• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1997년도 춘계학술대회 논문집
• /
• pp.842-846
• /
• 1997

Micro-hole drilling (holes less than 0.5 mm in diameter with aspect ratios larger than 10) is gaining increased attention in a wide spectrum of precision production industries. Alternative methods such as EDM, laser drilling, etc. can sometimes replace mechanical micro-hole drilling but are not acceptable in PCB manufacture because they yield inferior hole quality and accuracy. The major difficulties in micro-hold drilling are related to wandering motions during the inlet stage, high aspect ratios, high temperature,etc. However, of all the difficulties, the most undesirable one is the increase of drilling force as the drill penetrates deeper into hold. This is caused mainly by chip related effects. Peck-drilling is thus widely used for deep hole drilling despite the fact that it leads to low productivity. Therefore, in this paper, a method of cutting force regulation is proposed to achieve continuous drilling. A proportional plus derivative (PD) and a sliding modecontrol algorithm will be implemented for controlling the spinle rotational frequeency. Experimental results will show that sliding mode control reduces the nominal cutting force and its variation better than the PD control, resulting in a number of advantages such as an increase in drill life, fast stabilization of the wandering motion, and precise positioning of the hole.

• 한국CDE학회논문집
• /
• 제8권2호
• /
• pp.115-121
• /
• 2003

A new Layered Manufacturing(LM) system, named PaperMill, is developed applying micro milling technology. A micro endmill(127 11m in diameter) is introduced as the cutter of build material. The selected build material for this system is an adhesive-coated paper roll which provides advantages such as good bonding between layers, machinability, and low material cost. A 3-axis CNC controller and three step-motors are used for the movement of X-Y-Z table of the system. For simplicity of the control of mechanism, the control system for feeding the paper roll is uncoupled from CNC controller. Two code converters are developed for the toolpath generation of the new LM system. The NC converter generates a set of NC codes for PaperMill using commercial CAM software while the SML converter generates an NC code from Quickslice's SML format. The NC codes generated from the converters consist of a series of profile data and trigger code for paper feeding. Two sample gears were fabricated to prove the concept of the system, which shown that the dimensional errors of the fabricated gears is under 3.4 percent.

• 조명전기설비학회논문지
• /
• 제19권7호
• /
• pp.73-80
• /
• 2005

직립보행로봇은 동적인 시스템 구현을 위해 에너지원과 제어장치부가 로봇에 탑재되어야 한다. 때문에 본 연구에서는 소형에서 높은 기동 토크를 얻을 수 있는 직류전동기를 선택하였다. 직류전동기 서보시스템에는 아날로그 처리방식의 파워앰프를 이용하여, 제어기와 구동기가 일체화된 하나의 모들로 개발하였다. 이를 로봇액추에이터에 적용하고 동작과 복귀시의 응답특성을 연구하였다. 주 제어부는 PIC(Micro controller)를 채용하여 서보시스템과 함께 소형경량으로 로봇에 탑재할 수 있다.

• 디지털산업정보학회논문지
• /
• 제8권1호
• /
• pp.9-15
• /
• 2012

Multiple convenience features have been getting installed in recently released cars. However, the control of them has many uncomfortable matters yet. To resolve them, it is needed to study how to use easier the convenience features and control them remotely. Currently, wide range of convergence services are being released in various industries by using smartphone and smartphones with its state-of-the-art functions also are being released. In this paper, we design and implement smartphone-based applications for controling the vehicle's convenience features to control the vehicle convenience features with smartphone. To do this, we configure CAN (Controller Area Network) communication between the vehicle's various convenience features, and establish MCU (Micro Controller Unit) to control each feature. We also connect between the MCU and smartphones to make them available for the remote control. We can control lights, turn signals, audio, windows, air conditioner, and so on with the implemented smartphone-based control service of vehicle's convenience features using CAN remotely.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2004년도 춘계학술대회 논문집
• /
• pp.27-33
• /
• 2004

Electro-theological fluid is recently used for the micro polishing of 3-dimensional micro-aspherical lens. It's also used for polishing small area defects on the wide flat wafer. Since ER fluid shows a behavior of viscosity changing under certain electric fields. micro polishing efficiency may be enhanced for certain cases. In this paper, a perfluorinated carbonyl fluoride oil based ER fluids was used to improve surface polishing rate and submicron-scale accuracy. As the polishing electrodes, micro size cylindrical tools had been used for maximizing the electric field. An experimental device, which was applied for micro polishing a number of wafers of 4inches in size and other workpiece. was made on a precision polishing system. It consisted of a steel electrode. a wafer fixture. l0㎃ current and DC 5㎸ power supply unit, and a controller unit. From the Experiments. the ER fluid is applicable for micro polishing of small parts.

• 한국통신학회논문지
• /
• 제13권6호
• /
• pp.370-479
• /
• 1988

GRAFCET로 기술된 병렬 시퀀스를 갖는 순서논리 시스템을 실현하는 microprogrammable sequential controller의 실현방법을 제시했다. 제시된 콘트롤러는 처리속도 및 가변성의 향상과 ROM 프로그래밍을 용이하게 할 수 있도록 구성되었다. 또한 병렬 시퀀스를 처리할 수 있으므로 제어시스템의 효율을 향상시킬 수 있다. 따라서 많은 입출력 변수를 갖는 industial process나 빠른 처리속도를 요하는 power electronic converter등의 콘트롤러 실현에 적합하다.

• 한국통신학회논문지
• /
• 제13권6호
• /
• pp.470-470
• /
• 1988

GRAFCET로 기술된 병렬 시퀀스를 갖는 순서논리 시스템을 실현하는 microprogrammable sequential controller의 실현방법을 제시했다. 제시된 콘트롤러는 처리속도 및 가변성의 향상과 ROM 프로그래밍을 용이하게 할 수 있도록 구성되었다. 또한 병렬 시퀀스를 처리할 수 있으므로 제어시스템의 효율을 향상시킬 수 있다. 따라서 많은 입출력 변수를 갖는 industial process나 빠른 처리속도를 요하는 power electronic converter등의 콘트롤러 실현에 적합하다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2001년도 학술대회 논문집 전문대학교육위원
• /
• pp.100-102
• /
• 2001

This paper resents digital controller of emergency power generator system. The controller offers an integrated alternative for Genset control, metering and remote monitoring. Proposed controller used 80c196kc one chip microprocessor for digital control, it measures parameters of generator and provides output signals to control starting and stopping of generator. Additionally protection and alarm functions are considered to system stability. As almost parts of controller are embedded by digital microprocessor and FPGA techniques, the controller has a more flexible feature and an improvement of precision. The developed system has a big merit economically and is suitable for any kW size generator.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 춘계학술대회논문집B
• /
• pp.146-151
• /
• 2001

The Grand-Touring is a game motion simulator that simulates the race-car driving motion with three hydraulic cylinders which connect the platform and base in parallel. Its motion control system consists of the PC-based main controller and micro-controller based sub-controller. The former one process the dynamic image of race-car in response to the driver's action and computes the reference command for each cylinder and the latter one is designed for the tracking control of hydraulic cylinder and interfacing the auxiliary signals between various sensors/actuator and main controller. In this research, we developed the sub-controller that implements the required functions of Grand-Touring and prove the overall performance with experiments.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2001년도 하계학술대회 논문집
• /
• pp.515-518
• /
• 2001

In this study, the electric door lock using the password input system for security improvement was fabricated. The security has been improved by using the multiple micro process. The controller with solenoid valve has been designed indirect driving system for releasing the door lock system. Also, the self checkup system for improving the trustworthy was developed with two kinds of micro process. The results will be applied IC card system and fingerprint identification system for security improvement.