구조의 영향이 큰 것으로 나타났다.

• 한국조경학회지
• /
• 제21권1호
• /
• pp.83-94
• /
• 1993

After coming this century, as the propagative method of plants on a scientific foundation has been accompanied systematically, it has played an important part in the improvement of cultivar. But an existing propagative technique is not a few defects in our tasks and industrial structure which changes every hour and envirnment which undergoes a sudden change. To use developed biological knowledge recently, and existing propagative method which is main axis in sexual reproductive crossing, is increased much in the inside of internal organs by asexual reproductive means which is on a different level, and by, introducing a new character, it improves an inherited character etc. We have observed methods which supplement or replace a defect. These methods are not yet ripe for putting to practical use in the present research phase but convinced that they will offer an epoch-marking turning point.

• 대한기계학회논문집
• /
• 제12권2호
• /
• pp.278-285
• /
• 1988

본 연구에서는 SM15C재와 SM35C재에 퍼얼라이트, 페라이트 조직의 영향을 배재한 비교적 균질한 조직인 구상화시멘타이트조직과 SM35C재에 실용조직 이면서 비교적 균질한 조직인 마르텐사이트 조직을 만들고, 가공하였다.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2003년도 제20회 춘계학술대회 논문집
• /
• pp.270-273
• /
• 2003

The characteristic of constant volume micro combustor was investigated experimentally. The shape of micro combustor was cylindrical and has row aspect ratio or has relatively large diameter compared with chamber height. Diameter and chamber height was varied to investigate the geometric effect of combustor on the flame propagation. Diameter of 15 mm and 7.5 mm was designed while chamber height was designed to be 1mm, 2mm, and 3mm. The effect of initial pressure was also investigated parametrically from 1bar to 3bar. The gas used in this study was stoichiometric mixture of methane and air. The maximum pressure achieved in down scaled combustors was lower than that of conventional combustor because heat loss to wall was dominant as expected. The maximum pressure responded favorably with the change of height of combustor and the initial pressure, the maximum pressure was also increased. The flame propagation was possible when the specific condition was satisfied. Although the quenching distance of stoichiometric mixture of CH4 and Air is 2.5 mm, the flame could propagate even under quenching distance as the initial pressure increased.

• Geomechanics and Engineering
• /
• 제20권1호
• /
• pp.29-41
• /
• 2020

It is extremely important to obtain rock strength parameters for geological engineering. In this paper, the evolution of sandstone cohesion and internal friction angle with plastic shear strain was obtained by simulating the cyclic loading and unloading tests under different confining pressures using Particle Flow Code software. By which and combined with the micro-crack propagation process, the mesoscopic mechanism of parameter evolution was studied. The results show that with the increase of plastic shear strain, the sandstone cohesion decreases first and then tends to be stable, while the internal friction angle increases first, then decreases, and finally maintains unchanged. The evolution of sandstone shear strength parameters is closely related to the whole process of crack formation, propagation and coalescence. When the internal micro-cracks are less and distributed randomly and dispersedly, and the rock shear strength parameters (cohesion, internal friction angle) are considered to have not been fully mobilized. As the directional development of the internal micro-fractures as well as the gradual formation of macroscopic shear plane, the rock cohesion reduces continuously and the internal friction angle is in the rise stage. As the formation of the macroscopic shear plane, both the rock cohesion and internal friction angle continuously decrease to a certain residual level.

• Journal of Mechanical Science and Technology
• /
• 제20권3호
• /
• pp.310-318
• /
• 2006

In this study, we investigate the feasibility of in-situ crack propagation by using a double cleavage drilled compression (DCDC) specimen showing a slow crack velocity down to 0.03 mm/s under 0.01 mm/s of displacement control. Finite element analysis predicted that the DCDC specimens would show at least 4.3 fold delayed crack initiation time than conventional tensile fracture specimens under a constant loading speed. Using DCDC specimens, we were able to observe the in-situ crack propagation process in a particle reinforced transparent polymer composite. Our results confirmed that the DCDC specimen would be a good candidate for the in-situ observation of the behavior of particle reinforced composites with slow crack velocity, such as the self-healing process of micro-particle reinforced composites.

• 한국추진공학회지
• /
• 제7권4호
• /
• pp.27-32
• /
• 2003

초소형 정적 연소기의 연소 성능에 대한 실험을 수행하였다. 연소기 형상과 크기의 영향을 알아보기 위해 몇 가지 형태의 연소기를 제작하였다. 연소기는 납작한 원통형 정적 연소기로써 연소기의 지름이 15mm인 경우에 대해서 높이가 1mm, 2mm, 3mm인 것을 제작하였고, 지름의 영향을 알아보기 위해서 연소기의 높이와 지름이 각각 2mm 와 7.5mm 인 것을 제작하였다. 사용된 연료는 당량비 1인 메탄과 공기의 혼합기체와 당량비 1과 2인 수소와 공기 혼합 기체이다 실험을 통하여 연소중의 압력 변화를 측정하였다. 최대 압력은 연소기의 높이와 초기 압력이 증가할수록 증가하였다 화염의 전파를 쉴리렌 방법을 이용하여 가시화를 하였다. 열손실의 영향을 극복하고 화염의 전파가 가능하게 하는 초기 압력을 제시하였다.

• 한국지반공학회논문집
• /
• 제19권2호
• /
• pp.171-178
• /
• 2003

날개크랙과 이차크랙은 암석의 일축압축 및 이축압축 조건에서 관측되는 특정한 형태의 크랙이다. 본 연구에서는 석고로 제작된 실험체내에 발생하는 날개크랙과 이차크랙의 형태적 측면을 미시적 및 거시적 관점에서 관측하였다. 날개크랙의 진행방향을 따라 미소인장크랙이 관측되었으며 미소인장크랙은 공극간의 연결과 분지현상을 통하여 진전되었다. 날개크랙의 개시점에서 다중의 미소인장크랙의 개시가 관측되었으며 미소인장크랙은 굴곡진 진행을 보인다. 또한 이차크랙과는 달리 미소인장크랙은 상대적으로 일정한 크랙의 틈을 보이며 인장에 의한 할렬파괴에 의해 진행되는 것으로 나타났다. 이차크랙의 미시적 관측에서는 미소파쇄대가 관측되었다. 이차크랙의 파괴구간 내에서는 입자 및 집괴의 분리, 경사진 미소파쇄대의 형성 및 불규칙한 크기의 틈을 가진 미소파쇄대가 관측되었다. 이러한 결과는 이차크랙이 전단에 의해 형성됨을 보이고 있다 날개크랙과 이차크랙은 서로 다른 크기의 파괴진행구간을 보이고 있으며 각각의 크랙의 진행 방향에 직각방향으로 측정된 파괴진행구간의 폭은 날개크랙의 경우 10$\mu{m}$에서 20$\mu{m}$ 정도이며 이차크랙은 100$\mu{m}$에서 200$\mu{m}$ 정도이다.