• 한국광학회:학술대회논문집
• /
• 한국광학회 2007년도 동계학술발표회 논문집
• /
• pp.265-266
• /
• 2007

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2005년도 춘계학술대회 논문집
• /
• pp.216-219
• /
• 2005

In recent, LCD becomes one of the main display devices and expected to have quite good market share during the next couple of years. The demand for low cost and high performance, however, is becoming severe as the competition among other display devices like PDP, OLED increases. To satisfy this demand from market, we need to optimize the parts or modules of the LCD, reduce the number of the assemble and enhance the process for the high brightness and uniformity of the LCD. The LCD consists mainly of LCD panel and Backlight unit(BLU). BLU, which takes big portion of the cost for LCD, consists of light source, light guide panel and many kinds of functional film. Recently light guide panel or film for BLU has micro patterns on its surface and consequently to reduce the number of parts and enhace the brightness and its uniformity. In this study, some methodologies for the fabrication of the master/stamper and molding the light quide panel are introduced for 50um pitch of prizm patterned substrate. Mechanical machining process is adapted and optimized to fabricate micro patterned stamper using the micro cutting tool. Injection molding technology is also developed to obtain uniformly replicated micro patterned products.

• 반도체디스플레이기술학회지
• /
• 제9권1호
• /
• pp.17-21
• /
• 2010

Currently miniaturized electron-optical columns find their way into electron beam lithography systems. For better lithography process, it is required to make smaller spot size and longer working distance. But, the micro-columns of the multi-beam lithography system suffer from chromatic and spherical aberration, even when the electron beam is exactly on the symmetric axis of the micro-column. The off-axis error of the electron emitting source is expected to become worse with increasing off-axis distance of the focusing spot. Especially the electron beams far from the system optical axis have a non-negligible asymmetric intensity distribution in the micro-column. In this paper, the effect of the off-axis e-beam source is analyzed. To analyze this effect is to introduce a micro-column model of which the e-beam emitting source is aligned with the center of the electron beam by shifting them perpendicular to the system optical axis. The presented solution can be used to analysis the performance of the multi-electron-beam system. The performance parameters, such as the working distances and the focusing position are obtained by the computational simulations as a function of the off-axis distance of the emitting source.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2008년도 International Meeting on Information Display
• /
• pp.523-525
• /
• 2008

Inkjet printing is being considered as an alternative to the conventional lithography in the electronic industry. Surface energy control of substrate is a critical issue in controlling the dimension of microstructures by the inkjet printing. This study introduces the surface energy control of ITO substrate for in/q'et printing of PEDOT/PSS.

• 한국산학기술학회논문지
• /
• 제16권9호
• /
• pp.6227-6235
• /
• 2015

HUD는 투시형 정보 전시장치로서 최근에 마이크로 디스플레이와 LED 기술의 발달로 소형화가 이루어져 점차 응용분야를 넓혀가고 있다. 본 논문에서는 마이크로 디스플레이 장치인 DLP를 이용하여 영상 전시영역 5인치 급의 양안 관측용 소형 헤드업 디스플레이(HUD) 광학계를 설계하였다. 소형 경량화된 HUD를 설계하기 위하여 광학계의 각 설계요소를 분석하였고 DLP, 프로젝젼 광학계 및 오목렌즈형 영상결합기의 특성들과 설계방식을 살펴보았다. 각 광학계의 연결구조 분석을 통하여 세부 설계사양을 설정하고 광학계를 상세 설계하였다. 프로젝션 광학계와 오목렌즈형 영상결합기 사이에 백색 확산 반사체를 넣어 접은 형태로 구성하여 광학계를 각각 독립적으로 설계하였다. 투사 영상의 전시거리는 약 2m ~ 무한대 까지 조정이 가능하고 관측거리는 1m로 설정하였다. 해상도는 HD($1,280{\times}720$ 화소) 급으로 1 ~ 2화소 까지 인식이 가능하여 각종 문자, 기호를 판독할 수 있다. 또한, 컬러영상 구현이 가능하여 네비게이션 지도, 주간카메라 영상 및 열상카메라 영상 등을 전시할 수 있다.

• 한국광학회지
• /
• 제17권3호
• /
• pp.240-247
• /
• 2006

본논문에서는 LCOS형 마이크로 디스플레이를 이용하여 60인치 이상의 대화면에서도 고해상도 및 슬림형이 가능한 프로젝션 TV용 광학계를 설계하였다. 조명광학계, 투사광학계, 색분리 합성계 그리고 마이크로 디스플레이 사이의 상호관계를 정량화하여 최적의 광학엔진을 구현하기 위한 초기데이터를 설정하고, 이로부터 최적화 과정을 통하여 각각의 광학계를 설계하였다. 고휘도를 구현하기 위한 3-panel 방식을 도입하고, 4개의 프리즘을 대칭적으로 배열하여 RGB의 광경로가 동일하도록 색분리 합성계를 구성하여 조명광학계를 컴팩트하게 설정하였다. 또한 투사광학계의 렌즈 군 사이에 거울을 삽입하여 접은 형태로 구성하여 고해상도 및 슬림형이 가능한 광학엔진을 설계하였다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1992년도 하계학술대회 논문집 B
• /
• pp.911-914
• /
• 1992

We have investigated the micro-discharge in plasma display panel using 2 dimensional 2 fluid MHD equations. Plasma display utilizes the physical phenomena of the normal glow or abnormal glow and is considered to be able to provide the largest display area among various flat panel. 2 fluid, 2 dimensional Magneto-Hydro-Dynamic equations are applied to Computational field of 100${\times}$800${\mu}m^2$. Time varing glows and after-glows were investigated for 11 $\mu$sec. We obtained the distribution of the microscopic variables such as the density, temperature, velocity of Ne+Ar0.1% gas plasma. During the first 6$\mu$ sec, glow discharge dued to DC pulse was investigated. Time varing phenomena of after-glow was also investigated during the last 5 $\mu$set. From results, it was found that the driving efficiency of a DC Plasma Display Panel could be improved when the diffusion of ions and electrons are controlled by the pulses applied to the auxiliary anode.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2007년도 춘계학술대회 논문집
• /
• pp.55-59
• /
• 2007

Technologies of super-precision micro pattern mold machining and high-performance optical films manufacturing using thereof forms the basis of recent display industries which have developed remarkably. Especially, it is the light guide plates and high luminous intensity prism sheets at BLU or FLU in LCD and lenses at virtual keyboard's display to be manufactured by micro machining technology. One way the industry requires to do that is by developing high-performance light guide plates or films which are existing light guide plates, diffusion films and luminance enhancement prism films all in one. In this research effort, basic processing of the micro pyramid structure by shaping method is proposed. Experiments of mold machining of pitch $20{\mu}m$ tetrahedral pyramid and pitch $100{\mu}m$ trihedral pyramid using a $90^{\circ}$ diamond tool were conducted to identify a variety of machining features, such as cutting forces, conditions of the surface, shapes of chips, and influence of materials.

• Korea-Australia Rheology Journal
• /
• 제19권3호
• /
• pp.171-176
• /
• 2007

LCD-BLU (Liquid Crystal Display-Back Light Unit) of medium size is usually manufactured by forming numerous dots with $50{\sim}300\;{\mu}m$ in diameter by etching process and V-grove shape with $50\;{\mu}m$ in height by mechanical cutting process. However, the surface of the etched dots is very rough due to the characteristics of the etching process and V-cutting needs rather high cost. Instead of existing optical pattern made by etching and mechanical cutting, 3-dimensional continuous micro-lens of $200\;{\mu}m$ in diameter was applied in the present study. The continuous micro-lens pattern fabricated by modified LIGA with thermal reflow process was tested to this new optical design of LGP. The manufacturing process using LIGA-reflow is made up of three stages as follows: (i) the stage of lithography, (ii) the stage of thermal reflow process and (iii) the stage of electroplating. The continuous micro-lens patterned LGP was fabricated with injection molding and its test results showed the possibility of commercial use in the future.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2007년도 7th International Meeting on Information Display 제7권2호
• /
• pp.1753-1756
• /
• 2007

In the field of 3D display, holographic displays are the only technology allowing optimal user comfort. We have developed systems based on compact projection optics, that allow advantageous new features, like large size full-color3D scenes generated at high rate on a micro-display with state of the art resolution.