• Journal of the Korean Society for Precision Engineering
• /
• v.23 no.7 s.184
• /
• pp.39-50
• /
• 2006

Laser heat treatment technologies have been used to improve characteristics of wear and to enhance the fatigue resistance for automotive parts. The bjective of this research work is to investigate the influence of the process parameters, such as power of laser and defocused spot position, on the characteristics of laser heat treatment for the case of SM45C medium carbon steel. CW Nd:YAG laser is selected as the heat source. The optical lens with the elliptical profile is designed to obtain a wide heat treatment area with a uniform hardness. From the results of the experiments, it has been shown that the maximum hardness is approximatly 780 Hv when the power and the travel of laser are 1,095 W and 0.6 m/min, respectively. In addition, the hardening width using the elliptical lens was three time larger than that using the defocusing of laser beam.

• Journal of Surface Science and Engineering
• /
• v.30 no.4
• /
• pp.255-261
• /
• 1997

Thin film batteries can be used as a micro power source for electronic in which minute power is needed. In this study, lithium phosphorous oxynitride(LIPON) thin films were deposited as an eletrolyte for lithium ion batteries using RF magentron sputtering of lithium phosphate in N2. Ti was also added into the LIPON films as a second network former to enhance the ioinc conductivity of the films. The optimum conditions for LIPON film deposition were sought and the electrolyte with the conductivity of $2.5 \times 10^{-6}$S/cm was obtained at the condition of RF power 4.4 W/$\textrm{cm}^2$, process pressure 10 mtorr and pure nitrogen ambience. Furthermore, the conductivity of LIPON films was increased from $2.5 \times 10^{-6}$S/cm to $8.6 \times 10^{-6}$S/cm by the doping of 2.4at.% Ti. It was also found that by adding Ti to LIPON films, Li content was increased and nitrogen content that reported having the cross-linking effect on LIPON films was also increased as confirmed XPS.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2012.11a
• /
• pp.185-185
• /
• 2012

최근 자연모사를 이용한 연구가 다양한 분야에 적용되고 있다. 특히 연 잎의 표면에서 나타나는 초발수 특성이 마이크로 나노 크기의 구조와 표면에너지를 제어하는 에피큐티클 왁스에 기인하다는 것이 밝혀지면서 이를 응용한 연구가 진행되고 있다. 본 연구는 알루미늄 표면처리로 마이크로와 나노 구조물을 형성하고 그 위에 발수 특성을 가진 물질을 증착하여, 발수성을 가지는 표면을 개발하였다. 알루미늄 표면에 마이크로 크기의 알루미나($Al_2O_3$) 분말을 이용한 블라스트(blast) 공정으로 표면에 마이크로 구조를 형성하고, Linear Ion Source(LIS)를 적용한 Ar 이온빔 에칭으로 나노 구조를 형성하였다. FE-SEM 분석을 통해 수~수십 마이크로 구조 위에 나노 크기의 구조가 형성 된 것을 관찰하였다. 마이크로 나노 구조가 형성된 알루미늄의 표면에너지를 낮추기 위해 trimethylsilane(TMS) 및 Ar을 이용한 플라즈마처리로 표면에 기능성 코팅막을 형성하였다. 그 결과 TMS 발수 코팅하기 전에 비해 표면에너지가 $99.75mJ/m^2$에서 $9.05mJ/m^2$으로 급격히 낮아지고 접촉각 값이 $123^{\circ}$로 향상된 것을 확인하였다.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.43 no.5
• /
• pp.489-494
• /
• 2010

The nutritional demand of oyster larva (Crassostrea gigas) were investigated to determine the optimal culture conditions and improve micro-algae utilization. Changes in nutrients and shell growth were examined in fed and 96-h (48 h in late umbone stage) oysters at four larval stages. Shell growth increased significantly in D shape larvae, regardless of feeding variations. No growth was observed in starved larvae, except in shell length of umbone (to 11.9 ${\mu}m$). Fed larvae showed significant growth in all development stages (P < 0.05). During starvation, lipids were most significantly decreased in all larval stages (by 76.8%, 68.3%, 76.3%, and 40.3%, respectively), followed by protein (41.1%, 31.1%, 33.1%, 16.7%) and nitrogen-free extracts (40.8%, 24.3%, 36.9%, 20.1%), Gross energy (kcal/g) consumption in each larval stage was 49.6%, 35.1%, 39.1%, and 20.4%, respectively. Our results indicate that lipids are the most important energy source during the early larval development stages of C. gigas.

• The Bulletin of The Korean Astronomical Society
• /
• v.36 no.2
• /
• pp.132.2-132.2
• /
• 2011

We are developing Adaptive Optics (AO) system for astronomical use. The He-Ne laser works as an artificial light source. The tip-tilt correction servo is added to our AO system. The tip-tilt term, among the Zernike terms, is the biggest contributor of wavefront deformation caused by atmospheric turbulence at small telescopes. The tip-tilt correction servo consists of a Piezo tip-tilt platform with a mirror, a quadrant photodiode as a tip-tilt sensor, and controllers. The Shack-Hartmann wavefront sensor measures the residual wavefront errors and they are corrected by the MEMS (Micro Electro Mechanical System) deformable mirror. The MEMS deformable mirror allows the compact size at low cost compare to adaptive secondary mirror and other deformable mirrors. As the frame rates of the MEMS deformable mirror is about tens of kHz, the frame rates of the detector in wavefront sensor is the bottleneck of the wavefront correction speed. For faster performance, we replaced a CCD which provides frame rates only 70 Hz with a CMOS with frame rates up to 450 Hz.

• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.28A no.9
• /
• pp.721-728
• /
• 1991

In this paper, a magneto-optic modulator has been designed by using single crystal BSO and polycrystal ZnSe as Faraday cells. And practical core-type optical current sensors using pure iron and permalloy have been prepared and experimented. In order to obtain efficient magnetic field detection, LED(NEC OD08358, 0.87 $\mu$m) was used as optical source, PIN-PD(OD-8454)as optical receiver and multi-mode optical fiber (100/140$\mu$m) as transmission line. The characteristics matrix of the optical element was calculated by Stokes parameter, and optic modulation characteristics equations were derived by Muller matrix. Electromagnetic analysis program (FLUX 2D, micro VAX 3600) by finite element method was used to find the magnetic flux density around the core. The measuring error of the output voltage to input current has been masured below 5% in the range of 50A to 1000A. As the temperature was changed from -20$^{\circ}C$ to 60$^{\circ}C$, the maximum measurement error of the optical output has been found to be 0.5% at 60$^{\circ}C$. These experimental results show good temperature and linearity characteristics. The SNR of the overall system was 47dB in case of 600A (250.2 Oe) conductor current and the system has good noise immunity.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.17 no.4
• /
• pp.325-332
• /
• 2005

This paper addresses the development of a scroll expander for power generation from relatively low temperature steam source. It has a double-sided orbiting scroll member so that no thrust bearing is needed to support the base plate of the orbiting scroll. Three power transmission shafts are placed at the periphery of the orbiting scroll base plate, and these shafts can also function as anti-rotation devices. Final output is obtained from the main central shaft engaged with the three power transmission shafts through gear assembly. The clearance between the fixed and orbiting scroll elements was estimated by comparing measurement of the mass flow rate with calculation results of a computer simulation. Due to large clearance, the expander total and volumetric efficiencies were measured to be $34\%\;and\;43\%$, respectively. It has been shown through the computer simulation that the total and volumetric efficiencies could be improved to $65\%\;and\;83\%$, respectively, if the current clearance is reduced by half.

• Journal of Integrative Natural Science
• /
• v.4 no.4
• /
• pp.311-314
• /
• 2011

Application of self-assembled monolayers (SAMs) to the fabrication of organic thin film transistor has been recently reported very often since it can help to provide ohmic contact between films as well as to form simple and effective electrode pattern. Accordingly, quality of these ultra-thin films is becoming more imperative. In this study, in order to manufacture a high quality SAM pattern, a hydrophobic alkylsilane monolayer and a hydrophilic aminosilane monolayer were selectively coated on $SiO_2$ surface through the consecutive procedures of a micro-contact printing (${\mu}CP$) and dip-coating methods under extremely dry condition. On a SAM pattern cleaned with SC1 solution immediately after ${\mu}CP$, poly(3,4-ethylenedioxythiophene) (PEDOT) source and drain electrode array were very selectively and nicely vapour phase polymerized. On the other side, on a SC1-untreated SAM pattern, PEDOT array was very poorly polymerized. It strongly suggests that the SC1 cleaning process effectively removes unwanted contaminants on SAM pattern, thereby resulting in very selective growth of PEDOT electrode pattern.

• Journal of Astronomy and Space Sciences
• /
• v.34 no.4
• /
• pp.251-256
• /
• 2017

The electric coupling between the lithosphere and the ionosphere is examined. The electric field is considered as a timevarying irregular vertical Coulomb field presumably produced on the Earth's surface before an earthquake within its epicentral zone by some micro-processes in the lithosphere. It is shown that the Fourier component of this electric field with a frequency of 500 Hz and a horizontal scale-size of 100 km produces in the nighttime ionosphere of high and middle latitudes a transverse electric field with a magnitude of ~20 mV/m if the peak value of the amplitude of this Fourier component is just 30 V/m. The time-varying vertical Coulomb field with a frequency of 500 Hz penetrates from the ground into the ionosphere by a factor of ${\sim}7{\times}10^5$ more efficient than a time independent vertical electrostatic field of the same scale size. The transverse electric field with amplitude of 20 mV/m will cause perturbations in the nighttime F region electron density through heating the F region plasma resulting in a reduction of the downward plasma flux from the protonosphere and an excitation of acoustic gravity waves.

• Fisheries and Aquatic Sciences
• /
• v.8 no.4
• /
• pp.201-206
• /
• 2005

Microalgae are widely used for mass culture of the rotifer Brachionus plicatilis in aquaculture. Since the nutritional value of the rotifer is closely related to its food, the nutritional value of its food should be known in detail. Chlorella ellipsoidea and Nannochloris oculata are re­presentative food organisms for rotifers that are easily cultured. Therefore, the nutritional values of these micro algae were examined for ultrasmall, small, and large rotifers and Artemia nauplii. Chlorella ellipsoidea contained seven times more total fatty acids than N. oculata. The three types of rotifer fed N. oculata contained more amino acids than those fed C. ellipsoidea. However, the total fatty acids of the rotifers fed each microalga species differed according to the type of rotifer. Newly hatched Artemia nauplii contained more protein and had a higher dry weight than those fed microalgae for 6 h. As with the rotifers, the Artemia nauplii fed N. oculata contained more protein and amino acids than those fed C. ellipsoidea, while the reverse was true for the total fatty acid content. Our results suggest that N. oculata is a good supply of protein, while C. ellipsoidea is a good source of lipids as food organisms for rotifers and Artemia nauplii in aquaculture.