• Proceedings of the KIEE Conference
• /
• 2007.07a
• /
• pp.555-556
• /
• 2007

This paper proposes a new concept's IDSFHA(Intelligent Digital Switchgear For Home Automation) which can obtain the safety, the reliability and the easy to correspond to the request of the general electric customer or electric power company under the ubiquitous-based home automation environments The IDSFHA is designed by analyzing their requirement functions, a 32-bit micro processor is adopted as main controller to support efficiently the designed functions. The single phase power IC(ADE7753) is utilized to collect the electric power information, and makes it possible to communicate as internet among the IDSFHA and their using the ethernet convertor. In the proposed IDSFHA, the several functions are implemented such as the earth leakage level display and waveform transmitting, the electric power using fee display, voltage management, load management and load control function. Finally, the prototype of the IDSFHA is made experimently based on the designed results.

• Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference
• /
• 2006.05a
• /
• pp.103-107
• /
• 2006

In this paper, the dimmable electronic ballast for the 250W metal halide lamp was realized by three stage structure. We developed stable the dimming ballast by using a Micro-controller, and measured the output wattage in the dimming range(illumination) from 100% to about 20%. Under the 35% dimming level, it is possible to cause the redution of lamp's life. The dimming performance can reduce the light system's wattage but can reduce the luminance efficiency (lux/watt).

• Proceedings of the KIPE Conference
• /
• 2014.07a
• /
• pp.313-314
• /
• 2014

본 논문에서는 태양광 마이크로 인버터의 PV 입력단에서 발생하는 리플을 저감하기 위한 충방전용 양방향 플라이백 컨버터의 제어기 설계를 제안한다. 기존 시스템에서는 PV 입력단의 리플을 제거하기 위해 고용량의 전해커패시터를 사용해왔다. 하지만 전해커패시터는 수명이 짧기 때문에 시스템의 신뢰성이 저하되고, 부피를 증가시킨다. 본 시스템의 구조는 태양광 마이크로 인버터의 PV 입력단에 전해 커패시터를 사용하지 않고 리플저감을 위한 양방향 플라이백 컨버터를 shunt방식으로 연결함으로써 리플을 제거하고 수명을 연장시키고 시스템을 안정시킬 수 있는 구조이다. 본 논문에서는 PV 입력단에서 발생하는 120Hz 리플을 제거하고 양방향 플라이백 컨버터의 안정적인 동작을 구현하기 위한 제어기를 설계한다.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2007.11a
• /
• pp.356-357
• /
• 2007

In this paper, we developed an integrated miniaturized device which acquires and transmits the signal of ECG an interested heartbeat and body's temperature and humidity. Using an amplifier circuit on the electrodes and the radio frequency transmission, the developed system dispenses with the use of cables among the electrodes, amplifier, and the post processing system. The sensor signals are transmitted to the RF-wireless terminal that was developed using the micro controller Aduc812, LCD, RF-module (frequency 424MHz, 9600-bps). In results, the developed system improves not only the signal-to-noise ration in dynamic ECG & and body's temperature and humidity measurement, but also the user convenience.

• Proceedings of the KIEE Conference
• /
• 2007.07a
• /
• pp.1908-1909
• /
• 2007

The design of an intelligent toothbrush, capable of monitoring brushing motion, orientation through the grip axis, during toothbrushing is described. Inappropriate Toothbrushing styles, even in adults, sometimes cause dental problems, cavities, gingivitis, etc. This smart system provides user to monitor his or her brushing pattern using accelerometer and magnetic sensors for evaluation of toothbrushing style. Directional information of toothbrush with respect to earth's magnetic field and activity data were measured by a miniaturized low-power micro- controller, MSP430 and transmitted to personal computer by 2.4GHz radio transmitter, nRF2401. A personal computer provides an on-line display of activity and orientation measurements during toothbrushing. The signal trace is then analyzed to extract clinically relevant measurement. This preliminary study showed that the proposed monitoring system was conceived to aid dental care personnel in patient education and instruction in oral hygiene regarding brushing style.

• Proceedings of the Korea Multimedia Society Conference
• /
• 2004.05a
• /
• pp.741-744
• /
• 2004

원격 교육시스템의 구현은 인터넷의 기술의 급격한 발전과 함께 활발하게 연구가 진행 되고 있다. 공학 분야에서 원격 교육시스템을 구현하는데 가장 큰 제약사항은 하드웨어의 제어이다. 본 연구에서는 8051 원격 컴파일 시스템을 구현하였으며, 시스템의 구성은 학습자가 웹에서 8051실습 키트를 직접 제어해보며 학습하도록 할 것이다. 학습자는 C언어와 어셈블리어로 8051제어 소스를 작성하고 작성된 소스 파일을 서버에 업로드 하여 컴파일 및 링크할 수 있다 이 과정을 통해 생성된 실행파일을 서버에 연결되어있는 8051 실습키트에 다운로드하여 실행하도록 구현하였다. 또한, 실링 결과의 확인은 웹 카메라를 통해 학습자의 PC에 영상데이터를 전송하여 8051키트의 동작을 학습자들이 확인하게 된다.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2015.04a
• /
• pp.1075-1077
• /
• 2015

최근 마이크로 컨트롤러를 활용한 사물인터넷의 분야가 급격하게 증가하면서, 이를 활용한 헬스케어 분야에 대한 관련 연구 역시 활발하게 진행되고 있다. 마이크로 컨트롤러를 활용한 헬스케어 시스템 장치의 장점 중 하나는, 사용자가 스스로의 건강관리를 위해 일상생활에서의 습관이나 행동 양식을 손쉽게 확인할 수 있다는 점이다. 제안한 시스템은 가벼운 수면장애를 갖고 있는 사용자를 대상으로 실제 수면 환경에서의 뇌파를 측정 및 분석하여 수면 환경 내의 빛 환경을 자동으로 제어할 수 있도록 하였다.

• Advances in robotics research
• /
• v.1 no.1
• /
• pp.1-19
• /
• 2014

Microgripper is an essential device in the micro-operation system. It can convert other types of energy into mechanical energy and produce clamp movement with required chucking force, which enables it a broad application prospect in the domain of tiny components' processing and assembly, biomedicine and optics, etc. The performance of a microgripper is dependent on its power supply, type of drive, mechanism structure, sensing components, and controller. This paper presents a state-of-the-art survey of recent development on flexure-based microgrippers. According to the drive type, the existing microgrippers can be mainly classified as electrostatic microgripper, electrothermal microgripper, electromagnetic microgripper, piezoelectric microgripper, and shape memory alloy microgripper. Additionally, some different mechanisms, sensors, and control methods that are used in microgripper system are reviewed. The key issue of how to choose those components in microgripper system design is also addressed.

• Journal of the Korea Safety Management & Science
• /
• v.17 no.3
• /
• pp.363-370
• /
• 2015

In this paper, the control technique of the stepping motor using back electromotive force(B-EMF) without encoder is investigated. The stepping motor generally uses the rotary encoder to detect the rotor position. Since this method increases the cost and the motor configuration size, the new closed-loop control method applied for the B-EMF was implemented by using current detect circuit, AD-converter, and micro controller unit(MCU). The control loop of stepping motor became very simplified. The current change of stepping motor measured by the amplifier was measured and analyzed, when the missing step is occurred. Based on the data from current feedback, position errors were compensated and confirmed by using AD-converter.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2009.10a
• /
• pp.488-489
• /
• 2009

In this paper, a FlexRay module and gateway is developed for high speed in-vehicle network. Speed of FlexRay is 10 times higher than that of CAN. In this paper, FlexRay module is implemented using MC9S12XF512 micro-controller and gateway converting CAN message to FlexRay message.