• Journal of Institute of Control, Robotics and Systems
• /
• v.22 no.6
• /
• pp.470-476
• /
• 2016

This paper proposes a practical algorithm for the reduction of measurement errors due to drift in a micro-electromechanical system (MEMS) gyros that are used for a mobile robot. Any drift in a MEMS gyro will cause an unbounded growth of errors in the estimation of heading, which makes it nearly useless in applications that require high accuracy over a long operating time. In proposed method, maneuvers of a cleaning robot are observed through encoders' measurement process and a decision to correct bias drift will be made if necessary. The method used in this paper is called the "heading estimation filter". To evaluate the accuracy of the proposed method, a comparison was made between the estimation of the heading of the cleaning robot and one from a motion capture system.

• Journal of Institute of Control, Robotics and Systems
• /
• v.16 no.3
• /
• pp.245-248
• /
• 2010

Almost all of control schemes proposed so far have been designed in the continuous-time domain theoretically. Actual systems, however, have been implemented in the discrete-time domain since Micro Control Unit(MCU) and/or microprocessors have been used for the controllers. Thus, the overall system turned to be a sampled-data system, and generally speaking, the ultimate error cannot converge to zero in the actual system even though the proposed control algorithm showed the asymptotic stability in the continuous-time domain. In this paper, therefore, the ultimate error bound of a sampled data system with a short sampling period has been investigated. The ultimate error is shown to be related in the sampling period.

• Journal of Institute of Control, Robotics and Systems
• /
• v.12 no.9
• /
• pp.912-917
• /
• 2006

A strain gauge weight measuring instrumentation system was designed with RF sensor network facilities. In the sensor module system data conversion and a series of signal processing were totally equipped. 16 strain gauges are incoming sensors and each output of the strain gauge was amplified and filtered for proper analog signal processing. Several measuring instrumentation OP amps and general purposed OP amps were used. 12 bits A/D converters converted analog signals to digital bits and a PIC microprocessor controlled the 16 channels of strain gauges. RF RS232 modules were used for wireless communication between the PIC microprocessor and an Ethernet host far a remote sensor monitoring system development.

• Journal of the Korea Institute of Building Construction
• /
• v.20 no.6
• /
• pp.577-584
• /
• 2020

Construction automation and robotics have been widely adopted in the construction industry as a promising solution to such issues like a shortage of skilled labor and the difficulties workers face in harsh working environments. The analysis of the knowledge structure and its evolution from the existing articles helps identify essential knowledge elements and possible future research directions. This study attempts to (1) construct keyword networks from the papers published in the International Symposium on Automation and Robotics in Construction (ISARC), (2) investigate how keywords and keyword communities are associated with each other, and (3) examine the changes in the crucial keywords over time. Through cluster analysis, 79 keywords were categorized into four groups (BIM, Building construction, Sensing, and GPS as representative keywords) with similar structural positions. Research trends show that research themes related to Infrastructure, Construction equipment, and 3D have consistently received a large amount of attention, regardless of geographical region. Research on as-built status model utilization through BIM and Laser scanning and improving Energy performance is taking place more frequently. In contrast, research studies related to problem-solving based on Neural networks are not as common as previously. This study provides useful insights into the construction automation field, at both the macro and micro levels.

• 제어로봇시스템학회:학술대회논문집
• /
• 1997.10a
• /
• pp.621-624
• /
• 1997

This paper presents the design procedure for soccer-playing rovots based on the centralized approach. Using a fast vision system, we obtain the configuration of each robot and then the host computer computes the desired motion and commands each robot directly via RF communication. The robot soccer game has a lot of problems such as obstacle avoidance, coordination between robots, dribbling the ball, and so on. To implement such motions, we think that the centralized approach seems to be more powerful than the distributed approach. We describe the technical tips for developing the robots in detail here and explain our strategy for getting the scores.

• 제어로봇시스템학회:학술대회논문집
• /
• 2003.10a
• /
• pp.1105-1108
• /
• 2003

The micro robot soccer playing system is introduced. Studying and learning, evolving in artificial agents are very difficult problem, but on the other hand we think more powerfully challenging task. In our laboratory, this soccer-system studies mainly centered on single agent learning problem. The construction of such experimental system has involved lots of kinds of challenges such as robot designing, vision processing, motion controlling. At last we will give some results showing that the proposed approach is feasible to guide the design of common agents system.

• 제어로봇시스템학회:학술대회논문집
• /
• 2004.08a
• /
• pp.579-581
• /
• 2004

We wish to develop micro-total analysis system (TAS) on a chip, and to make a trial approach to solve the important problem that is to detect ions separated by the electric field. We propose an idea, which is as for rotational motions of dipolar ions, which are affected by the ion atmosphere in outer regions. This is a new kind of the ion-sensitive field effect transistor (ISFET). We wish to develop the ISFET chips, and give more effective, fast and sensitive, capillary electrophoresis is designed in near future.

• 제어로봇시스템학회:학술대회논문집
• /
• 1993.10a
• /
• pp.853-858
• /
• 1993

The error back-propagation(BP) algorithm is widely used for finding optimum weights of multi-layer neural networks. However, the critical drawback of the BP algorithm is its slow convergence of error. The major reason for this slow convergence is the premature saturation which is a phenomenon that the error of a neural network stays almost constant for some period time during learning. An inappropriate selections of initial weights cause each neuron to be trapped in the premature saturation state, which brings in slow convergence speed of the multi-layer neural network. In this paper, to overcome the above problem, Micro-Genetic algorithms(.mu.-GAs) which can allow to find the near-optimal values, are used to select the proper weights and slopes of activation function of neurons. The effectiveness of the proposed algorithms will be demonstrated by some computer simulations of two d.o.f planar robot manipulator.

• 제어로봇시스템학회:학술대회논문집
• /
• 2001.10a
• /
• pp.106.4-106
• /
• 2001

The current research field to find near-optimum solutions explores in a small population, which is coined as Micro-Genetic Algorithms (${\mu}$GAs), with some genetic operators. Just as in the Simple-Genetic Algorithms (SGAs), the ${\mu}$GAs work with encoding population and are implemented serially. The major difference between SGAs and ${\mu}$GAs is how to make reproductive plan for more better searching strategy due to the population choice. This paper is conducted to implement ${\mu}$GAs in order to achieve fast searching for more better evolution and associated cost evaluation in global solution space. To achieve this implementation, the Air-Borne Selection (ABS) for a new reproductive plan is developed as new strategic conception for ${\mu}$GAs. In this paper, it is shown that the ${\mu}$GAs implementation reaches a near-optimal region much earlier than the SGAs implementation. The superior ...

• 제어로봇시스템학회:학술대회논문집
• /
• 2001.10a
• /
• pp.167.3-167
• /
• 2001

In this paper, a single degree-of freedom gimbal-structured micro gyroscope and signal processing part including capacitive sensing circuits and filters are designed, fabricated and experimented. We use capacitive sensing method with excitation signal, i.e. sensing excitation signal, to measure the displacement of the moving plate. So, Sensing Output Signal is modulated twice by the excitation signal and driving signal, which is profitable to decouple the driving and sensing mode, to reduce the effect of the acceleration, and to curtail the noises due to parasitic capacitance and driving signal. To reduce driving noises and to improve linearity, the excitation signals and driving signals are modified. Through frequency response analyses ...