• 정보처리학회논문지C
• /
• 제9C권5호
• /
• pp.687-698
• /
• 2002

무선인터넷의 활성화와 더불어 기존의 유선 및 무선 전자상거래를 통합하는 여러 방안에 대한 관심이 고조되고 있다 유.무선 통합형 전자상거래를 위해서 무선통신 환경에서의 최적화된 보안 및 인증 그리고 사용자에게 보다 편리한 사용방안이 선결되어야 한다. 본 논문에서는 J2ME(Java 2 Micro Edition) 기반 MIDP(Mobile Information Device Profile)를 이용해서 전자지불용 전자지갑 모듈 개발을 통해 유선과 무선에서 공통으로 사용할 수 있는 유\ulcorner무선 연동의 모바일 전자지갑(Mobile Wallet)을 설계 및 구현하였다. 본 논문에서 구현한 전자지갑의 특징은 지불정보의 암\ulcorner복호화를 통한 안전성 제공과 전자지갑의 다운로드를 통해 유.무선 환경에서 온라인 형태로 사용할 수 있는 기능을 제공하는 것이다. 또한 유.무선인터넷 전자상거래에서 안전하고 편리한 지불방안을 제시한다.

• 한국지형학회지
• /
• 제25권1호
• /
• pp.31-45
• /
• 2018

This study investigated the characteristics of sedimentary environment changes across a tidal flat in Gagyeongju of Anmyeondo Island. We performed a spatio-temporal analysis on the grain sizes composition of sediments and micro-landform changes during the winter from 2013 to 2016. The results showed that erosion was a dominant processthroughout the study flat, reducing the surface elevation even by 1 m around the upper sand flat. As a consequence, headlands have formed in the entire region of Gagyeongju village. In addition, erosion quickly progressed along the low-lying subtidal zone and tide way and, in contrast, sedimentation progressed in the mid-elevation tidal flat. We posit that a jetty, which had been constructed as a pier facility on the eastern part of the study area, interfered with the flow of tidal current, thereby enhancing these erosional processes. This is because such interference can block the supply of fine-textured sediments from the nearby Cheonsu Bay and therefore reduce surface elevation. According to the surface sediment analysis, the sediments were categorized into 7 sedimentary facies, and generally displayed a high ratio of silt and clay. The result of time-series analysis (2012-2013) showed that the sediments on the tidal flat became fine-grained, and that sorting became worse. However, the sediments on the subtidal zone, embayment and along inside of the jetty tended to be coarse-grained. In conclusion, the tidal flat microlandform change in the study area was caused by a disruption in the seawater circulation due to the jittery construction within the tidal flat, which had a direct effect on erosional and sedimentary environment processes.

• Design & Manufacturing
• /
• 제17권4호
• /
• pp.42-51
• /
• 2023

In this study, we investigated the injection molding technology of thick-walled light guides, which are parts that control the light source of automotive lamps. Through injection molding analysis, the gate position that can minimize product shrinkage and deformation was selected, and a mold reflecting the analysis results was manufactured to evaluate the effect of injection speed and holding pressure on transferability during micro-pattern molding through experiments. When designing an injection mold for products with varying thicknesses, it was found that installing the gate on the side of the thicker part was advantageous for reducing volume shrinkage and deformation. It was found that the effect of shrinkage due to thickness may be greater than the position of the gate on pattern transferability. The pattern transfer error decreased as the injection speed and holding pressure increased, and it was found that increasing the injection speed was relatively effective.

• Korean Chemical Engineering Research
• /
• 제50권4호
• /
• pp.690-695
• /
• 2012

가스 하이드레이트는 순수한 물이 이루는 격자구조 내에 다양한 가스분자들이 선택적으로 포획되어진 고체상의 화합물로, 최근 이산화탄소를 포집, 수송, 저장 하는 CCS (Carbon Capture and Storage)기술에 이를 응용하려는 연구가 활발히 진행되고 있다. 가스 하이드레이트를 적용한 CCS 기술의 핵심은 효과적으로 $CO_2$ 하이드레이트를 제조하는 기법의 개발이며, 본 연구에서는 초음파 노즐을 이용하여 수십 나노미터 직경의 미세수적을 통해 고속의 $CO_2$ 하이드레이트 제조기술 개발하였고, 이 과정의 특성을 파악해 보았다. 주파수 2.4 MHz의 초음파 노즐을 이용하여 미세직경의 수적을 분무하고 이송가스(carrier gas)로 $CO_2$를 적용, 미세 수적과 $CO_2$가 동시에 급속 냉각되는 저온 반응기에 도입되어 다공질 얼음입자가 직접 평균 $10.7{\mu}m$ 직경의 $CO_2$ 하이드레이트로 생성되는 연속공정을 개발하였다. 미세직경 얼음입자를 시작물로 하여 정압조건에서 $CO_2$ 하이드레이트가 생성되도록 하며 가스포집량을 측정, 그의 가스 포집속도를 알아본 결과, 미세직경이며 동시에 다공 얼음이 제공하는 높은 기-고 접촉면적으로 인해 가스 하이드레이트 생성에 매우 적합한 것을 알 수 있었으며, 제조된 $CO_2$ 하이드레이트의 자기보존효과(self-preservation effect)를 실험으로 확인함으로서 $CO_2$ 가스의 수송에도 이용 가능함을 알 수 있었다.

• Composites Research
• /
• 제29권5호
• /
• pp.315-320
• /
• 2016

일반적으로 항공기 복합재 구조물은 고압의 오토클레이브(Autoclave)를 이용하여 제작하고 있으나 제작 가능한 크기가 제한적이고 고가라는 단점이 있다. 최근 전통적인 오토클레이브 공정을 대체하기 위해 Out-of-Autoclave(OoA) 공정에 대한 연구가 많이 이루어지고 있다. 최근에 개발된 OoA 프리프레그는 오븐에서 경화가 가능하기 때문에 장비 투자비와 경화 비용이 낮을 뿐만 아니라 오토클레이브 프리프레그와 유사한 품질을 나타내는 것으로 알려져 있다. 그러나 OoA 공정은 낮은 압력 때문에 복잡한 형상의 부품을 결함없이 제작하기는 매우 어렵다. 본 연구에서는 최신 OoA 프리프레그를 이용하여 Skin-Spar-Rib 일체형 복합재 부품을 제작하고 단면 관찰 결과를 통해 기존 오토클레이브 공정의 대체 가능성을 판단하고자 한다.

• 대한치과보철학회지
• /
• 제45권5호
• /
• pp.687-695
• /
• 2007

Statement of problem: The proper contact relation between adjacent teeth in each arch plays an important role in the stability and maintenance of the integrity of the dental arches. Proximal contact has been defined as the area of a tooth that is in close association, connection, or touch with an adjacent tooth in the same arch. Purpose: The aim of this study was to develop a digital device for measuring the proximal tooth contact tightness by pulling a thin stainless steel strip (2mm wide, 0.03mm thick) inserted between proximal tooth contact. Material and method: This device consists of measuring part, sensor part, motor part and body part. The stainless steel strip was connected to a stain gauge. The strain gauge was designed to convert the frictional force into a compressive force. This compressive force was detected as a electrical signal and the electrical signal was digitalized by a A/D converter. The digital signals were displayed by a micro-processor. The pulling speed was 8mm/s. Results: For testing reliability of the device in vivo, two healthy young adults (A, B) participated in this experiment. The tightness of proximal tooth contact between the second premolar and the first molar of mandible (subject A) and maxilla (subject B) was measured fifteen times for three days at rest. We double-checked the accuracy of the device with a Universal Testing Machine. Output signals from the Universal Testing Machine and the measuring device were compared. Regression analysis showed high linearity between these two signals. In vivo test, no significant differences were found between measurements. Conclusion: This device has shown to he capable of producing reliable and reproducible results in measuring proximal tooth contact. Therefore, it was considered that this device was appropriate to apply clinically.

• 한국통신학회논문지
• /
• 제16권12호
• /
• pp.1336-1347
• /
• 1991

I본 논문에서는 ISDN(Integrated Services Digital Network)환경에서 PC(Personal Computer)를 상호 연결하여 컴퓨터 간에 정보를 교환하여 패킷 통신망을 구현하기 위하여 ISDN 패킷 단말기용 PC 접속기를 설계하고 구현하였다. ISDN 패킷 단말기용 PC 접속기는 ISDN 계층 1기능과 ISDN 계층 2기능을 수행하는 S 인터페이스 처리부와 X.25에 서비스를 제공하며, X.25는 패킷 모드에서 수행하는 터미널을 위해 DTE(Data Terminal Equipment)와 DCE(Data Circuit Terminating Equipment)간의 접속을 규정하고 있다. S 인터페이스 처리부는 AMD사의 Am79C30칩을 사용하였으며, ISDN 패킷 처리부는 D 채널에 AMD 사의 AmZ8038의 FIFO(First Out)칩을 사용하였으며, D채널의 전반적인 신호절차 제어를 위해 인텔사의 8086 마이크로세서를 사용하였다. S 인터페이스 처리부는 ISDN 계층 1,2로 구성되어 있으며, 계층 간 통신을 위해 메일박스(mail box)를 사용하였다. ISDN 패킷 처리부는 X.25 레벨에서 모듈별로 구성되어 있으며, S 인터페이스 처리부와 ISDN 패킷 처리부 간 통신을 위하여 인터페이스 제어기를 사용하였다.

• 한국분말재료학회지
• /
• 제11권6호
• /
• pp.462-466
• /
• 2004

The bi-materials composed of $Al-5wt{\%}Mg$ and its composite reinforced with SiC particles were prepared by ball-milling and subsequent sintering process. The size of powder in Al-Mg/SiCp mixture decreased with increasing ball-milling time, it was saturated above 30 h when the ball and powder was in the ratio of 30 to 1. Both $Al-5wt{\%}Mg$ powders mixture and $Al-5wt{\%}Mg/SiCp$ mixture were compacted under a pressure of 350MPa and were bonded by sintering at temperatures ranging from 873K to 1173K for 1-5h. At 873k, the sound bi-mate-rials could not be obtained. In contrast, the bi-materials with the macroscopically well-bonded interface were obtained at higher temperatures than 873K. The length of well-bonded interface became longer with increasing temperature and time, indicating the improved contact in the interface between unreinforced Al-Mg part and Al-Mg/SiCp composite part. The relative density in the bi-materials increased as the sintering temperature and time increased, and the bi-materials sintered at 1173K for 5h showed the highest density.

• Fisheries and Aquatic Sciences
• /
• 제2권2호
• /
• pp.172-175
• /
• 1999

Relative DNA contents in some harmful algae were measured using DAPI staining and image analysis system. This method was useful to identify some morphologically similar species and isolates from harmful algal blooms (HABs). In exponential phase, Prorocentrum micans had higher relative DNA content (RD) of $1.83\pm0.52$ than any other isolates, followed by Cochlodinium polykrikoides $(1.10\pm0.46)$ Alexandrium tamarense $(0.93\pm0.32)$ Gyrodinium impudicum $(0.56\pm0.17)$, Scrippsiella trochoidea $(0.41\pm0.26)$ and P. minimum$(0.05\pm0.01)$. When they were fixed with Lugol's solution, it was difficult to d,iscern C. polykrikoides from G. impudicum under the light microscope, but the DNA contents were quite different in two species. C. polykrikoides contained about twice as much RD as G. impudicum under the same culture conditions and exponential phase. DAPI­stained DNA feature in C. polykrikodes showed concentrated in the peripheral part of the cell, but in G. impudicum showed a compact structure in the central part. Although A. tamarense and S. trochoidea were morphologically similar under the light microscope, nuclear DNA content of A. tamarense was twice as much as that of S. trochoidea.

• 한국멀티미디어학회논문지
• /
• 제19권3호
• /
• pp.548-556
• /
• 2016

Integral imaging is an auto-stereoscopic display method that can produce 3D image of a finite viewing window through an array of micro elemental lenses. Integral imaging requires the pickup part of each elemental images acquisition and display part of reconstruction of the images. The successful reconstructed image depends on various parameters such as distance between lens arrays and display device, focal length of lenses, and a number of the array. In this paper, we present reconstruction emulator for display of Integral imaging in order to adjust parameters for 3D contents reconstruction and to observe the result from different configuration. Especially, we provide the user interface for the emulator to control the distance easily. We have confirmed through various experiments that the emulator adjusted the distance and could check error in the process of creating elemental images.