• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2001년도 가을 학술발표회 논문집
• /
• pp.73-78
• /
• 2001

Portland cement concrete is made with coarse aggregate, fine aggregate, portland cement, water and, in some cases, selected chemical admixtures such as air-entraining agents, water reducer, superplasticizer, and so on, and mineral admixtures such as fly ash, silica fume, slags, etc. Typically, in the concrete, the coarse aggregate and fine aggregate will occupy approximately 80 percent of the total volume of the final mix. Therefore, the coarse and fine aggregates affect to the properties of the portland cement concrete. As the natural sands are drained, it is necessary and economical to utilize crushed sands(manufactured fine aggregate). It is reported that crushed sands differ from natural sands in gradation, particle shape and texture, and the micro fines in the crushed sands affect to the quality of the portland cement concrete. Therefore, the purpose of this paper is to investigate the characteristics of fresh and hardened concrete with high content of micro fines. This study provides firm data for the use of crushed sands with higher micro fines.

• KIEAE Journal
• /
• 제11권4호
• /
• pp.95-101
• /
• 2011

Earth has been used as a building material not only our country but also many foreign countries in the world. In foreign countries, we can often find the high-storied earthen houses which have been maintained for over several hundred years, which means the fact that earth differs in durability according to the methods of utilizing earth. So, the purpose of this study is to progress the fundamental research for utilizing earth as a wall material. Also, the another purpose of this study is to utilize the optimum micro-filler effect which adjusts the grain size of earth and the lime composite which promotes chemical combining power, and so examine whether earth material ensures its high compressive strength. This study applied both of rammed earth method and pour earth method among earth architecture methods. This study investigated compressive strength, slump, and air content according to unit binder weight. On the basis of such experimental results, this study derived the following conclusions. 1) Optimum micro-filler mixtures reduce a lot of fine particles contained in earth. If optimum micro-filler mixtures are used as aggregates, they develop lower W/B and relatively higher strength than general earth. 2) In this study, which uses optimum micro-filler earth mixtures and lime composite, rammed earth method develops 29MPa and pour earth method develops 28MPa in 28 days compressive strength. Such strengths can be utilized in building walls.

• The Journal of Asian Finance, Economics and Business
• /
• 제7권8호
• /
• pp.445-450
• /
• 2020

This research investigates the role of entrepreneurial leadership in micro-enterprise development in the district of Majalengka in West Java, Indonesia. This study applied a qualitative content analysis method to understand the phenomenon of micro-enterprises comprehensively. The data of this research was collected using surveys, interviews, and a group discussion. The findings indicated that technological information adaptation plays a crucial role in the development of micro-enterprise development. Since the group of millennials dominated the leadership, it has provided more creativity by implementing technological information instead of the previous generation that faced difficulties in adopting the technology. This study noted that inadequate technology adaptation makes micro-business gradually lose customers, and the business was threatened to close. Meanwhile, the role of leadership drives the business development, sales have risen, the number of products has been increasingly diverse, and business capital and number of employees have grown. The establishment of an entrepreneur group could facilitate peer-to-peer contact, knowledge transfer, training, and intervention to enhance leadership and business development. This finding pointed out that the leadership will successfully influence business development when supported by several characteristics such as manage the business, capture opportunities, confidence, firmness, personal integrity, communication, and social and technical expertise.

• 전기학회논문지
• /
• 제67권9호
• /
• pp.1181-1188
• /
• 2018

In order to develop new insulating materials for GIS Spacer using environmentally friendly insulating gas, three kinds of dispersed liquid nano composites of solid epoxy /nano layered silicate filled material were prepared. And the epoxy/nano/micro silica composite was prepared by mixing epoxy/nano 3 phr dispersion/4 kinds of filler contents(40,50,60, 70wt%). The electrical insulation breakdown strengths of the nano and nano/micro mixed composites were evaluated by using 8 kinds of samples including the original epoxy. The mechanical tensile strength of the epoxy / nano / micro silica composite were evaluated, also. The TEM was measured to evaluate the internal structure of nano/micro composites. As a result, it was confirmed that the layered silicate nano particles was exfoliated through the process of inserting epoxy resin between silicate layers and the layers. In addition, dispersion of nano / micro silica resulted in improvement of electrical insulation breakdown strength with increase of filling amount of dense tissue with nanoparticles inserted between microparticles. In addition, the tensile strength showed a similar tendency, and as the content of microsilica filler increased, the mechanical improvement was further increased.

• Fisheries and Aquatic Sciences
• /
• 제4권2호
• /
• pp.75-83
• /
• 2001

This study is to investigate biochemical compositions of two species of marine microalgae, Chlorella ellipsoidea of Chlorophyta and Tetraselmis suecica of Prasinophyta, and to assess their potential antimicrobial activities. Crude protein, lipid and carbohydrate for C. ellipsoidea were $43.15\%$, $12.63\%$ and $13.09\%$, respectively, and those for T. suecica were $44.95\%$, $4.80\%$ and $24.05\%$, respectively. The major amino acids of the two micro algae were aspartic acid, glutamic acid, glycine, alanine, valine, leucine, lysine and proline, and no significant difference between the amino acid compositions of both micro algae was observed. The major sugars for both microalgae were glucose, galactose and mannose, and glucose contents showed the highest level, $58.70\%$ for C. ellipsoidea and$57.86\%$ for T. suecica. The major mineral contents of both micro algae for 100g were Ca (3,114mg in C. ellipoidea and 3,389mg in T. suecica) and followed by Na (2,881mg), K (548mg) and Mg (545mg) for C. ellipsoidea and Na (1,832 mg), Mg (1,510mg) and K (548mg) for T. suecica. In the content of ATP-related compound, hypoxanthine in C. ellipsoidea and IMP in T. suecica were absolutely dominant compounds. The highest content of fatty acid in C. ellipsoidea was 20:4, $27.15\%$ and that in T. suecica was 18:3 (w-6), $18.10\%$. In case of physiologically important polyunsaturated fatty acids like eicosapentaenoic acid (20: 5) and docosahexaenoic acid (22: 6), both microalgae possessed just trace amounts but was rich in arachidonic acid (20: 4). Vitamin content in both microalgae was significantly high in choline and inositol. In antimicrobial activity by water- and fat-soluble fraction of the micro algae, hexane extract in the fat-soluble fraction of C. elliposidea inhibited the growth of Bacillus subtilis by $96\%$ bactericidal activity and tetrachlorocarbon extract of T. suecica indicated relatively excellent antimicrobial activity $(81\%\;bactericidal\;activity)$ against Escherichia coli. Hot water extract among water-soluble fraction of both micro algae almost suppressed the growth of Staphylococcus aureus by $96\%$ bactericidal activity.

• Journal of Korean Society for Atmospheric Environment
• /
• 제22권E2호
• /
• pp.78-88
• /
• 2006

In order to study the characteristics of cloud, a real-scale experiment for cloud generation was carried out using an extinct vertical mine (430 m height) located in the northeastern Honshu, Japan. The dry particles generated from the three-step concentrations of NaCl solutions were used for cloud generation. The number size distributions of initial dry particles and cloud droplets were monitored by Scanning Mobility Particle Sizer (SMPS) and Forward Scattering Spectrometer Probe (FSSP) at bottom and upper sites of pit, respectively. The polymeric water absorbent film (PWAF) method was employed to measure liquid water content ($W_L$) as a function of droplet size. Moreover the chemical properties of individual droplet replicas were determined by micro-PIXE. The CCN number concentration shows the lognormal form in dependence of the particle size, while the number size distributions of droplets are bimodal showing the peaks around $9{\mu}m$ and $20{\mu}m$ for every case. In comparison to background mineral particles, right shifting of size distribution line for NaCl particles was occurred. When NaCl solutions with three-step different concentrations were neulized, $W_L$ shows the strong droplet size dependence. It varied from $10.0mg\;m^{-3}$ up to $13.6mg\;m^{-3}$ with average $11.6mg\;m^{-3}$. A good relationship between $W_L$ and cloud droplet number concentration was obtained. Both chemical inhomogeneities (mixed components with mineral and C1) and homogeneities (only mineral components or C1) in individual droplet replicas were obviously observed from micro-PIXE elemental images.

• 한국표면공학회:학술대회논문집
• /
• 한국표면공학회 2015년도 춘계학술대회 논문집
• /
• pp.171-172
• /
• 2015

$Ni-W-Si_3N_4$ alloy composite coatings were prepared by pulse electro-deposition method using nickel sulfate bath with different contents of tungsten source, $Na_2WO_4.2H_2O$, and dispersed $Si_3N_4$ nano-particles. The structure and micro-structure of coatings was separately analyzed by X-ray diffraction (XRD) and scanning electron microscope (SEM). Results indicated that nano $Si_3N_4$ and W content in alloy had remarkable effect on micro-structure, micro-hardness and scratch resistant properties. Tungsten content in Ni-W and $Ni-W-Si_3N_4$ alloy ranged from 7 to 14 at.%. Scratch test results suggest that as compared to Ni-W only, $Ni-W-Si_3N_4$ prepared from Ni/W molar ratio of 1:1.5 dispersed with 20 g/L $Si_3N_4$ has shown the best result among different samples.

• 한국작물학회지
• /
• 제35권5호
• /
• pp.449-463
• /
• 1990

들깨 장려품종과 지방수집재래종 도입종 등을 대상으로 단백질 함량과 아미노산 조성을 분석 조사하여 고단백 양질 다수성 품종육성에 필요한 기초자료를 얻고자 시험을 실시하였던 바 그 결과를 요약하면 다음과 같다. 1. 들깨 유전자원의 단백질 함량은 최저 17.9%에서 최고 28.1%까지 10.2%의 변이폭을 보여 주었고 평균 함량은 23.6%였으며 대부분 21-25% 범위에 분포하였다. 본 연구 결과 단백질 함량이 높은 남지종, 산동종, 은진종 등 7품종을 선발하였다. 2. 단백질 함량은 유래별로는 전남지역에서 수집된 품종이 가장 높았고 숙기에 따라서는 차이가 없었으며, 종파색은 은회색이, 1,000립중은 무거운 대립종에서 높은 경향이었다. 3. 단백질 함량과 임실율은 유의적인 부의 상관을 보였고 단백질 함량과 기름함량은 유의적인 정의 상관을 보였으며 단백질 함량과 1,000 립중간에는 정의 상관을 보였으나 유의성은 인정되지 않았다. 4. Micro-kjeldahl법과 비교한 NIR법의 단백질 calibration 정밀도는 0.27%였다. 5. 들깨 95품종을 대상으로 micro-kjeldahl법과 NIR 분석법에 의한 단백질 함량 차이는 유의성이 보이지 않았으며 표준편차 차이는 0.34%를 보여 주었고, 분석방법간에 고도의 정상관이 인정되었다. 6. 엽실들깨등 4품종의 아미노산 조성은 FAO권장량보다 높아 그 우수성이 인정되었으며 필수아미노산에서 총량은 품종간에 차이가 크지 않았으나 lysine과 methionine은 다소 차이가 있었다. 7. 들깨의 주요 아미노산은 glutamic acid와 arginine아었다.

• 한국주조공학회지
• /
• 제33권6호
• /
• pp.233-241
• /
• 2013

Effect of Fe and Mn contents on the castability of Al-9wt%Si-xMg-yFe-zMn alloy has been studied. The alloy was composed of ${\alpha}$-Al phase, Al+eutectic Si phase, ${\beta}$-Al5FeSi compound and chinese script ${\alpha}$-$Al_{15}(Mn,Fe)_3Si_2$ compound. ${\beta}$-$Al_5FeSi$ and ${\alpha}$-$Al_{15}(Mn,Fe)_3Si_2$ compounds assumed to effect the fluidity and shrinkage behaviors of the alloy during solidification due to the crystallization of ${\alpha}$-$Al_{15}(Fe,Mn)_3Si_2$ and ${\beta}$-$Al_5FeSi$ compounds above eutectic temperature. As Fe and Mn contents of Al-9wt%Si-0.3wt%Mg system alloy increased from 0.15wt% to 0.6wt% and from 0.3wt% to 0.7wt%, fluidity of the alloy decreased by 5.7% and 3.3%, respectively. And as Mg content of Al-9wt%Si-0.45wt%Fe-0.5wt%Mn system alloy increased from 0.3wt% to 0.4wt%, fluidity of the alloy decreased by 8.6%. When Fe content of the alloy increased from 0.15wt% to 0.6wt%, macro shrinkage ratio decreased from 6.1% to 4.1%, and micro shrinkage ratio increased from 0.04% to 0.24%. Similarly, Mn content of the alloy increased from 0.3wt% to 0.7wt%, macro shrinkage ratio decreased from 6.0% to 4.5% and micro shrinkage ratio increased from 0.12% to 0.18%. Judging from the castability of the alloy, Al-9wt%Si-0.3wt%Mg alloy with low content of Fe and Mn, 0.1wt% Fe and 0.3wt% Mn, is recommendable.

• 전기학회논문지
• /
• 제67권10호
• /
• pp.1330-1337
• /
• 2018

In this study, 40, 50, 60, and 70 wt% filler dispersed samples were prepared for the current GIS Spacer or environmentally friendly GIS. In the AC electrical breakdown, EMSC and EMAC decreased with increasing filler content, and EMSC showed better breakdown strength than EMAC. The mechanical properties such as tensile strength and flexural strength of EMSC and EMAC were also increased with increasing filler content. In addition, EMSC results in better mechanical properties than EMAC. The reason for this is considered to be one in which the influence of the interface is important.