• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 한국표면공학회 2016년도 추계학술대회 논문집
• /
• pp.116.1-116.1
• /
• 2016

반도체 가스센서에서는 가연성 및 탄화수소계 가스를 감지 하기 위해서 $100{\sim}500^{\circ}C$ 이상의 동작온도를 필요로 한며, 이에 따라 반도체식 가스센서의 마이크로 히터 소재는 고온에서 열적 안정성이 있는 소재가 요구된다. 현재 상용화되고 있는 반도체식 가스센서는 실리콘(Silicon) 기반의 MEMS 기술을 이용한 가스센서이며, 구조적으로나 성능적 한계가 드러남에 따라 실리콘 이외의 다양한 재료의 MEMS 응용기술 개발이 필요한 실정이다. 본 연구에서는 이러한 실리콘의 재료적 한계를 극복하기 위해 다공성 알루미늄 산화물(AAO)을 기판으로 사용하여 마이크로 히터를 제작하였다. AAO의 제작에 앞서 CMP, 화학연마, 전해연마를 이용하여 적합한 전처리 공정을 선정하였고, AAO 제작 시 온도, 시간, 전압의 변수를 주어 마이크로 히터 기판에 적합한 공정을 탐색하였다. 마이크로 플랫폼은 MEMS 공정으로 제작되었으며, PR(Photo Resist)을 LPR(Liquid Photo Resist)과 DFR(Dry Film Resist)로 각각 2종 씩 선택하여 AAO에 적합한 제품을 선정하였다. 제작된 마이크로 히터는 $1.8mm{\times}1,8mm$로 소형화 하였고, 열손실의 제어를 위해 열확산 방지층을 추가하였다. 구동 온도, 소비전력, 장시간 구동시 안정성의 측정 및 평가는 적외선 열화상 카메라와 kiethly 2420 source meter를 이용하여 측정하였으며, 열확산 방지층의 유 무에 따른 온도 분포 및 소비전력을 비교평가 하였다. 최종적으로는 현재 사용화 되어있는 가스센서들의 소비전력과 비교 평가 하여 논의 하였다.

• Journal of the Korean Society of Food Science and Nutrition
• /
• 제15권3호
• /
• pp.306-312
• /
• 1986

Demonstration of the highly positive correlation between blood cholestrol levels and heart disease has made consumers wary of the fats in meat, milk and eggs. The egg, as perhaps the single largest common source of cholesterol, has been cited by many members of the medical and scientific world as a food contributing to heart disease. In light of decreasing per capita egg consumption and continuing dietary egg cholesterol controversy, many researchers have focused their efforts on egg nutrition. The results reported, however, are often contradictory. In spite of the disputable scientific evidence, the egg has been labelled (erroneously) as a highly cholesterogenic food. The objective of this presentation is to present a general picture of the problem and discuss our laboratory findings relevant to the problem. An isotope technique was utilized to incorporate $^{14}C$-cholesterol into egg yolk lipoproteins and study the metabolic fate of dietary ovo-cholesterol in rats. Two hundred and fifty micro-curies of 4-$^{14}C$-cholesterol, emulsified in corn oil, were orally administered to five Single Comb White Leghorn laying hens. Eggs were collected, hard-boiled, and the hot dried egg yolk powder (HEY) was prepared. Total radioactivity excreted via feces was determined. The rat groups fed egg yolk powder excreted more than 95% of the ingested ovo-cholesterol, whereas the rat chow group excreted only 47%. No difference was observed between HEY and CEY treatments. Therefore, an unknown lipid factor present in egg folk accelerates cholesterol turnover rate and excretion via feces.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 한국전기전자재료학회 2008년도 하계학술대회 논문집 Vol.9
• /
• pp.119-120
• /
• 2008

ILD CMP process has been well accepted for the planarization of the dielectric oxide film and becomes a critical process in ULSI manufacturing due to the rapid shrinkage of the design rule for the device. In total manufacturing process steps for a device, the proportion of ILD CMP process has been gradually increased. Ever since ILD CMP has been introduced, the scratches have been a major defects on polished surfaces which cause the electrical shorts between vias or metal lines [1,2]. It was reported that micro-scratches are caused by large, irregularly shaped particles during CMP process. Therefore, most of the CMP users have used < 5 m POU filter to remove and reduce the scratch source from the slurry. However, the scratch has always been the biggest concern in ILD polishing whatever preventive actions are taken. Silica and ceria slurries are widely used for ILD CMP process. There are not much differences in generated scratches and their formation mechanism. In this study, the scratches were investigated as a function of polishing conditions with possible explanation on formation mechanism in ILD CMP.

• The Transactions of the Korean Institute of Power Electronics
• /
• 제16권6호
• /
• pp.577-586
• /
• 2011

This paper describes the development of hardware simulator for the operation analysis of DC microgrid. The hardware simulator consists of several distributed power sources such as a wind power generation, solar power and fuel cell, and two energy storages such as a supercapacitor and battery. The main controller which performs a role of energy management and state monitoring is connected with the local controller in each power source and storage through ethernet-based communication link. The developed hardware simulator can be utilized to analyze the performance DC microgrid with practical manner.

• Geomechanics and Engineering
• /
• 제20권3호
• /
• pp.233-241
• /
• 2020

Alkali-silica reaction (ASR) is among one of the most important damaging mechanisms in concrete, depending primarily on aggregates which contain reactive minerals. However, expansion in concrete may not directly relate to the reactive minerals. This study aims to investigate the influence of ASR and the expansion of mortar bars depending on aggregate type containing various components such as quartz, clay minerals (montmorillonite and kaolinite) and micas (muscovite and biotite). In this study, the accelerated mortar bar tests (AMBT) were performed in two conditions (mortar bars in the same and sole NaOH solutions). Petrographic thin section studies, X-ray diffraction (XRD) analysis (Rietveld method), scanning electron microscopy (SEM) and chemical analyses were carried out. This study showed that quartzite bars led to increase in expansion values of mortar bars in diabase-1 and andesite when these were in the same NaOH solution. However, three samples (basalt, quartzite and claystone) were found having ASR expansion based on the AMBT when the special molds were used for each sample. SEM study revealed that samples which exhibit highest expansions according to AMBT had a generally rough surface and acicular microstructures in or around the micro-cracks. Basalt and quartzite showed more variable in major oxides than those of other samples based on the chemical analyses, SEM studies and AMBT. This study revealed that the highest expansions were observed to source not only from reactive aggregates but also from alteration products (silicification, chloritization, sericitization and argillisation), phyllosilicates (muscovite, biotite and vermiculite) and clays (montmorillonite and kaolinite).

• The Bulletin of The Korean Astronomical Society
• /
• 제36권1호
• /
• pp.65.1-65.1
• /
• 2011

We built a simple Adaptive Optics (AO) system at laboratory. This AO system is a step toward developing AO system for astronomical use. In this step, the AO system consists of He-Ne laser as a artificial light source, wavefront sensor, MEMS (Micro electro mechanical system) type deformable mirror and several lenses. MEMS deformable mirror allows the compact system at low cost and the only several mm sized collimated beam. We made Shack-Hartmann wavefront sensor using a lenslet array and a fast frame CCD. Its performance is verified using an artificial phase disturber and noting the movement of spot images by the lenslet array. The frame rate of the driving software is about 70 fps, depending on the control parameters. The characteristics of MEMS deformable mirror was measured which includes the voltage-to-deflection relation, influence function, and cross-talk. The total system is operated under closed-loop control for the artificial phase disturber and the wavefront is found to be compensated successfully.

• The Bulletin of The Korean Astronomical Society
• /
• 제37권2호
• /
• pp.210.1-210.1
• /
• 2012

We report technique used for improved measurement uncertainties for Photon detection efficiency(PDE) of $1mm^2$ single pixel SiPM. It consists of 470nm LED light source, two 2-inch integrating sphere and two NIST calibrated silicon photodiodes that have ${\pm}2.4%$ calibration error. With raytracing simulation of our experimental setup, we predict number of photon into SiPM and measurement uncertainty. For MPPC, Hamamatsu suggested PDE(1600 micro pixel) including crosstalk and afterpulse is 23.5% at 470 nm. By using new low calibration error photodiode and raytracing simulation, our simulation result has ${\pm}3%$ measurement uncertainty. The technical detail of measurement, simulation are presented with the results and implication.

• Proceedings of the KIEE Conference
• /
• 대한전기학회 2006년도 제37회 하계학술대회 논문집 C
• /
• pp.1651-1652
• /
• 2006

In this study, the 2-step methode by ALD equipment was used to improve the characteristics of ZnO thin films used in a piezoelectric layer when the FBAR devices of a SMR type are fabricated. The Height of formed buffer layer was $400{\AA}$ and ZnO thin film of $13600{\AA}$ was deposited by RF sputter on the buffer layer. When ZnO thin films are deposited, deposition conditions such as pressure, injection time of source and purge time were changed variously. The characteristics of piezoelectric layer such as a crystal orientation and micro-structure of deposited ZnO thin films were studied by SEM, AFM and XRD.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• 제23권12호
• /
• pp.210-216
• /
• 2009

Distributed Generation (DG) is predicted to play a important role in electric power system in the near future. insertion of DG system into existing distribution network has great impact on real-time system operation and planning. It is widely accepted that micro turbine generation (MTG) systems are currently attracting lot of attention to meet customers need in the distributed power generation market. In order to investigate the performance of MT generation systems, their efficient modeling is required. This paper presents the modeling and simulation of a MT generation system suitable for stand-alone operation. The system comprises of a permanent magnet synchronous generator driven by a MT. A brief description of the overall system is given, and mathematical models for the MT and permanent magnet synchronous generator are presented. Also, the use of power electronics in conditioning the power output of the generating system is demonstrated. Simulation studies with MATLAB/Simulink have been carried out in stand-alone operation mode of a DG system.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 한국전기전자재료학회 2007년도 추계학술대회 논문집
• /
• pp.197-198
• /
• 2007

We studied the partial discharge detecting by sensing electromagnetic pulse emitted from the partial discharge source in the stator winding of HV Rotating Machine with UWB sensor. In this study, we designed new type of compact low frequency UWB sensor based on micro-strip technology and made experiments of offline dismantled testing compare with the traditional HFCT as a reference sensor in the laboratory. We investigated internal discharge, surface discharge, corona discharge and non-defected state normal stator on pre-made stator winding by using UWB patch sensor.