• 멤브레인
• /
• 제31권6호
• /
• pp.426-433
• /
• 2021

본 연구에서는 polyketone (PK)을 이용하여 전기방사 조건에 따른 섬유 형상의 특성 변화와 유수분리 가능성을 확인해 보았다. 고습과 저습 조건에서는 마이크론 직경의 섬유가 형성되었으며, 특히 고습에서는 섬유의 표면이 거칠게 변한 것이 확인되었다. 섬유 직경을 micro에서 nano로 변경하기 위하여 방사용액에 염을 추가하였으며, 그 결과 섬유 직경이 약 90% 감소하는 것을 확인할 수 있었다. 제조된 rPK-LNC와 PK-H로 유수분리 특성을 확인하기 위해 oil/water 에멀션으로 중력 조건에서 유수분리를 진행하였으며 total organic carbon (TOC)와 탁도를 측정하여 특성을 분석하였다. 제거율 확인결과 탁도가 TOC와 동일한 경향성을 나타내는 것이 확인되었다. 따라서 본 연구에서는 고분자의 방사조건과 염의 유무에 따른 분리막의 섬유 형상과 물리적 특성변화와 이를 이용한 유수분리 특성에 대해 연구하였다.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2005년도 ICCAS
• /
• pp.1641-1644
• /
• 2005

Magnetic actuation utilizes the mechanic torque that is the result of interaction of the current in a coil with an external magnetic field. A main obstacle is, however, that torques can only be produced perpendicular to the magnetic field. In addition, there is uncertainty in the Earth magnetic field models due to the complicated dynamic nature of the field. Also, the magnetic hardware and the spacecraft can interact, causing both to behave in undesirable ways. This actuation principle has been a topic of research since earliest satellites were launched. Earlier magnetic control has been applied for nutation damping for gravity gradient stabilized satellites, and for velocity decrease for satellites without appendages. The three axes of a micro-satellite can be stabilized by using an electromagnetic actuator which is rigidly mounted on the structure of the satellite. The actuator consists of three mutually-orthogonal air-cored coils on the skin of the satellite. The coils are excited so that the orbital frame magnetic field and body frame magnetic field coincides i.e. to make the Euler angles to zero. This can be done using a Neural Network controller trained by PD controller data and driven by the difference between the orbital and body frame magnetic fields.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1999년도 하계학술대회 논문집 G
• /
• pp.3307-3309
• /
• 1999

Electrochemical discharge machining (ECDM) is a very recent technique in the fabrication of the micro-electro-mechanical system ( MEMS ) devices. This paper presents the experimental results of the machining of micro-holes on pyrex glass substrates by use of ECDM. Electrolyte is used with a KOH aqueous solution, cathode with copper, anode with platinum, and tool feed system is applied with gravity feed system. Already established experimental results were taken under the condition of constant voltage frequency. However in this paper, the effect of variation of the voltage frequency and duty ratio is considered. In this experiment, it is measured the ECDM performances with variation of the voltage frequency and duty ratio under the conditions of constant other machining variables. ECDM performances are described by the hole depth, and the top hole diameter.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2009년도 제38회 동계학술대회 초록집
• /
• pp.363-363
• /
• 2010

The high capillarity of a plastic fiber network having superhydrophilic Si-DLC coating is studied. Although the superhydrophilic surface maximize wetting ability on the flat surface, there remains a requirement for the more wettable surface for various applications such as air-filters or liquid-filters. In this research, the PET non-woven fabric surface was realized by superhydrophilic coating. PTE non-woven fabric network was chosen due to its micro-pore structure, cheap price, and productivity. Superhydrophobic fiber network was prepared with a coating of oxgyen plasma treated Si-DLC films using plasma-enhanced chemical vapor deposition (PECVD). We first fabricated superhydrophilic fabric structure by using a polyethylene terephthalate (PET) non-woven fabric (NWF) coated with a nanostructured films of the Si-incorporated diamond-like carbon (Si-DLC) followed by the plasma dry etching with oxygen. The Si-DLC with oxygen plasma etching becomes a superhydrophilic and the Si-DLC coating have several advantages of easy coating procedure at room temperature, strong mechanical performance, and long-lasting property in superhydrophilicity. It was found that the superhydrophobic fiber network shows better wicking ability through micro-pores and enables water to have much faster spreading speed than merely superhydrophilic surface. Here, capillarity on superhydrophilic fabric structure is investigated from the spreading pattern of water flowing on the vertical surface in a gravitational field. As water flows on vertical flat solid surface always fall down in gravitational direction (i.e. gravity dominant flow), while water flows on vertical superhydrophilic fabric surface showed the capillary dominant spreading.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2012년도 제38회 춘계학술대회논문집
• /
• pp.416-423
• /
• 2012

액체추진제 공급시스템의 액체포집장치는 추진기관으로 기포가 유입되는 것을 방지하는데 사용한다. 액체포집장치는 차단막의 미세 구멍의 모세관 효과를 이용하여 추진기관에 순수 액체만을 공급한다. 기포점은 액체포집장치의 설계에서 가장 중요한 설계변수이다. 본 논문에서는 문헌조사를 통해 액체포집장치의 성능에 영향을 미치는 변수들을 식별하고 기포점 측정 시험 장치를 구성하였다.

• Journal of Astronomy and Space Sciences
• /
• 제36권3호
• /
• pp.105-113
• /
• 2019

Spectroscopic observations of barium star ${\zeta}$ Capricornus (HD204075) obtained at the 8.2 m telescope of the European Southern Observatory, with a spectral resolving power R = 80,000 and signal to noise ratio greater than 300, were used to refine the atmospheric parameters. We found new values for effective temperature ($T_{eff}=5,300{\pm}50K$), surface gravity ($log\;g=1.82{\pm}0.15$), micro-turbulent velocity ($v_{micro}=2.52{\pm}0.10km/s$), and iron abundance ($log\;N(Fe)=7.32{\pm}0.06$). Previously published abundances of chemical elements in the atmosphere of HD204075 were analyzed and no correlations of these abundances with the second ionization potentials of these elements were found. This excludes the possible influence of accretion of hydrogen and helium atoms from the interstellar or circumstellar environment to the atmosphere of this star. The accretion of nuclear processed matter from the evolved binary companion was primary cause of the abundance anomalies. The young age of HD204075 allows an estimation of the time-scale for the creation of the abundance anomalies arising from accretion of interstellar hydrogen and helium as is the case of stars with low magnetic fields; which we estimate should exceed $10^8$ years.

• 한국지반환경공학회 논문집
• /
• 제13권11호
• /
• pp.61-68
• /
• 2012

지반보강을 위해 국내에서 널리 사용되고 있는 공법으로 앵커공법, 소일네일 공법 및 소구경말뚝 공법 등을 들 수 있다. 상기 공법의 경우 보강재의 시공은 용도에 따라 구분되지만 공통적으로 보강재를 삽입한 후에 그라우팅 작업을 실시하는 공정이 포함되어 있다. 지금까지는 국내 대부분의 경우 중력식 그라우팅으로 시공되고 있지만 중력에 의해 그라우팅을 실시하기 때문에 천공 시 발생하는 지반이완영역에 대한 복원이 명확지 않아 보강재의 구조적 결함을 유발할 우려가 있다. 반면에 압력재주입 그라우팅은 먼저 그라우트를 채운 후 소정의 시간이 지나고 미리 설치한 튜브를 통하여 추가적으로 재주입하는 방식으로 기존의 그라우팅 방식에서 발생할 수 있는 문제를 상당부분 해결할 수 있어 그라우팅의 품질을 향상할 수 있다. 본 연구에서는 그라우팅 방식에 따른 인발특성을 평가하기 위하여 화강풍화토 지반을 대상으로 모형실험을 실시하였으며, 그라우팅방법에 따른 인발력 변화와 압력 재주입그라우팅의 재주입시기와 재주입압에 따른 보강재 지지력 증대 특성을 평가하고자 하였다. 연구결과 압력재주입식 그라우팅이 중력식그라우팅에 비해 최소 1.1배에서 1.3배까지 인발력이 크게 발휘되는 것을 확인하였으며, 압력재주입식 그라우팅의 적정 물시멘트비, 주입압력 및 재주입시기에 대한 고찰결과를 제시하였다.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1996년도 Proceedings of the Korea Automatic Control Conference, 11th (KACC); Pohang, Korea; 24-26 Oct. 1996
• /
• pp.4-12
• /
• 1996

This keynote presentation covers the subject of intelligent systems development for monitoring and control in various NASA space applications. Similar intelligent systems technology also has applications in terrestrial commercial applications. Discussion will be given of the general approach of intelligent systems and description given of intelligent systems under prototype development for possible use in Space Shuttle Upgrade, in the Experimental Crew Return. Vehicle, and in free-flying space robotic cameras to provide autonomy to these spacecraft with flexible human intervention, if desired or needed. Development of intelligent system monitoring and control for regenerative life support subsystems such as NASA's human rated Bio-PLEX test facility is also described. A video showing two recent world's firsts in real-time vision-guided robotic arm and hand grasping of tumbling and translating complex shaped objects in micro-gravity will also be shown.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1997년도 한국자동제어학술회의논문집; 한국전력공사 서울연수원; 17-18 Oct. 1997
• /
• pp.516-519
• /
• 1997

In this paper, the control of the temperature for the vehicle air conditioner is implemented with the fuzzy controller using a micro controller. The linguistic control rules of the fuzzy controller are separated into two out variables(multi input multi output ; MIMO) : one is those for the blower motor, and the other is those for air mix door. The error in fuzzy controller, the input variable is defined as difference between the reference temperature and the actual temperature in the cabin room. The fuzzy control rules are established from the human operator experience, and based engineering knowledge about the process. The method of the center of gravity is utilized for the defuzzification.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2016년도 제50회 동계 정기학술대회 초록집
• /
• pp.384.2-384.2
• /
• 2016

Recent publications reported the self-propelled jumping of coalescing dew droplets on superhydrophobic surfaces [1-2]. We further investigated the initial growth, coalescence, and removal by self-propelled ejection of nano and microscopic water droplets on the superhydrophobic surface of lotus leaves under condensing conditions. By using a high-speed digital camera mounted on an optical microscope, we have found: (1) sub-micrometer droplets form and grow on nanoscale waxy hairs; (2) growing droplets coalesce rapidly upon contact, but never jump off the surface unless the diameter of merged droplets exceeds ${\sim}15{\mu}m$; (3) the diameter and direction of jumping droplets are very narrowly distributed, centered at $20-30{\mu}m$ and ${\sim}20$ degrees from the surface normal, respectively. We present a rationale for these observations on the basis of: (a) the hierarchically rough surface structure on nano- and micro-scales; (b) its chemical composition; and (c) the balance among competing forces of cohesion (surface tension), adhesion and gravity.