• The Journal of the Korea institute of electronic communication sciences
• /
• v.14 no.5
• /
• pp.871-876
• /
• 2019

We fabricated concave optical fiber tips using hydrofluoric acid solution and photothermal effect induced by $1.55{\mu}m$ wavelength laser applied to an optical fiber. The radius of curvature of the concave optical fiber tips fabricated with different applied laser power, etching time, and concentration of hydrofluoric acid was measured with an optical microscope. Then, we analyzed how the radius of curvature changes for those three variables. In addition, the reliability of the measurement method using a microscope was verified through a free spectral range(FSR) and a scanning electron microscope(SEM). Through this paper, the radius of curvature can be adjusted by the variables of the fabrication process of concave optical fiber tips; thus, it is overcoming the limitations of conventional optical fiber etching methods using hydrofluoric acid solutions.

• The Korea Journal of Herbology
• /
• v.33 no.3
• /
• pp.11-18
• /
• 2018

Objectives : Saururus chinensis and Houttuynia cordata (Saururaceae) are perennial herbs using for medicinal purposes in Korea. The objectives of this study are to compare anatomical key characters between two medicinal plants and to provide fundamental information for the identification of two herbal medicines by using anatomical features. Methods : Cross-sections of root, rhizome, stem, petiole, and leaf for each species were observed in this study. Materials were analyzed through dehydration, paraffin embedding and micro-sectioning, and double staining with Safranin O and Fast-Green FCF. Observations of permanent preparation were conducted using light microscope. Results : S. chinensis and H. cordata were distinguished with anatomical differentiations; Idioblasts with essential oil were scattered in the parenchyma cell of cortex, pith, and phloem of S. chinensis, on the other hand, in H. cordata, idioblasts were distributed ring-shaped in the cortex of the root. S. chinensis had two cycles of vascular bundles in the stem while H. cordata had one cycle. Hypodermis layer was conspicuous in a stem of H. cordata, crystals were observed the only parenchyma in a stem of S. chinensis, and epidermal oil cells were developed in the epidermis of H. cordata. S. chinensis had air cavity at the cortex and pith of the stem. The shape of cross-section was polygonal in the stem of S. chinensis and was circular in the stem of H. cordata. Conclusions : We investigated anatomical study of Korean S. chinensis and H. cordata. To identify two herbal medicines, we considered main anatomical features and provided identification key here.

• Journal of Periodontal and Implant Science
• /
• v.52 no.4
• /
• pp.325-337
• /
• 2022

Purpose: The aim of this study was to investigate the effect of (1) the size of the bony access window and (2) collagen membrane coverage over the window in sinus floor elevation in a rabbit sinus model. Methods: Small bony access windows (SW; ø 2.8 mm) were made in 6 rabbits and large windows (LW; ø 6 mm) in 6 other rabbits. Both sinuses in each rabbit were allocated to groups with or without coverage of a collagen membrane (CM) on the window, resulting in 4 groups: SW, LW, SW+CM, and LW+CM. After 4 weeks of healing, micro-computed tomographic, histologic, and histomorphometric analyses were performed. Results: Bony healing in the window area was incomplete in all groups, but most bone graft particles were well confined in the augmented cavity. Histologically, the pattern of new bone formation was similar in all groups. Histomorphometrically, the percentage of newly formed bone was greater in the groups with CM than in the groups without CM, and in the groups with SW than in the groups with LW (12.92%±6.40% in the SW+CM group, 4.21%±7.73% in the SW group, 10.45%±4.81% in the LW+CM group, 11.77%±3.83% in the LW group). The above differences were not statistically significant (P>0.05). Conclusions: The combination of a small bony access window and the use of a collagen membrane over the window favored new bone formation compared to other groups, but this result should be further investigated due to the limitations of the present animal model.

• Restorative Dentistry and Endodontics
• /
• v.46 no.4
• /
• pp.56.1-56.11
• /
• 2021

Objectives: This study evaluated 2 nickel-titanium rotary systems and a complementary protocol with an ultrasonic tip and a small-diameter instrument in flattened root canals. Materials and Methods: Thirty-two human maxillary second premolars with flattened canals (buccolingual diameter ≥4 times larger than the mesiodistal diameter) at 9 mm from the radiographic apex were selected. The root canals were prepared by ProDesign Logic (PDL) 30/0.01 and 30/0.05 or Hyflex EDM (HEDM) 10/0.05 and 25/0.08 (n = 16), followed by application of the Flatsonic ultrasonic tip in the cervical and middle thirds and a PDL 25/0.03 file in the apical third (FPDL). The teeth were scanned using micro-computed tomography before and after the procedures. The percentage of volume increase, debris, and uninstrumented surface area were analyzed using the Kruskal-Wallis, Dunn, Wilcoxon, analysis of variance/Tukey, and paired and unpaired t-tests (α = 0.05). Results: No significant difference was found in the volume increase and uninstrumented surface area between PDL and HEDM (p > 0.05). PDL had a higher percentage of debris than HEDM in the middle and apical thirds (p < 0.05). The FPDL protocol resulted in less debris and uninstrumented surface area for PDL and HEDM (p < 0.05). This protocol, with HEDM, reduced debris in the middle and apical thirds and uninstrumented surface area in the apical third (p < 0.05). Conclusions: High percentages of debris and uninstrumented surface area were observed after preparation of flattened root canals. The HEDM, Flatsonic tip, and 25/0.03 instrument protocol enhanced cleaning in flattened root canals.

• Proceedings of the KACD Conference
• /
• 2008.05a
• /
• pp.246-257
• /
• 2008

The purpose of this study was to investigate the influence of various occlusal loading sites and directions on the stress distribution of the cervical composite resin restorations of maxillary second premolar, using 3 dimensional (3D) finite element (FE) analysis. Extracted maxillary second premolar was scanned serially with Micro-CT (SkyScan1072; SkyScan, Aartselaar, Belgium). The 3D images were processed by 3D-DOCTOR (Able Software Co., Lexington, MA, USA). HyperMesh (Altair Engineering. Inc., Troy, USA) and ANSYS (Swanson Analysis Systems. Inc., Houston, USA) was used to mesh and analyze 3D FE model. Notch shaped cavity was filled with hybrid (Z100, 3M Dental Products, St. Paul, MN, USA) or flowable resin (Tetric Flow, Viva dent Ets., FL-9494-Schaan, Liechtenstein) and each restoration was simulated with adhesive layer thickness ($40{\mu}m$). A static load of 200 N was applied on the three points of the buccal incline of the palatal cusp and oriented in $20^{\circ}$ increments, from vertical (long axis of the tooth) to oblique $40^{\circ}$ direction towards the buccal. The maximum principal stresses in the occlusal and cervical cavosurface margin and vertical section of buccal surfaces of notch-shaped class V cavity were analyzed using ANSYS. As the angle of loading direction increased, tensile stress increased. Loading site had little effect on it. Under same loading condition. Tetric Flow showed relatively lower stress than Z100 overall, except both point angles. Loading direction and the elastic modulus of restorative material seem to be important factor on the cervical restoration.

• Restorative Dentistry and Endodontics
• /
• v.33 no.3
• /
• pp.246-257
• /
• 2008

The purpose of this study was to investigate the influence of various occlusal loading sites and directions on the stress distribution of the cervical composite resin restorations of maxillary second premolar, using 3 dimensional (3D) finite element (FE) analysis. Extracted maxillary second premolar was scanned serially with Micro-CT (SkyScan1072; SkyScan, Aartselaar, Belgium). The 3D images were processed by 3D-DOCTOR (Able Software Co., Lexington, MA, USA). HyperMesh (Altair Engineering, Inc., Troy, USA) and ANSYS (Swanson Analysis Systems, Inc., Houston, USA) was used to mesh and analyze 3D FE model. Notch shaped cavity was filled with hybrid (Z100, 3M Dental Products, St. Paul, MN, USA) or flowable resin (Tetric Flow, Vivadent Ets., FL-9494-Schaan, Liechtenstein) and each restoration was simulated with adhesive layer thickness ($40{\mu}m$). A static load of 200 N was applied on the three points of the buccal incline of the palatal cusp and oriented in $20^{\circ}$ increments, from vertical (long axis of the tooth) to oblique $40^{\circ}$ direction towards the buccal. The maximum principal stresses in the occlusal and cervical cavosurface margin and vertical section of buccal surfaces of notch-shaped class V cavity were analyzed using ANSYS. As the angle of loading direction increased, tensile stress increased. Loading site had little effect on it. Under same loading condition, Tetric Flow showed relatively lower stress than Z100 overall, except both point angles. Loading direction and the elastic modulus of restorative material seem to be important factor on the cervical restoration.

• Clinical and Experimental Reproductive Medicine
• /
• v.35 no.4
• /
• pp.275-283
• /
• 2008

Objective: This study was conducted to investigate the effects of the artificial shrinkage and assisted hatching (PZD; patial zona dissetion) before vitrification on the development of vitrified mouse expanding blastocyst. Methods: Mouse 2-cell embryos were collected and cultured in G1.1 and G2.2 to expanding blastocyst. For artificial shrinkage (AS) the micro injection pipette was inserted into blastocoele cavity and blastocoele fluid was aspirated. For assisted hatching (AH) PZD method was used. Control group was -AS/-AH and treatment groups were -AS/+AH, +AS/-AH and +AS/+AH. After AS and AH mouse blastocysts were equillibrated in G10 and G10E20 for 3 mins, respectively, and vitrified in G25E25 after loading on capped pulled-straw. Vitrified mouse blastocysts were thawed and cultured for 24 hrs. The survival and hatching rate was compared among one control and three treatment groups. Results: The survival rates were 99%, 92% in +AS/+AH and +AS/-AH groups and 54%, 58% in -AS/-AH and -AS/+AH group, respectively. The survival rate was significantly higher in +AS group than in -AS group (p<0.01). Hatching rates were 34%, 96% in -AS/-AH and -AS/+AH groups and 41%, 100% in +AS/-AH and +AS/+AH, respectively. The hatching rates was higher in +AH group than in -AH group (p<0.01). After thawing recovery rates were 100%. Loading on capped pulled-straw, that is effective and useful method on vitrification. Conclusion: This study showed that artificial shrinkage of blastocoele cavity and assisted hatching (PZD) significantly improved the development of the vitrified mouse expanding blastocysts.

• Journal of the Korean Wood Science and Technology
• /
• v.34 no.2
• /
• pp.68-77
• /
• 2006

The heartwood of cengal (Neobalanocarpus heimii) is known to have a high degree of decay resistance by virtue of its high extractive content. After 30 years in ground contact an utility pole of this tropical hardwood was found to be degraded only in the surface layers by cavity-forming soft rot fungi. The present work was undertaken 1) to characterize the degradation of cengal heartwood from the aspect of ultrastructure and chemistry and 2) to investigate the correlation between soft rot decay and its extractive microdistribution in wood tissues. The chemical analysis of cengal heartwood revealed the presence of a high amount of extractives as well as lignin. The wood contained a relatively high amount of condensed lignin and the guaiacyl units. Microscopic observations revealed that vessels, fibers and parenchyma cells (both ray and axial parenchyma) all contained extractives in their lumina, but in variable amounts. The lumina of fibers and most axial parenchyma were completely or almost completely filled with the extractives. TEM micrographs showed that cell walls were also impregnated with extractives and that pit membranes connecting parenchyma cells were well coated and impregnated with extractives. However, fungal hyphae were present in the extractive masses localized in cell lumina, and indications were that the extractives did not completely inhibit fungal growth. The extent of cell wall degradation varied with tissue types. The fibers appeared to be more susceptible to decay than vessels and parenchyma. Middle lamella was the only cell wall region which remained intact in all cell types which were severely degraded. The microscopic observations suggested a close correlation between extractive microdistribution and the pattern and extent of cell wall degradation. In addition to the toxicity to fungi, the physical constraint of the extractive material present in cengal heartwood cells is likely to have a profound effect on the growth and path of invasion of colonizing fungi, thus conferring protection to wood by restricting fungal entry into cell walls. The presence of relatively high amount of condensed lignin is also likely to be a factor in the resistance of cengal heartwood to soft rot decay.

• The korean journal of orthodontics
• /
• v.24 no.3 s.46
• /
• pp.659-672
• /
• 1994

Dental caries is one of the most prevalent dental diseases in Korea and its prevention is very important in orthodontic therapy. For the cleansing action of saliva itself and/or tooth-brushing is lowered in patient with fixed orthodontic appliance, oral hygiene of the patient becomes worse, which provides more favorable environment for micro-organisms. Chlorhexidine, one of the series of bisguanide, has been reported to be strong antimicrobial agent and very effective on Streptococcus mutans. The purpose of this study is to evaluate the possibility of chlorhexidine as a anticariogenic agent in fixed orthodontic therapy. We used the varnish containing chlorhexidine as a main ingredient for the chemical control of salivary S.mutans in patients with fixed appliance therapy We applied the varnish containing chlorhexidine on the labial and interproximal surface of the teeth before bonding and banding teeth of our patients(N=20) and compared to control group patients(N=20). Before the application of chlorhexidine varnish and four times periodically after the completion of fixed appliance set-up, we sampled saliva of both group patients and incuvate S.mutans for 24 hours. In the culture study of sampled saliva, counting the number of S.mutans colonies, we founded as follows : 1. In patients with fixed appliance therapy, the risk of dental caries increase when it compared to that of preorthodontic treatment ; The number of salivary S.mutans increase in Patient's oral cavity. 2. The experimental agent that contain chlorhexidine is effective to reduce the number of salivary S.mutans. 3. For the effect of this agent is not ever-lasting, periodical application is needed, and additional study for economical interval and number of application is needed.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.37 no.2
• /
• pp.13-21
• /
• 2000

Au-black for the application of the long wavelength infrared absorber has been prepared by evaporating Au under nitrogen gas-filled low vacuum condition. Characteristics of the deposited Au-black were carefully investigated through structural analysis, infrared absorbance measurement, and patterning of the layer, all of which are dependent on the deposition condition. High density of micro-cavity that trapped infrared were obtained, and infrared absorbance in the wavelength range from 3 $\mu\textrm{g}$ to 14 $\mu\textrm{g}$ was found to be about 90% when the Au-black layer was produced under the deposition condition of mass Per area of about 600 $\mu\textrm{g}$/cm$^{2}$ and chamber pressure of above 1 Torr. Photoresist lift-off process could be performed to pattern the Au-black, of which mass per area was below 900 $\mu\textrm{g}$/cm/ sup 2/. In view of absorbance, heat capacity, and pattern formation, the deposition condition of chamber pressure of about 1 Tow and mass per area of about 600$\mu\textrm{g}$/cm$^{2}$ was most adequate for preparing the Au-black as an infrared absorber.