• 조명전기설비학회논문지
• /
• 제14권1호
• /
• pp.75-81
• /
• 2000

본 논문에서는 $SF_6$가스 내에 혼입된 급속이물에 의한 부분방전에 대해 연구하였다. 모의 GIS챔버를 설계.제작하여, 전극 내에 혼입된 금속이물에 의한 부분방전 및 절연파괴과정을 관측하고, 초음파센서를 이용하여 부분방 전올 검출하였다. 또한 전극 내에 혼입된 금속이물의 위치에 따른 전계를 해석하였다. $SF_6$가스 내에서 금속이물의 거동 중 끝단에서 부분방전이 발생하였다 이와 같이 금속이물이 거동중에 발생하는 미소 캡사이의 방전은 아크방전으로 진전되어, 결과적으로는 절연파괴를 유발할 수 있다. 금속이물의 위치에 따른 전계분포는 금속이물이 상부전극에 수직으로 부착되어 있는 경우에 전계의 세기가 가장 크고, 하부전극에 수평으로 부착되어 있는 경우가 가장 낮게 나타났다.

• 방사성폐기물학회지
• /
• 제3권1호
• /
• pp.17-21
• /
• 2005

방사선차폐 laser ablation 시스템을 레이저, 미세영역의 영상 확인을 위한 이미지 시스템, XYZ 이동장치와 조절기, ablation chamber, manipulator 및 여러 가지 광학부품들로 구성하였다. Ablation용 레이저는 UOB 및 tircaloy 시편으로부터 효율적으로 시료를 채취할 수 있도록 266 nm(6 mJ)까지 파장 변환이 가능한 Nd:YAG 레이저를 선정하였으며, 이미지 시스템은 직경 50 $\mu$m 크기의 crater를 판별할 수 있는 200 배율 이상의 규격을 갖춘 CCD 카메라로 선정하였다. 시편 미세이동장치는 XYZ방향으로 시편이동이 가능하고 최대 이동거리가 50 mm까지 , 그리고 최소 1$\mu$m 씩 정확하게 움직일 수 있는 장치로 선정하였다. 구성된 각 단위기기들에 대하여 광학 정렬을 수행한 후, 시료채취 부위를 50 $\mu$m씩 정확하게 이동하면서 레이저로 조사시킨 시료 표면을 CCD 카메라를 통하여 관찰한 결과, 표면에 생성된 crater는 원형임을 확인함으로써 단위기기별 성능을 확인할 수 있었다.

• 한국대기환경학회지
• /
• 제30권6호
• /
• pp.531-537
• /
• 2014

Terrestrial vegetation has been known as a main source of biogenic volatile organic compounds (BVOCs). Isoprene and monoterpene among the BVOCs are most abundant species emitted by forests, and have a significant impact on atmospheric chemistry. Abundancy of these species could lead to an increase or decrease in the production of natural tropospheric ozone in forests, depending on the nitric oxide (NO) concentration. Soil is the most significant source of natural NO. Understanding of NO emission from forest soil could be critical in evaluation of air quality in the forest area. Flux-gradient similarity theory (FGST) was applied for practical use to estimate forest soil NO emission at Mt. Taewha where is available micro-meteorological data near surface monitoring from flux tower. NO fluxes calculated by FGST were compared to flux results by flow-through dynamic chamber (FDC) measurement. Surface NO emission trends were shown between two different techniques, however their magnitudes were found to be different. NO emissions measured from FDC technique were relatively higher than those from theoretical results. Daily mean NO emissions resulted from FGST during Aug. 13, 14 and 15 were $0.28{\pm}8.45$, $2.17{\pm}15.55$, and $-3.18{\pm}13.65{\mu}gm^{-2}hr^{-1}$, respectively, while results from FDC were $2.26{\pm}1.44$, $5.11{\pm}3.85$, and $2.23{\pm}6.45{\mu}gm^{-2}hr^{-1}$. Trends of daily means were shown in similar pattern, which NO emissions were increasing during late afternoon ($r^2$=0.04). These emission trends could be because soil temperature and moisture influence importantly soil microbiology.

• 대한환경공학회지
• /
• 제36권7호
• /
• pp.476-482
• /
• 2014

본 연구는 에멀젼 연료의 특성과 배출가스에 관하여 연구하였다. 엔진 배출가스 측정은 엔진 dinamometer로 실시하였다. 유화연료는 연소실내에서 미세폭발을 일으켜 연료를 잘게 쪼개어 주어 smoke를 감소시킨다. 그리고 물이 연소실내의 기화열을 빼앗아 연소실 내부의 온도를 낮추어 NOx 생성을 억제하는 효과를 갖는다. ND-13모드의 각 모드별 배출가스온도가 MDO에 비해 유화연료를 사용했을 때 낮게 나온 것으로 뒷받침 될 수 있었다. 유화연료의 함수율이 증가함에 따라 NOx와 smoke의 배출량은 줄어들었으며, 출력도 함수율 증가에 따라 유화연료 자체의 발열량 감소로 인하여 줄어든 것으로 판단된다. ND-13모드에서 MDO 유화연료를 시험결과 함수율 17% 유화연료의 NOx 감소량은 약 24%, smoke의 총감소량은 약 73%, $SO_2$ 감소량은 약 11%, 그리고 약 13%의 출력손실을 확인하였다.

• 마이크로전자및패키징학회지
• /
• 제20권2호
• /
• pp.59-64
• /
• 2013

3차원 적층 패키지를 위한 Cu/Ni/Au/Sn-Ag/Cu 미세 범프의 열처리에 따른 금속간 화합물 성장 거동을 분석하기 위하여 in-situ SEM에서 $135^{\circ}C$, $150^{\circ}C$, $170^{\circ}C$의 온도에서 실시간 열처리 실험을 진행하였다. 실험 결과 금속간 화합물의 성장 거동은 열처리시간이 경과함에 따라 시간의 제곱근에 직선 형태로 증가하였고, 확산에 의한 성장이 지배적인 것을 확인 할 수 있었다. Ni/Au 층의 존재로 인해 Au의 확산으로 복잡한 구조의 금속간 화합물이 생성 된 것을 확인할 수 있다. 활성화 에너지는 $Cu_3Sn$의 경우 0.69eV, $(Cu,Ni,Au)_6Sn_5$경우 0.84 eV로 Ni이 포함된 금속간 화합물이 더 높은 것을 확인 하였으며, 확산 방지층 역할을 하는 Ni층에 의해 금속간 화합물 성장이 억제됨에 따라 신뢰성이 향상 될 것으로 사료된다.

• 대한기계학회논문집A
• /
• 제31권10호
• /
• pp.981-985
• /
• 2007

We present a MEMS-based portable Direct Methanol Fuel Cell (micro-DFMC), featured by a platinum sputtered microcolumn electrode and a built-in fuel chamber containing a limited amount of methanol fuel. Also presented is a micro-DMFC stack structure having a common electrolyte sandwiched by the microcolumn electrodes. The single cells with ME16 and PE16 electrodes show the maximum power densities of $31.04{\pm}0.29{\mu}W/cm^2$ and $9.75{\pm}0.29{\mu}W/cm^2$, respectively; thus indicating the microcolumn electrode (ME16) generates the power density (3.2 times) higher than the planar electrode (PE16). The single cell tests of ME16 and ME4 electrodes (Fig.8) show the maximum power of $31.04{\pm}0.29{\mu}W/cm^2$, and $25.23{\pm}2.7{\mu}W/cm^2$, respectively; thus demonstrating the increased window frame reduces the normalized standard power deviation (standard deviation over the average power). The normalized deviation of 0.11 in ME4 cell has been reduced to 0.01 in ME16 cell due to the increased window frames. The maximum power density of 4-cell stack is 15.7 times higher than that of the single cell. 4-cell stack produces the power capacity of 20.3mWh/g during 980min operation at the voltage of 450mV with the load resistance of $800{\Omega}$.

• 한국의류학회지
• /
• 제23권1호
• /
• pp.30-41
• /
• 1999

This study was conducted to verify the advantages of Gal-Ot. Gal-Ot is defined the clothings dyed with persimmon juice. Firstly the physical properties of fabrics were examined. Secondly the wear tests were conducted. The wear tests were performed in climatic chamber controlled 3$0^{\circ}C$ air temperature 50$\pm$5% R.H and 0.2m/s air movement. Four women subjects participated in this experiment and 4 times experiments were performed per one subject. The expeimental schedule was planned following 4 steps that is sedentary posture during 30 minutes-walking the 5。slope treadmill by 70m/min during 20 minutes-sedentary posture during 20 minutes-standing posture on toward the blowing wind during 10 minutes. The results obtained is as folows : The insulation of fabric was increased with dyeing with persimmon juice. The air permeability of fabric was remarkably increased with dyeing with persimmon juice. The mean skin temperatures of subjects were apt to be higher in wearing Gal-Ot than undyed clothing. The clothing micro temperature of subjects were slightly inclined to become lower in wearing Gal-Ot than undyed clothing, The clothing micro humidity was decreasee when: the subjects were gal-Ot than wore undyed clothing, And then it brought about more comfortable on wear sensation. The differences of physiological reactions were not consistent between clothing types except for sweat rate on the back. This result may be attributed the to complex experimental schdules consisted of four steps and to a little difference between open type and close type. However I consider that the clothing type of Gal-Ot is suitable for open type because Gal-Ot is summer wear for blocking the sultry heat.

• 한국의류산업학회지
• /
• 제13권5호
• /
• pp.752-758
• /
• 2011

In this paper, experiments to develop working clothes and evaluated, including the current and material-improved working clothes in relation to physiological functionality measurement. Experiments were conducted on subjects after wearing working clothes in an climate chamber, and the thermo-physiological response, such as human body temperature, micro-climate within the clothes, blood pressure, heart rate were measured. In this manner, the physiological functionality of improved working clothes was compared with that of current working clothes and evaluated. The summary of obtained results is as follows: For physiological functionality evaluation through material-improved working clothes, P working clothes showed significantly lower rectal temperature than C working clothes. For mean skin temperature, P's skin temperature was significantly higher than C's in the second half of the experiment. P working clothes's temperature around the thighs in Micro climate was significantly lower than that of the C working clothes. Also, humidity within the clothes showed similar trends. During the exercise period, C working clothes showed higher blood pressure than P, but P showed higher heart rates than C. Also, the oxygen uptake amount was higher in C than P during the exercise period, it explains that the energy consumption amount of P working clothes was smaller than that of C working clothes. Of the subjective evaluation, for temperature sensation, workers wearing P working clothes felt cooler. For humidity, C working clothes showed more humidity. For comfort, P working clothes were better, and for sense of fatigue, workers felt less tired wearing P working clothes. From results above, we can see that physiological functionality improved in the material-improved working clothes in the working clothes for construction site workers. The improvement of working clothes through functionality improvements not only will provide personal pleasantness to constriction site workers, but will also generate efficiency and productivity improvements at construction sites. All in all, the continuous study of functionality improvements in working clothes taking into consideration the human body's physiological responses is required.

• Journal of Biosystems Engineering
• /
• 제32권6호
• /
• pp.440-447
• /
• 2007

In this study, a biosensor was developed using an enzyme-linked immunosorbent assay (ELISA) to rapidly measure the fungicide iprovalicarb residues in agricultural products. The biosensor was designed to include micro-pumps and solenoid valves for fluid transport, a spectrophotometer cuvet as a reaction chamber, a photodiode with a light-emitting diode for optical density measurement, and a control microcomputer to implement assay. The rate of change in optical density of the cuvet was read as final signal output. Micro-pumps were evaluated to investigate their delivery capability, the highest values of the error and the coefficient of variation were 4.3% and 4.6% respectively. As the incubation period was reduced from 15 minutes to 11 minutes to shorten the total processing time, the sensor sensitivity was decreased as the antibody dilution ratio was reduced to a half. The maximum usable period of the coated cuvet was found to be two days with 1% error limit. To predict the concentration of the iprovalicarb residue in agricultural products, a linear calibration model was obtained with r-square values of 0.992 for potato and 0.985 for onion. In validation test for the samples of potatoes and onions against the high performance liquid chromatography, very high correlation values were obtained as 0.996 and 0.993 respectively. Using the cuvet immobilized with antigen, it took 21-minutes for the biosensor to complete the measuring process of the iprovalicarb residues.

• 한국의류산업학회지
• /
• 제2권5호
• /
• pp.416-422
• /
• 2000

In this study, to find out the physiological reaction of the human body and the sensation of comfort when people are wearing sportswear which is made of waterproof breathable fabrics under general environmental conditions (temperature : $20{\pm}1^{\circ}C$, humidity : $60{\pm}5%RH$, air current : 0.1 m/sec) and rainy environmental conditions (temperature : $20{\pm}1^{\circ}C$, humidity : $60{\pm}5%RH$, air current : 0.1 m/sec, rainfall : 250 1/hr), we made an experiment with sportswear in an artificial climate chamber and studied the thermal physiological response and subjective sensation. Mean skin temperature of the subjects was low and had a big range of fluctuation in rainy environmental conditions of two condition. Temperature started to increase at the beginning of the exercise, reached the maximum at the 2nd level of the exercise and then started to decline. Rectal temperature showed a slighter increase and bigger range of fluctuation in general conditions than in rainy conditions. Except clothing micro climate in rainy conditions, temperature and humidity and their range of fluctuation around back were higher than those around chest. Humidity was high and had wide range of fluctuation in general conditions. Heart rate was 4.4 beats/min higher in general conditions. In subjective test on rainy conditions, the feeling of discomfort increased due to the raindrops fallen on the skin. Unlike that in general conditions, cold sensation increased and humidity sensation reached to the peak after the exercise. In wearing sportswear made of shape memory breathable waterproof fabric, controlling function over a small amount of heat and water was distinctive while it turned out to be not so comfortable over a large amount of heat and water. Through this, the limitation of shape memory breathable waterproof fabric was recognised.