• 제목/요약/키워드: Micro-Molding

검색결과 308건 처리시간 0.059초

One Step Fabrication of Organic Nanowires by using Direct Printing Method

  • Hwang, Jae.-K.;Sung, Myung-M.
    • 한국진공학회:학술대회논문집
    • /
    • 한국진공학회 2011년도 제41회 하계 정기 학술대회 초록집
    • /
    • pp.158-158
    • /
    • 2011
  • A wide range of techniques for the direct-printing of functional materials have been developed for the fabrication of micro- and nanoscale structures and devices. Here we report a new direct patterning method, liquid bridge-mediated nanotransfer molding (LB-nTM), for the formation of two- or three-dimensional structures with feature sized as small as tens of nanometers over large areas up to 4". LB-nTM is based on the direct transfer of various materials from a mold to a substrate via a liquid bridge between them. The LB-nTM method was applied to the preparation of organic nanowire FETs on flexible substrates.

  • PDF

비구면 Glass 렌즈 성형용 초경합금(WC) 코어의 DLC 코팅 효과 (DLC Coating Effect of WC Core Surface for Glass Molding Lens)

  • 김현욱;정상화;박용필;김상석;김혜정;김정호
    • 한국전기전자재료학회논문지
    • /
    • 제19권11호
    • /
    • pp.1050-1054
    • /
    • 2006
  • There have been intensive and continuous efforts in the field of DLC coating process because of their feature, like high hardness, high elasticity, abrasion resistance and chemical stability and have been applied widely the industrial areas. In this research, optimal grinding condition was investigated using Microlens Process Machine for the development of aspheric glass lens which is to be used for mobile phone module with 3 mega pixel and 2.5X optical zoom, and tungsten carbide(WC) mold cote was manufactured using high performance ultra precision machining and the effects of DLC coating on the form accuracy(PV) and surface roughness(Ra) of WC mold core was evaluated.

마이크로-나노 시스템 사출성형을 위한 PC Based PLC 기반의 사출성형기 배럴의 퍼지 온도 제어에 관한 연구 (A study on fuzzy temperature control for micro-nano injection molding using PC based PLC)

  • 정병찬;김훈모
    • 한국지능시스템학회:학술대회논문집
    • /
    • 한국퍼지및지능시스템학회 2002년도 추계학술대회 및 정기총회
    • /
    • pp.166-169
    • /
    • 2002
  • 본 논문에서는 사출성형기의 배럴의 정밀 온도제어에 대해 논의하였다 현재 사출성형기의 온도제어는 온도 편차가 2도 내외이며, 예열후 안정화되는데 걸리는 시간이 길다는 단점이 있다. 향후 마이크로-나노 시스템 제작 공정에 있어서 대량생산 방법으로 사출성형이 주목받을 것으로 기대된다. 특히 온도 제어의 경우는 사출시 인가해야 할 온도가 녹는점 및 glassy 온도에서 유지가 되면서 충분히 유동을 가지는 온도를 지속적으로 유지를 해야하므로 사출 후 정밀성에 중요한 요소가 된다. 마이크로-나노 사출공정은 극 미세 사출이며 온도, 압력에 따른 재료 특성 변화가 발생할 수 있으므로 이를 최적의 조건으로 제어할 수 있어야 한다. 본 연구에서는 실제 사출성형기와 PC based PLC를 이용한 온도제어기를 구현하고 실험하였다. 이를 통해 기존의 온도제어의 단점을 줄이고, 제어성능을 극대화하여 향후 마이크로-나노 시스템에 적용 가능한 정밀 온도제어기를 제안한다.

PDMS stamp 제조시 패턴의 전사 정확도 연구 (Investigation on Transcription Accuracy of PDMS Stamps to Mold Patterns)

  • 이은지;김경섭;김남훈;노용한
    • 한국전기전자재료학회:학술대회논문집
    • /
    • 한국전기전자재료학회 2007년도 추계학술대회 논문집
    • /
    • pp.99-100
    • /
    • 2007
  • Transferring patterns from mold to PDMS stamp is very useful technology in micro-fabrication, complex and three-dimensional structures. First experimentation, mold's patterns wens transferred to PDMS stamp. Comparing with PDMS stamp and Mold, patterns were transferred about 97.9%. Second experimentation, PDMS stamps were made several times by only one mold, scale and distance of transferred patterns were uniform about 89.3%. We proved that transferring patterns from mold to PDMS stamp is accurate. The uniformity of stamps is the same after mold was used several times. Transferring patterns from mold to PDMS stamp has uniformity and accuracy, it will be useful technology.

  • PDF

지식 기반 사출 금형 설계시스템 구조 (On the Structure of a Knowledge-Based Mold Design System)

  • 강무진;엄광호;김태수
    • 한국정밀공학회:학술대회논문집
    • /
    • 한국정밀공학회 2005년도 추계학술대회 논문집
    • /
    • pp.119-123
    • /
    • 2005
  • Mold design is a knowledge-intensive decision making process where product designer, injection molding engineer as well as mold designer affect each other. Representation and management of design knowledge is a prerequisite for an intelligent design system, which aims to guide and support designer to carry out design activity in more efficient way by avoiding or minimizing unnecessary trial and errors. This paper discusses the issues in knowledge-based mold design, and describes the structure of a knowledge-based mold design system fur parts with micro features under development.

  • PDF

Test and Analysis of Triaxially Braided Composite Circular Arch under Three-Point Bending

  • Nega, Biruk F.;Woo, Kyeongsik;Lee, Hansol
    • Composites Research
    • /
    • 제32권5호
    • /
    • pp.249-257
    • /
    • 2019
  • In this paper, the buckling behavior of triaxially braided circular arch with monosymmetric open section subjected to three-point bending was studied experimentally and numerically. First, test specimens were manufactured using vacuum assisted resin transfer molding (VARTM). Then the specimen was tested under three-point bending to determine the ultimate buckling strength. Before performing the numerical analysis, effective material properties of the braided composite were obtained through micro-meso scale analysis virtual testing validated with available test results. Then linear buckling analysis and geometrically non-linear post buckling analysis, established to simulate the test setup, were performed to study the buckling behavior of the composite frame. Analysis results were compared with experimentally obtained ones for verification. The effect of manufacturing defects of tow misalignment, irregular surface and resin rich region, and uncertainties during test setup were studied using numerical models. From the numerical analyses performed it was observed that both manufacturing defect and uncertainties had effect on the buckling behavior and strength.

심근세포 성숙도 및 수축력 향상을 위한 AgNW 기반의 기능성 폴리머 캔틸레버 (AgNW-based functional polymer cantilever to improve maturity and contractility of cardiomyocytes)

  • 정민영;심유리;윤하영;김동수;이동원
    • 센서학회지
    • /
    • 제30권3호
    • /
    • pp.185-189
    • /
    • 2021
  • Herein, we propose a functional polymer cantilever to enhance maturation and contractile force of cardiomyocytes. The proposed cantilever consists of a surface-patterned polymer substrate and silver nanowires (AgNWs). The AgNWs are transferred to the PDMS substrate using conventional molding techniques. This thin metallic surface significantly improves the adhesion of cardiomyocyte on the surface-patterned PDMS with the hydrophobic characteristics. In addition, the use of AgNWs improves the visibility of the conducting PDMS substrate for the observation of cardiomyocyte through an inverted microscope. The AgNWs also assist in synchronizing each cardiomyocyte to maximize its contractile force.

양수리 주거지출토 철제유물의 금속조직과 분석-BC1-AD1 세기 추정 철제유물을 중심으로 (The structure analysis of iron relics excavated at dwelling site of Yangsoo-ri)

  • 김수기
    • 보존과학연구
    • /
    • 통권27호
    • /
    • pp.165-180
    • /
    • 2006
  • The research was conducted to understand type of iron used by those who lived at dwelling site of Yangsoo-ri in between the first century B.C. and the first century A.D. to make steel products and their technique such as steel making process and heat treatment, based on micro structure information obtained through microscopic metallographic structure analysis with SEM-EDS of six steel productsexhumed at the site. Key findings are summarized as below. In the sense that Si-Ca-Al style and less than 0.5% of Ti were found in the non-metallic inclusion, the material used for forged iron ware was magnetite resolved in that. It is, however, unclear whether magnetite was resolved at high temperature or at low temperature. Microscopic structure analysis revealed that forged steel products were made through repeated hot working, the technique of molding by hitting after heating in the process of resolving and molding iron. As a result, the iron used here for the products was not the iron ore which was produced through resolution from discarded cast iron axe, ingot iron. It is probable that to make those steel products, disposed-of cast iron was reused after being molded by decarburizing. Although a few of relics were analyzed for the research, they were of critical importance in defining the process of ironware production from the first century B.C. and the first century A.D. at the Yangsoo-ri region. Judging from the iron from A-19 dwellingsite, it is possible to conclude that the iron was manufactured from cast iron decarburized and yet more research has to be done into relics yetto be exhumed in order to ascertain the finding. All of these findings are believed to play a critical role in further studies to define the steel-manufacturing technique used on the central Korean peninsular in the ancient times.

  • PDF

진공 압력차이법에 의한 나노 정밀도를 가지는 폴리디메틸실록산 형상복제 (Fabrication Process of a Nano-precision Polydimethylsiloxane Replica using Vacuum Pressure-Difference Technique)

  • 박상후;임태우;양동열;공홍진;이광섭
    • 폴리머
    • /
    • 제28권4호
    • /
    • pp.305-313
    • /
    • 2004
  • 본 연구는 나노 복화공정을 이용하여 마이크로 혹은 나노공정에 응용이 가능한 형상모형 제작공정 개발과 폴리디메틸실록산 (polydimethylsiloxane)를 이용하여 만들어진 형상모형의 몰드로 나노급 정밀도의 폴리디메틸실록산 형상을 복제하는 공정에 관한 것이다. 본 연구에서 제안한 나노 복화공정은 복잡한 형상모형 (pattern)이나 2차원 형상을 CAD 파일 없이 비트맵 그림파일을 이용하여 직접적으로 200nm 정밀도를 가지는 형상으로 만들 수 있다. 형상모형은 펨토초 레이저를 이용하여 이광자 흡수 중합법으로 제작하기 때문에 형상의 정밀도는 레이저 범의 회절한계 이하로 얻을 수 있다. 이렇게 제작된 마스터 형상모형은 본 연구에서 제안한 진공압력차이법으로 폴리디메틸실록산 몰드를 제작하여 기존의 제작방법에 비하여 정밀한 제작이 가능함을 보였으며 또한 제작된 몰드를 이용하여 양각의 플리디메틸실록산 스탬프를 제작하였다.

다양한 기판 위에서 고분자 전해질 다층 막과 폴리에틸렌글리콜 미세 구조물을 이용한 세포 패터닝 방법 (Cell Patterning on Various Substrates Using Polyelectrolyte Multilayer and Microstructure of Poly(Ethylene Glycol))

  • 심현우;이지혜;최호석;이창수
    • Korean Chemical Engineering Research
    • /
    • 제46권6호
    • /
    • pp.1100-1106
    • /
    • 2008
  • 본 연구는 표면에 세포를 부착하는데 있어서, 다양한 기판 표면에 보편적인 플랫폼으로써 적용될 수 있는 세포 부착을 위한 기능성 표면의 제작 기술 및 이를 이용한 세포의 선택적인 고정과 편리한 세포 패터닝의 방법을 보여주었다. 세포 부착에 적합한 기능성 표면의 제작은 산소 플라즈마 처리를 이용한 다양한 기판의(유리, PMMA, PS, PDMS) 표면 활성화 및 상반되는 고분자 전해질의(PAH, PDAC, PSS, PAA) 정전기적 인력을 통한 증착으로 이루어진 다층의 고분자 전해질 층을 통해 제작될 수 있었다. 또한, 고분자 전해질로 증착된 표면 위로 마이크로 몰딩 인 케필러리 방법을 사용하여 PEG 마이크로 구조물을 제작함으로써 세포의 선택적인 고정이 이루어질 수 있었다. 다층의 고분자 전해질로 증착된 표면은 세포와의 강한 정전기적 인력으로 세포 부착에 유리한 표면을 제공하였다. 반면에, 제작된 PEG 마이크로 구조물은 물리적, 생물학적인 장애물의 역할로써 세포의 비 특이적인 흡착을 방지하였다. 세포 부착을 위한 기능성 표면을 제작하는 동안 표면의 특성은 접촉각 측정을 통해 이루어 졌다. 다양한 기판 상에서 개질된 표면은 세포 부착을 위한 적합한 환경의 제공과 함께 세포의 마이크로 패터닝 기술에서 높은 수율의 세포 패터닝을 제공한다. 상기의 제안된 세포 부착을 위한 기능성 표면 제작 기술 방법은 제작 과정이 매우 간단하고, 편리하여 손쉽게 구현이 가능하며, 제작 공정에서 어떠한 해로운 용매도 사용하지 않기 때문에 친환경적이다. 또한, 이를 이용하여 세포를 이용하는 바이오 칩 및 바이오 센서, 세포를 기반으로 하는 시스템 등에서 기본이 되는 기술로 사용될 수 있는 넓은 응용 범위를 갖는다.