• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.16 no.5
• /
• pp.1-6
• /
• 2017

Gear tooth micro-geometry modifications include the intentional removal of material from the gear teeth flanks, so that the shape is no longer a perfect involute. If the gear shapes are perfect, then the gear tooth meshing is better, therefore the gears will transmit input torque in a more efficient manner without the generation of high frequency engine fluctuation noise. In this paper, we study tooth micro-geometry optimization of rear gear set in 2 speed planetary gear reducers. Analysis revealed problems which are need of modification. Based on the results, tooth micro-geometry was used to deal with load distributions on the rear gear set.

• Computational Structural Engineering
• /
• v.2 no.4
• /
• pp.69-77
• /
• 1989

Until recently post-processing of finite element model has been heavily relied on expensive graphic peripheral devices. With the aid of inexpensive microcomputers, very economical post-processor graphics program called MICRO-POST has been developed. Model geometry or results of analysis for the unlimited meshes can be easily presented in a number of low-cost graphic devices. The paper presents the procedure obtaining the device-independent graphics, and the structure and functions of the program. It also describes efficient I/O scheme to overcome the memory limitation, and dialogue-type input technique to control the plot operation in an interactive manner. Through the post processing examples for the general purpose finite element programs, it demonstrates the usefulness of the program.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.41 no.1
• /
• pp.17-24
• /
• 2013

In this paper, a micro-mechanical failure prediction program is developed based on SIFT (Strain Invariant Failure Theory) by using the multi-scale modeling method for fiber-reinforced composite materials. And the failure analysis are performed for open-hole composite laminate specimen in order to verify the developed program. First of all, the critical strain invariants are obtained through the tensile tests for three types of specimens. Also, the matrices of strain amplification factors are determined through the finite element analysis for micro-mechanical model, RVE (Representative Volume Element). Finally, the microscopic failure analysis is performed for the open-hole composite laminate specimen model by applying a failure load obtained from tensile test, and the predicted failure indices are evaluated for verification of the developed program.

• Journal of the Microelectronics and Packaging Society
• /
• v.18 no.3
• /
• pp.59-65
• /
• 2011

According to the trends of electronic package to be smaller, thinner and more integrative, Flip Chip Ball Grid Array (FCBGA) become more used for mobile phone. However, the flip chip necessarily generate the heat by the electrical resistance and generated heat is increased due to reduced distribution area of the heat in accordance with the miniaturization trend of the package. Thermal issues can result in problems of devices that are sensitive to temperature and stress. Then the heat can generate problems to the system. In this paper, in order to improve the thermal issues of FCBGA, thermal characteristics of FCBGA was analyzed qualitatively by using the general heat transfer module of Comsol 3.5a and In order to solve thermal issues, flip chip with new micro structure is proposed by the simulation. and also by comparing existing model and analyzing variables such as pitch, height of the pattern and shape of the heat spreader, the improvement of heat dissipation characteristics about 18% was confirmed.

• Proceedings of the KIEE Conference
• /
• 2008.07a
• /
• pp.936-937
• /
• 2008

As a micro computer or micro processor technology has been advanced, the essential part which consists of electric power system has been changed into intelligent electronic device(IED), that is one kind of embedded system. There are already many parts changed into digital from analog in control and maintenance devices of electric system. These trends make advanced and novel concepts of devices and systems, that we couldn't even imagine in the analog circumstances. Now, the rate's of change is comparatively slower than IT field that is mainly represented by mobile communication, but that is a big change in the history of electric industries. Some people in those field called it Power-IT, and there have been many kinds of researches. Accelerated systems to go digital, users always and continuously demand more convenient, practical, and new functions. So, a lot of electric system manufactures have had tasks realizing many kinds of functions in an electronic device. According to the high-end technologies in semi-conductor and micro-computer field, manufactures can fully satisfy almost all of customer's needs, but there are other kinds of problems, such as large amount of program code, increasing complexity in proportion with program amount, and the hardness of maintenance and revision of the program. So nowadays, the necessity of embedded OS was emerged as a solution, and many researchers and manufactures have concentrated on studies related to embedded OS and its application.

• Journal of the Korean School Mathematics Society
• /
• v.12 no.1
• /
• pp.1-25
• /
• 2009

The purpose of this research is the investigation of mathematics pre service teachers' disposition. Their disposition will be used for preposition of preservice Leacher program for making pre service teachers' participate any program willingly and extend their thinking. For this research, the researcher collected various data from investigation-presentation, report for practice and beauty of mathematics, micro teaching, and peer-evaluation. Preservice teachers had positive attitude for mathematics. They described their feeling, thinking and reflection about various methods of instruction and prefer to have micro teaching. They described that the investigation-presentation was needed to change some. From the results, the teacher preparation program is needed to integrate theory and practice to make preservice teachers gain profound knowledge on pedagogical content knowledge by making them high their interest and sensitivity on mathematics.

• Archives of Plastic Surgery
• /
• v.36 no.4
• /
• pp.475-480
• /
• 2009

Purpose: To correct the facial asymmetry and to achieve symmetry and balance, not only the soft tissue restoration of deficits but also creation and facial contour line such as mandible border and angle is important. Micro fat graft has limitation such as high resorption rate and somewhat limited ability to emphasize the rigid bony characteristics of the mandible angle due to its innate soft consistency. We have investigated the advantages of dermal fat graft over micro fat graft to correct asymmetry of the lower face in patients who had undergone mandibular reconstruction or distraction, using comparative analysis. Methods: Total of 12 patients were enrolled in our study: 6 micro fat graft and 6 dermal fat graft. Postoperative results were compared and analyzed at immediate postoperative period and more than 1 year later in each group with photographs, and analysised with image J program. Result: No complications were noted both in the micro fat type and the dermal fat type of procedures such as fat necrosis or micro calcifications. All of the patients who received micro fat graft, however had considerable amount of fat resorption after the procedure which led to two additional fat graft procedures. Although minor contour obliteration due to contracture was seen in patients who had undergone dermal fat graft procedure, no definite resorption was found even after more than one year follow-up. Results of dermal fat graft patients were satisfactory in terms of mandible angle symmetry. Secondary revision was necessary in one case due to overcorrection using dermal fat graft. Conclusion: The dermal fat graft has many advantages over the conventionally more popular micro fat graft to correct asymmetry of the lower face following mandible reconstruction owing to its lower resoption rate, more effective in emphasizing the natural curvilinear anatomical contours of the mandible angle and body and lower complication rates such as fat necrosis or micro calcifications.

• Journal of the Semiconductor & Display Technology
• /
• v.18 no.2
• /
• pp.6-10
• /
• 2019

In the presence of $\mu-tip$ for narrow stripe coating, there appears lateral capillary flow along the hydrophilic head lip because the $\mu-tip$ has some resistance to flow. It was known to be suppressed by increasing the contact angle of the head lip. In this paper, we have demonstrated by computational fluid dynamics(CFD) simulations that it can also be suppressed by the formation of micro-patterns on the shim and meniscus guide embedded into the slot-die head. To optimize the micro-patterned structure, we have performed simulations by varying the groove width, depth, and clearance. In the absence of micro-patterns, it is shown by experiment and simulation that the solution spreads to a distance of $1,300{\mu}m$ from the ${\mu}-tip$. In the presence of micro-patterns with the groove width and clearance of $50{\mu}m$, the distance the solution spreads is reduced to $260{\mu}m$. However, no further suppression in the capillary flow is observed with micro-patterns with the groove width of $40{\mu}m$ or less. It is also observed that the capillary flow is not affected by the groove depth if it is larger than $10{\mu}m$. We have shown that the distance the solution spreads can be reduced further to $204{\mu}m$ by coating a hydrophobic material (contact angle of $104^{\circ}$) on the surface of micro-patterns having the groove width and clearance of $50{\mu}m$.

• Proceedings of the KOSOMBE Conference
• /
• v.1997 no.11
• /
• pp.385-387
• /
• 1997

Plasma luminescence spectroscopy was used or precise ablation of bone tissue during ultrashort pulse laser (USPL) micro-spinal surgery. Strong contrast of the luminescence spectra between bone marrow and spinal cord provided the real time feedback control so that only bone tissue can be selectively ablated while preserving the spinal cord.

• Journal of Life Science
• /
• v.24 no.7
• /
• pp.798-803
• /
• 2014

Cathepsin D (CtsD), an aspartyl peptidase, is involved in apoptosis, resulting in the release of cytochrome C from mitochondria in cells. Here, we investigated microRNA regulation of CtsD expression in 3T3-L1 cells First, we observed the expression of CtsD in cells in response to doxorubicin (Dox). As expected, the level of CtsD mRNA was increased in 3T3-L1 cells exposed to Dox in a dose-dependent manner. Cellular viability of ectopically expressed CtsD cells was also decreased. Next, we used the miRanda program to search for particular microRNA targeting CtsD. MiR-145 was selected as a putative controller for CtsD because miR-145 had a high mirSVR score. In a reporter assay, the luciferase activity of cells containing the CtsD 3'-UTR region was decreased in cells transfected with miR-145 mimic compared to that of a control. The level of CtsD expression was down-regulated in preadipocytes ectopically expressing miR-145 and up-regulated by an miR-145 inhibitor. Cells also suppressed miR-145 expression when exposed to Dox. The miR-145 inhibitor reduced the cellular viability of 3T3-L1 cells. Taken together, these data suggest that miR-145 regulates CtsD-mediated cell death in adipocytes. These findings may have valuable implications concerning the molecular mechanism of CtsD-mediated cell death in obesity, suggesting that CtaD could be a useful therapeutic tool for the prevention and treatment of obesity by regulating fat cell numbers.