• Asian Journal of Atmospheric Environment
• /
• v.11 no.2
• /
• pp.122-130
• /
• 2017

The main purpose of the study was to clarify the properties of individual particles collected at each behavior space of a factory worker. The samplings of size-segregated ($PM_{2.1-1.1}$ and $PM_{4.7-3.3}$) indoor particles were conducted at three different behavior spaces of a factory worker who is engaged in an auto parts manufacturing plant (i.e., his home, his work place in factory, and his favorite restaurant). Elemental specification (i.e., relative elemental content and distribution in and/or on individual particles) was performed by a micro-PIXE system. Every element detected from the coarse particulate matters of home was classified into three groups, i.e., a group of high net-counts (Na, Al, and Si), a group of intermediate net-counts (Mg, S, Cl, K, and Ca), and a group of minor trace elements (P, Ti, V, Cr, Mn, Fe, Co, Ni, Cu, Zn, and Pb). The results of EF for $PM_{4.7-3.3}$ in home indicated that several heavy metals were generated from the sources within the house itself. An exceptional feature shown in the individual particles in workplace is that Cr, Mn, and Co were clearly detected in both fine and coarse particles. Cluster analysis suggested that the individual coarse particles ($PM_{4.7-3.3}$) collected at the indoor of factory were chemically heterogeneous and they modified with sea-salt, mineral, and artificially derived elements. The principal components in individual coarse particles collected at restaurant were sea-salt and mineral without mixing with harmful trace elements like chromium and manganese. Compared to the indoor fine particles of home and restaurant, many elements, especially, Cl, Na, Cr, Mn, Pb, and Zn showed overwhelmingly high net-counts in those of factory.

• Microbiology and Biotechnology Letters
• /
• v.31 no.2
• /
• pp.182-190
• /
• 2003

As DNA microarrays are widely used recently, the amount of microarray data is exponentially increasing. Until now, however, no domestic system is available for the efficient management of such data. Because the number of experimental data in a specific laboratory is limited, it is necessary to avoid redundant experiments and to accumulate the results using a shared data management system for microarrays. In this paper, a system named WEMA (WEb management of Micro Arrays) was designed and implemented to manage and process the microarray data. WEMA system was designed to include the basic feature of MIAME (Minimal Information About a Microarray Experiment), and general data units were also defined in the system in order to systematically manage the data. The WEMA system has three main features: efficient management of microarray data, integration of input/ouput data, and metafile processing. The system was tested with actual microarray data produced by a molecular biology laboratory, and we found that the biologists could systematically manage and easily analyze the microarray data. As a consequence, the researchers could reduce the cost of data exchange and communication.

• Genomics & Informatics
• /
• v.3 no.1
• /
• pp.15-23
• /
• 2005

Background MicroRNAs (miRNAs) are a class of noncoding RNAs found in various organisms such as plants and mammals. However, most of the mRNAs regulated by miRNAs are unknown. Furthermore, miRNA targets in genomes cannot be identified by standard sequence comparison since their complementarity to the target sequence is imperfect in general. In this paper, we propose a kernel-based method for the efficient prediction of miRNA targets. To help in distinguishing the false positives from potentially valid targets, we elucidate the features common in experimentally confirmed targets. Results The performance of our prediction method was evaluated by five-fold cross-validation. Our method showed 0.64 and 0.98 in sensitivity and in specificity, respectively. Also, the proposed method reduced the number of false positives by half compared with TargetScan. We investigated the effect of feature sets on the classification of miRNA targets. Finally, we predicted miRNA targets for several miRNAs in the Caenorhabditis elegans (C. elegans) 3' untranslated region (3' UTR) database. Condusions The targets predicted by the suggested method will help in validating more miRNA targets and ultimately in revealing the role of small RNAs in the regulation of genomes. Our algorithm for miRNA target site detection will be able to be improved by additional experimental­knowledge. Also, the increase of the number of confirmed targets is expected to reveal general structural features that can be used to improve their detection.

• Journal of the Korean Society for Precision Engineering
• /
• v.30 no.12
• /
• pp.1303-1312
• /
• 2013

We report an ultra-precision lathe designed to machine micron-scale features on a large-area roll mold. The lathe can machine rolls up to 600 mm in diameter and 2,500 mm in length. All axes use hydrostatic oil bearings to exploit the high-precision, stiffness, and damping characteristics. The headstock spindle and rotary tooling table are driven by frameless direct drive motors, while coreless linear motors are used for the two linear axes. Finite element method modeling reveals that the effects of structural deformation on the machining accuracy are less than $1{\mu}m$. The results of thermal testing show that the maximum temperature rise at the spindle outer surface is approximately $0.5^{\circ}C$. Finally, performance evaluations of the error motion, micro-positioning capability, and fine-pitch machining demonstrate that the lathe is capable of producing optical-quality surfaces with micron-scale patterns with feature sizes as small as $20{\mu}m$ on a large-area roll mold.

• Journal of the Korean Society for Library and Information Science
• /
• v.45 no.4
• /
• pp.309-326
• /
• 2011

There have been several milestones in the history of library classification but most of the schemes failed to meet the new challenges in the organisation of information. Dr. S. R. Ranganathan tried to revolutionise the whole thinking on classificatory approach, when he devised the Colon Classification (CC) in 1933. He developed the Colon Classification scheme with a sound theoretical background based on normative principles, Five laws of Library science, canons, etc. One important feature of CC is that, its use is not confined to information storage and retrieval alone. This paper presents an over view of different editions of the CC highlighting the salient features of the editions. Further the implication of Five Laws of Library Science has been described. The authors stressed that the features of such as greater hospitality, specificity and mixed notation has paved the way to design and develop the depth schedules on various micro level subjects and so far about 130 micro schedules have been published. The impressions by the leading LIS professionals during and after Ranganathan's time have been highlighted. The authors expressed the fear that when the library world would see the complete version of the seventh edition of CC? It may be due to lack of institutional support engaging in the research or financial constraints. The authors are of the opinion that any scheme to flourish needs a sound research body to bring out the revised editions as done in the case of Dewey Decimal Classification. The relevance of the CC in the contemporary world of Librarianship is discussed. Finally concludes that CC needs to be resuscitated as it is a precious national heritage; and still a force for the management of libraries.

• Journal of Internet of Things and Convergence
• /
• v.6 no.2
• /
• pp.11-18
• /
• 2020

Since the end devices of the Internet of Things (IoT) are battery operated products, careful consideration for ultra-low power (ULP) is required. The Micro Controller Unit (MCU) industry has developed very effective functions to save energy, but developers have difficulty in selecting the MCU because various operating modes are applied to reduce energy consumption by manufacturers. Therefore, this paper introduces ULPMark benchmark, a standardized benchmark method that can compare MCUs of various vendors and feature sets, and provides hardware functions for ultra-low-power operation of the two platforms that received the high evaluation scores from ULPMark. In addition, we investigated and analyzed how developers can utilize the functions for ultra low power consumption through driver APIs and detailed register control.

• Proceedings of the Korean Information Science Society Conference
• /
• 2006.10a
• /
• pp.53-58
• /
• 2006

MicroRNA (miRNA)는 약 22 nt의 작은 RNA 조각으로 이루어져 있으며 stem-loop 구조의 precursor 형태에서 최종적으로 만들어 진다. miRNA는 mRNA의 3‘UTR에 상보적으로 결합하여 유전자의 발현을 억제하거나 mRNA의 분해를 촉진한다. miRNA를 동정하기 위한 실험적인 방법은 조직 특이적인 발현, 적은 발현양 때문에 방법상 한계를 가지고 있다. 이러한 한계는 컴퓨터를 이용한 방법으로 어느 정도 해결될 수 있다. 하지만 miRNA의 서열상의 낮은 보존성은 homology를 기반으로 한 예측을 어렵게 한다. 또한 기계학습 방법인 support vector machine (SVM) 이나 naive bayes가 적용되었지만, 생물학적인 의미를 해석할 수 있는 generative model을 제시해 주지 못했다. 본 연구에서는 우수한 miRNA 예측을 보일 뿐만 아니라 학습된 모델로부터 생물학적인 지식을 얻을 수 있는 Bayesian network을 적용한다. 이를 위해서는 생물학적으로 의미 있는 특질들의 선택이 중요하다. 여기서는 position weighted matrix (PWM)과 Markov chain probability (MCP), Loop 크기, Bulge 수, spectrum, free energy profile 등을 특질로서 선택한 후 Information gain의 특질 선택법을 통해 예측에 기여도가 높은 특질 25개 와 27개를 최종적으로 선택하였다. 이로부터 Bayesian network을 학습한 후 miRNA의 예측 성능을 10 fold cross-validation으로 확인하였다. 그 결과 pre-/mature miRNA 각 각에 대한 예측 accuracy가 99.99% 100.00%를 보여, SVM이나 naive bayes 방법보다 높은 결과를 보였으며, 학습된 Bayesian network으로부터 이전 연구 결과와 일치하는 pre-miRNA 상의 의존관계를 분석할 수 있었다.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.43 no.3
• /
• pp.101-113
• /
• 2015

The purpose of this study is increasing ventilation network usability for urban green space planning by enhancing its practicality and detail. A ventilation network feature extraction technique using roughness length($z_0$) was proposed. Continuously surfaced DZoMs generated from $z_0$(cadastral unit) using three interpolations(IDW, Spline, and Kriging) were compared to choose the most suitable interpolation method. Ventilation network features were extracted using the most suitable interpolation technique and studied with land cover and land surface temperature by spatial overlay comparison. Results show Kriging is most suitable for DZoM and feature extraction in comparison with IDW and Spline. Kriging based features are well fit to the land surface temperature(Landsat-7 ETM+) on summer and winter nights. Noteworthy is that the produced ventilation network appears to mitigate urban heat loads at night. The practical use of proposed ventilation network features are highly expected for urban green space planning, though strict validation and enhancement should follow. (1) $z_0$ enhancement, (2) additional ventilation network interpretation and editing, (3) linking disconnected ventilation network features, and (4) associated dataset enhancement with data integrity should technically preceded to enhance the applicability of a ventilation network for green space planning. The study domain will be expanded to the Seoul metropolitan area to apply the proposed ventilation network to green space planning practice.

• Explosives and Blasting
• /
• v.35 no.1
• /
• pp.43-52
• /
• 2017

Mountain and hill areas occupy by more than 70% in South Korea and Rock drilling should be applied in order to reduce noisy & vibration from massive civil engineering business such as road expansion, high-way construction, subway construction and construction of site renovation such as a newly-built & re-development of apartment, newly-built of high-rising building in downtown area. As Blasting noise & vibration such as vibration, noise, fly rock etc caused by blasting operation from large small scale construction occurs, neighboring residents who demand the compensation file a civil complaint so that the business reach a deadlock. As the excavation method for these areas, There are blasting of micro-vibration, mechanical excavation method(Rock splitter, Breaker etc), similar blasting method(plasma, gel fragmentation etc) to date. In this study, we are trying to find the feature & performance which get improved economic feasibility & construct ability through improving sympathetic detonation of New KINECKER-I used in blasting of micro-vibration & formulation and would provide convenience for use by introducing standard blasting pattern & construction method. Also, checked and confirmed all the blasting with connecting cap has been cleary detonated.

• The Transactions of the Korean Institute of Electrical Engineers C
• /
• v.49 no.12
• /
• pp.685-690
• /
• 2000

Multiple-lightning impulse currents are a general feature of the lightning ground f=flash. It is therefore necessary for lightning arresters used in power systems to be estimated by applying not only a single-lightning impulse current but also a multiple-lightning impulse currents. This paper presents the effects of multiple-lightning impulse currents on deterioration of ZnO arrester blocks. The multiple-lightning impulse generator which can produce quadruple 8/20$[\mus]$ 5[kA] with separation time of 30~120[ms] is designed and fabricated. The total energy applied to the arrester block at each impulse is about 1,200[J]. In experiment, various parameters such as leakage current component, reference voltage, and temperature are measured with the number of applied impulse current. Also, micro-structure changes of the ZnO blocks after applying the single and the multiple-lightning impulse currents of 200 times are compared. The experimental results indicate that the types of arrester blocks are more vulnerable to deterioration or damage by multiple-lightning impulse currents.