• Journal of Pharmacopuncture
• /
• v.23 no.4
• /
• pp.237-246
• /
• 2020

Objectives: Capsaicin-containing (CP) pharmacopuncture was developed to treat neuropathic pain. This study was conducted to assess the toxicity of CP extract for pharmacopuncture, using a micronucleus test. Methods: First, a dose range finding study was conducted. Then an in vivo micronucleus test was performed to determine the induction of micronuclei in mouse bone marrow cells after intramuscular administration of CP twice with a 24-hour interval to 8-week-old ICR mice. A high dose of 0.2 mL/animal was selected, and this was sequentially diluted by applying a geometric ratio of 2 to produce two lower dose levels (0.1 and 0.05 mL/animal). In addition, negative and positive control groups were set up, and an HPLC analysis was conducted to confirm the capsaicin content of CP. Results: The incidence of micro-nucleated polychromatic erythrocytes in polychromatic erythrocytes in the CP-treated group was similar to that in the negative-control group, while that in the positive-control group was significantly greater. In addition, the ratio of polychromatic erythrocytes to total erythrocytes in the CP treatment group and the positive control group was not significantly different from the negative control group. In the HPLC analysis, capsaicin in the CP was identified through a comparison with the retention time of the capsaicin standard of 27 min. Conclusion: CP did not show any indication of any potential to induce micronuclei formation in bone marrow cells of ICR mice under the conditions of this study. Further toxicity studies are necessary to ensure the safety of the use of CP in clinical practice.

• Journal of Powder Materials
• /
• v.29 no.3
• /
• pp.219-225
• /
• 2022

An alternative fabrication method for carburizing steel using spark plasma sintering (SPS) is investigated. The sintered carburized sample, which exhibits surface modification effects such as carburizing, sintered Fe, and sintered Fe-0.8 wt.%C alloys, is fabricated using SPS. X-ray diffraction and micro Vickers tests are employed to confirm the phase and properties. Finite element analysis is performed to evaluate the change in hardness and analyze the carbon content and residual stress of the carburized sample. The change in the hardness of the carburized sample has the same tendency to predict hardness. The difference in hardness between the carburized sample and the predicted value is also discussed. The carburized sample exhibits a compressive residual stress at the surface. These results indicate that the carburized sample experiences a surface modification effect without carburization. Field emission scanning electron microscopy is employed to verify the change in phase. A novel fabrication method for altering the carburization is successfully proposed. We expect this fabrication method to solve the problems associated with carburization.

• Korean Journal of Materials Research
• /
• v.31 no.12
• /
• pp.704-709
• /
• 2021

In the flux used in the batch galvanizing process, the effect of the component ratio of NH₄Cl to ZnCl₂ on the microstructure, coating adhesion, and corrosion resistance of Zn-Mg-Al ternary alloy-coated steel is evaluated. Many defects such as cracks and bare spots are formed inside the Zn-Mg-Al coating layer during treatment with the flux composition generally used for Zn coating. Deterioration of the coating property is due to the formation of AlCl_x mixture generated by the reaction of Al element and chloride in the flux. The coatability of the Zn-Mg-Al alloy coating is improved by increasing the content of ZnCl₂ in the flux to reduce the amount of chlorine reacting with Al while maintaining the flux effect and the coating adhesion is improved as the component ratio of NH₄Cl to ZnCl₂ decreases. Zn-Mg-Al alloy-coated steel products treated with the optimized flux composition of NH₄Cl·3ZnCl₂ show superior corrosion resistance compared to Zn-coated steel products, even with a coating weight of 60 %.

• Journal of the Korean GEO-environmental Society
• /
• v.22 no.12
• /
• pp.59-63
• /
• 2021

This study presented the characteristics and additive effects of the grout with mixing ratio for developing of high-efficiency grouting technology under high depth conditions. The laboratory investigation were conducted with Portland cement (OPC) and micro cement (S8000-E) including viscosity experiments, particle size analysis experiments, Gel-Time experiments and uniaxial compressive strength experiments. As a result of the viscosity experiment, it was shown that OPC is advantageous in terms of viscosity, but S8000-E is suitable when considering the passage of rock joint intervals through particle size analysis. The Gel-Time experiment shows that it is not that difficult with injection as a grout material even when silica fume (SF) was applied. The strength of the cured material is improved as increase in the content of silica fium (SF). Within the range of the study, the optimal mixing ratio obtained through various experiments is S8000-E, w/c=70%, silica fium (SF)=6%, and 7 days.

• Journal of Adhesion and Interface
• /
• v.23 no.3
• /
• pp.94-99
• /
• 2022

Ternary phased graphene/silica/EVOH nanocomposite coating materials were prepared via sol-gel process and solution blending process. From both SEM observations and XRD analysis, the exfoliated structure and dispersion state of graphene nanosheets and silica particles in the nanocomposites as well as the intercalated and exfoliated structure of the prepared graphene oxide were confirmed. The incorporation of GrO and silica at appropriate content resulted in remarkable improvement in oxygen barrier property of the ternary phased nanocompoiste-coated BOPP films, compared with that of binary(silica/EVOH) phased nanocomposite coating films, however, at excess amount of GrO and silica, very slight variation was observed due to incomplete exfoliation, dispersion of graphene tactoids, and formation of micro cracks in the silica clusters. In addition, the transparency of nanocomposite-coated film was investigated by measuring the light transmittance as a function of GrO contents, suggesting the possibility for the application of food packaging films.

• Nuclear Engineering and Technology
• /
• v.53 no.6
• /
• pp.2000-2010
• /
• 2021

Mechanical moduli, such as Young's modulus (E), Bulks modulus (B), Shear modulus (S), longitudinal modulus (L), Poisson's ratio (σ) and micro Hardness (H) were theoretically calculated for (100-x)TeO₂+x MgO glasses, where x = 10, 20, 30, 40 and 45 mol%, based on the Makishima-Mackenzie model. The estimated results showed that the mechanical moduli and the microhardness of the glasses were improved with the increase of the MgO contents in the TM glasses, while Poisson's ratio decreased with the increase in MgO content. Moreover, the radiation shielding capacity was evaluated for the studied TM glasses. Thus, the linear attenuation coefficient (LAC), mass attenuation coefficient (MAC), transmission factor (TF) and half-value thickness (𝚫_0.5) were simulated for gamma photon energies between 0.344 and 1.406 MeV. The simulated results showed that glass TM10 with 10 mol % MgO possess the highest LAC and varied in the range between 0.259 and 0.711 cm^-1, while TM45 glass with 45 mol % MgO possess the lowest LAC and vary in the range between 0.223 and 0.587 cm^-1 at gamma photon energies between 0.344 and 1.406 MeV. Furthermore, the BXCOM program was applied to calculate the effective atomic number (Z_eff), equivalent atomic number (Z_eq) and buildup factors (EBF and EABF) of the glasses. The effective removal cross-section for the fast neutrons (ERCSFN, ∑_R) was also calculated theoretically. The received data depicts that the lowest ∑_R was achieved for TM10 glasses, where ∑_R = 0.0193 cm² g^-1, while TM45 possesses the highest ERCSFN where ∑_R = 0.0215 cm² g^-1.

• Journal of Korean Medical classics
• /
• v.37 no.2
• /
• pp.77-99
• /
• 2024

Objectives : This study examined the possibility of therapeutic application of natural pigments in the Joseon Period other than aesthetic purposes. Methods : The medicinal properties of natural pigments as written in the texts Sangayorok, Gyuhapchongseo, Imwongyeongjeji were searched and analyzed in the texts Bencaogangmu, Encyclopedia of Eastern Medicine, and the Encyclopedia of Chinese Medicinals focusing on their Qi, flavor, effects and application. Of the conditions they treated, we examined whether they treated skin conditions using external application. The Korean Medical effects of these pigments were examined based on the content of the skin chapter of the Donguibogam. Results : We were able to extract 47 kinds of natural pigments, most of which had cold nature and bitter tasting properties. In addition, most of the pigments had the effect of treating skin conditions, illnesses due to micro-organisms, and of detoxifying. Conclusions : After consideration of medicinal properties and effects of the herbs that were used as pigments in the Joseon period, it could be concluded that as these herbs not only function as pigments but also hold properties that prevent skin conditions, their therapeutic functions could have been considered when using them as pigments.

• The Korean Journal of Rheology
• /
• v.11 no.1
• /
• pp.34-43
• /
• 1999

Flow-induced voids during resin impregnation and poor fiber wetting have known to be highly detrimental to the performance of composite parts manufactured by resin transfer molding(RTM) process. In this study, in order to overcome these serious problems encountered in RTM, the effects of surface modification by using silane coupling agent as a surface modifier on the flow characteristics, the wetting between resin and fiber, and void content were investigated. For the experiments of microscopic flow visualization and curing in a beam mold, glass fiber mats having plain weaving structure and epoxy resin were used. Modifying the fiber surface was found to result in a significant decrease of dynamic contact angle between resin and fiber and increase of wicking rate. Therefore, it was confirmed that the surface modification employed in this study could improve the wettability of reinforcing fibers as well as micro flow behavior. In addition, It was revealed that high temperature and low penetration rate of the resin are more favorable processing conditions to reduce the dynamic contact angle. However, surface modified fiber mat was found to have lower permeability than the unmodified one, which may be explained in terms of the decrease of contact time between resin and fiber owing to improvement of wetting. It was also exhibited that surface modification had a significant influence on void formation in RTM process, resulting in a decrease of overall void content due to the improvement of wetting in cured composite parts.

• Journal of Aquaculture
• /
• v.3 no.2
• /
• pp.155-165
• /
• 1990

The albinic phenomenon of flat-fish (Paralichthys olivaceus) was investigated by measuring protein content, tyrosinase activity, amino acid composition, and contents of vitamin A and C. These materials in the flat-fish feed-stuff were also tested. The amount of skin protein was higher than that of muscle in normal flat-fish. Catechol and L-dopa oxidase activity did not differ between normal and albinic flat-fish. The free amino acid of skin in normal flat-fish was 7.5 times that in albinic one. Sulfur-containing amino acid in normal flat-fish was also 6.3 times that in albinic ones. Vitamin A was not detected in both of flat-fish. The content of vitamin C in normal flat-fish was 7.8 times that in albinic one. The contents of protein, sulfur-containing amino acid and vitamin C in micro-encapsulated feed (one commercial feed in Japan) were the highest among the feed-stuff used in this experiment. The melanin formation of flat-fish skin was affected by substrates such as aromatic amino acid and cofactor such as sulfur amino acid.

• Journal of Aquaculture
• /
• v.19 no.4
• /
• pp.225-230
• /
• 2006

A long-term (26 weeks) feeding experiment was conducted to examine the essentiality and requirement of inositol in diets for olive flounder because no information is available in the species. Five casein-gelatin based semi-purified diets were formulated to contain four different levels of myo-inositol (0, 0+antibiotic, 400, 800, and 1600 mg/kg, designated as M0, M0+, M400, M800, and M1600, respectively). One (M0+) of the control diets contained tetracycline hydrochloride (0.4%, wt/wt) as an antibiotic to inhibit biosynthesis of inositol by micro-organism in intestine of fish. Olive flounder at the early juvenile stage (initial body weight 1.22 g) were randomly distributed into fifteen 35 L tanks (48 fish/tank) and fed with one of the experimental diets (3 replicates per diet). At the end of the feeding trial, the weight gain, feed intake, specific growth rate, and protein efficiency ratio of fish fed diets containing higher levels of myo-inositol (M800 & M1600) were significantly higher than those of fish fed the other diets (P<0.05). Feed conversion ratio, survival, hematocrits, and hemoglobin of fish fed experimental diets were not significantly different among all the fish groups. Whole body compositions of fish were not different except for lipid content. The lipid content was significantly different between M0 and M400 diet groups. These results indicate that juvenile olive flounder requires dietary supplementation of myo-inositol in diets for normal growth and its optimum level seems to be approximately 800 mg myo-inositol/kg diet.