• Smart Structures and Systems
• /
• 제29권3호
• /
• pp.445-455
• /
• 2022

Steel anchor bolts are installed in concrete using a variety of methods. One of the most common methods of anchor bolt installation is using epoxy resin as an infill material injected into the drilled hole to act as a bonding material between the steel bolt and the surrounding concrete. Typical design standards assume uniform stress distribution along the length of the anchor bolt accompanied with single crack leading to pull-out failure. Experimental evidence has shown that the steel anchor bolts fail owing to the multiple failure patterns, hence these design assumptions are not realistic. In this regard, the presented research work details the analytical model that takes into consideration multiple micro cracks in the infill material induced via impact loading. The impact loading from the Schmidt hammer is used to evaluate the bond condition bond condition of anchor bolt and the epoxy material. The added advantage of the presented analytical model is that it is able to take into account the various type of end conditions of the anchor bolts such as bent or U-shaped anchors. Through sensitivity analysis the optimum stiffness and shear strength properties of the epoxy infill material is achieved, which have shown to achieve lower displacement coupled with reduced damage to the surrounding concrete. The accuracy of the presented model is confirmed by comparing the simulated deformational responses with the experimental evidence. From the comparison it was found that the model was successful in simulating the experimental results. The proposed model can be adopted by professionals interested in predicting and controlling the deformational response of anchor bolts.

• 한국자기학회지
• /
• 제15권1호
• /
• pp.30-36
• /
• 2005

최근 20년 동안 스핀 스프레이 방법으로 제조된 페라이트 필름이 갖는 여러 가지 우수한 점들이 보고되어 왔다. 기존의 벌크 페라이트 재료와 달리 고주파 특성이 우수하며, $100^{\circ}C$ 이하에서 저온 공정이 가능한 점이 그것이다. 따라서 상기의 방법을 이용하여 micro DC-DC 컨버터용 Ni-Zn 페라이트 인턱터를 제조하였으며, 기판재료는 폴리이미드를 사용하였고, 라미네이션과 비아홀 가공, 도금 공정을 이용하여 임베디드 형태를 완성하였다. 또한 Ni-Zn ferrite는 절연체이므로 다른 절연층을 형성하지 않았다. 제조된 Ni-Zn ferrite 는 약 0.61 T의 포화자화, 약 110의 실수 투자율을 보였고, 인덕터의 특성은 스파이럴 16턴 디자인의 경우 5 MHz에서 1.52 H에 Q-factor 24.3, 정격전류 863 mA였다.