• 대한치과보철학회지
• /
• 제42권2호
• /
• pp.192-209
• /
• 2004

Purpose : The purpose of this study was to evaluate the machining accuracy and consistency of implant/abutment/screw combination or internal connection type. Material and methods: In this study, each two randomly selected internal implant fixtures from ITI, 3i, Avana, Bicon, Friadent, Astra, and Paragon system were used. Each abutment was connected to the implant with 32Ncm torque value using a digital torque controller or tapping. All samples were cross-sectioned with grinder-polisher unit (Omnilap 2000 SBT Inc) after embeded in liquid unsaturated polyester (Epovia, Cray Valley Inc). Then optical microscopic and scanning electron microscopic(SEM) evaluations of the implant-abutment interfaces were conducted to assess quality of fit between the mating components. Results : 1) Generally, the geometry of the internal connection system provided for a precision fit of the implant/abutment into interface. 2) The most precision fit of the implant/abutment interface was provided in the case of Bicon System which has not screw. 3) The fit of the implant/abutment interface was usually good in the case of ITI, 3I and Avana system and the amount of fit of the implant/abutment interface was similar to each other. 4) The fit of the implant/abutment interface was usually good in the case of Friadent, Astra and Paragon system. The case of Astra system with the inclined contacting surface had the most Intimate contact among them. 5) Amount of intimate contact in the abutment screw thread to the mating fixture was larger in assembly with two-piece type which is separated screw from abutment such as Friadent, Astra and Paragon system than in that with one-piece type which is not seperated screw from abutment such as ITI, 3I and Avana system. 6) Amount of contact in the screw and the screw seat of abutment was larger in assembly of Friadent system than in asembly of Astra system of Paragon system. Conclusion: Although a little variation in machining accuracy and consistency was noted in the samples, important features of all internal connection systems were the deep, internal implant-abutment connections which provides intimate contact with the implant walls to resist micro-movement, resulting in a strong stable interface. From the results of this study, further research of the stress distribution according to the design of internal connection system will be required.

• Transactions on Electrical and Electronic Materials
• /
• 제17권5호
• /
• pp.280-288
• /
• 2016

Microelectronic product consumers may already be expecting another paradigm shift with smarter phones over smart phones, but the current status of microelectronic manufacturing engineering education (MMEE) in universities hardly makes up the pace for such a fast moving technology paradigm shift. The purpose of MMEE is to educate four-year university graduates to work in the microelectronics industry with up-to-date knowledge and self-motivation. In this paper, we present a comprehensive curriculum for a four-year university degree program in the area of microelectronics manufacturing. Three hands-on experienced-based courses are proposed, along with a methodology for undergraduate students to acquire hands-on experience, towards integrated circuits (ICs) design, fabrication and packaging, are presented in consideration of manufacturing engineering education. Semiconductor device and circuit design course for junior level is designed to cover how designed circuits progress to micro-fabrication by practicing full customization of the layout of digital circuits. Hands-on experienced-based semiconductor fabrication courses are composed to enhance students’ motivation to participate in self-motivated semiconductor fab activities by performing a series of collaborations. Finally, the Microelectronics Packaging course provides greater possibilities of mastered skillsets in the area of microelectronics manufacturing with the fabrication of printed circuit boards (PCBs) and board level assembly for microprocessor applications. The evaluation of the presented comprehensive curriculum was performed with a students’ survey. All the students responded with “Strongly Agree” or “Agree” for the manufacturing related courses. Through the development and application of the presented curriculum for the past six years, we are convinced that students’ confidence in obtaining their desired jobs or choosing higher degrees in the area of microelectronics manufacturing was increased. We confirmed that the hypothesis on the inclusion of handson experience-based courses for MMEE is beneficial to enhancing the motivation for learning.

• 한국항공우주학회지
• /
• 제38권7호
• /
• pp.702-708
• /
• 2010

반작용휠의 경우 위성 탑재체에 영향을 미치는 가장 큰 고주파수 교란 중 하나로 평가되고 있다. 위성의 높은 지향-안정성 보장과 영상품질 향상을 위해서 이러한 진동원들에 대한 진동저감장치의 적용이 요구되고 있다. 따라서 효과적 진동저감장치 개발을 위해서는 반작용휠의 정확한 휠/교란 모델링이 선행되어야 한다. 본 연구에서는 반작용휠 구조모델과 교란에 대한 모델링 기법에 대해서 기술하였다. 해석적 휠 및 교란모델을 이용하여 플라이휠의 구동에 의해 발생하는 교란력을 계산하였다. 휠의 교란력에 대한 주파수 특성을 이용하여 휠/교란 모델 변수들의 추정기법을 제시하였으며, 모델링 기법의 정확성을 해석적으로 검증하였다. 또한, 다양한 교란력 계수 추정법을 비교하여 본 연구에서 제시한 휠 및 교란 모델링 기법의 필요성을 확인할 수 있었다. 본 연구에서 제시한 휠 및 교란 모델링 기법은 휠 진동저감 장치의 개발에 유용한 모델로 활용될 것으로 판단된다.

• 정보관리학회지
• /
• 제23권3호
• /
• pp.187-204
• /
• 2006

기록관리의 가장 궁극적인 목표는 기관의 기능과 활동을 역사로 남기는 것이다. 기관의 활동을 반영하는 많은 기록물들 가운데 어떤 기록물들이 장기적으로 보존할 가치가 있는가를 객관적으로 평가하여 가치 있는 기록물들만을 선별해 내는 것은 기록관리의 핵심이면서도 대단히 어려운 작업이다. 현대기록은 그 양적인 폭증 및 복잡성의 증대, 전자화 현상을 특징으로 하며, 이는 정보화 환경과 맞물려, 기록물의 전생애주기에 걸친 관리, 통제라는 연속체적 개념의 성립을 가져 왔다. 본 연구는 장기보존할 가치가 있는 기록물을 기록물관리 초기 단계에서부터 선별하기 위한 객관적인 가이드 라인으로서 기관의 기능과 조직이라는 거시적인 요소와 개별 기록물의 내용평가(증거적가치)라는 미시적인 요소가 결합된 업무분석적 평가방안을 제안하였다.

• KIEAE Journal
• /
• 제5권2호
• /
• pp.11-18
• /
• 2005

The Purpose of this study is development and analysis of Effluence Characteristic of the Rainfall in the IRMA Green Roof System(developed in KICT) Plus 50 program is an internal research project at KICT(Korean Institute of Construction Technology) which has it as an object ; to lengthen the building's life 50-year or more and reduce energy conception 50% than present. Green roof system is one of the most important theme in the Plus 50 program. Generally, a Green Roof System has a positive effect on the thermal conductivity in winter, the micro cooling effect on building and city by evaporation in summer, the flood-control effect by runoff-reduction or the treated rainwater-quality of green roof system and so on. However, inspection of the physical effect of green roof system does not consider in Korea. Above all, long-term monitoring and a whole observation of green roof system is needed to probate the effect. So a new experimental method could be tried in this research, which is never attempted in Korea. The measurement by a bucket with a great volume, 1L, gives a new dimension of measuring green roof effect to measure the permanent running flood from a wide roof. This offers a reasonable result on a long-term measuring of a running water. Additionally, the thermal behavior of the IRMA(Insulated Roof Membrane Assembly), known in the western europe as a reasonable solution at green roof system by economical benefits and easy construction, would be experimented.

• Fisheries and Aquatic Sciences
• /
• 제10권3호
• /
• pp.119-126
• /
• 2007

The analysis of expressed sequence tags (ESTs) is an efficient approach for gene discovery, expression profiling, and the development of resources for functional genomics. To analyze the transcriptome of the abalone Haliotis discus hannai, we conducted EST analysis using seven cDNA libraries made from gill, gut, hepatopancreas, skin, muscle, testis, and ovary. Redundant ESTs were assembled into overlapping contiguous sequences using the assembly program ICAtools. We found that the total 1,393 ESTs formed 135 clusters and 951 singletons, indicating that the overall redundancy of the library was 22%. Of the 1,393 clones, BLAST identified 1,278 clones (91.7%) as known genes; 115 clones (8.3%) did not match any previously described gene. Based on the major functions of their encoded proteins, the identified clones were classified into 16 broad categories. Sequence analysis revealed the presence of micro satellite-containing genes that may be valuable for further gene mapping studies. This study contributes to the identification of numerous EST clones that can be applied to further clarifying the genetics and developmental biology of abalone.

• 노동경제논집
• /
• 제29권2호
• /
• pp.117-143
• /
• 2006

본 논문은 1963년부터 2003년까지의 40년간의 국내의 금속, 화학, 금융, 자동차 운수부문(sector)의 조합원 수가 시기별로 어떤 증가나 감소 패턴을 보이는가를 규명한다. 또한 이 4개 부문에 속한 산업(industry)인 금속부문의 자동차 조립, 자동차 부품, 조선산업, 화학부문의 시멘트, 석유정제, 제약산업, 금융부문의 민간은행업, 그리고 자동차 운수부문의 시내버스업에서 노조 조직률을 추정하여 산업별로 상대적 노조규모의 차이를 보여준다. 이러한 노조규모의 절대적인 혹은 상대적인 규모의 시기별 변화나 산업별 차이가 각 부문이나 산업이 처한 경제적 환경(성장 단계나 경로)과 제도적 환경(정부개입의 유형이나 정도) 및 사회적 환경(근로자들의 학력, 성별, 연령 혹은 회사의 규모 등의 산업구조)에 영향을 받는 사용자들이나 노조의 태도나 선택에 의해 설명된다. 부문이나 산업수준의 다양성을 고려한 본 논문의 미시적인 사회 경제적 이론들은 선진국의 국제비교 노사관계의 최근 연구들에서 나타나는 미시적인 연구의 필요성의 증가와 맥을 같이한다.

• Molecules and Cells
• /
• 제23권2호
• /
• pp.228-238
• /
• 2007

Since molecular structure of hnRNP is not available in foreseeable future, it is best to construct a working model for hnRNP structure. A geometric problem, assembly of $700{\pm}20$ nucleotides with 48 proteins, is visualized by a frame work in which all the proteins participate in primary binding, followed by secondary, tertiary and quaternary binding with neighboring proteins without additional import. Thus, 40S hnRNP contains crown-like secondary structure (48 stemloops) and appearance of 6 petal (octamers) rose-like architectures. The proteins are wrapped by RNA. Co-transcriptional folding for RNP fibril of FMR1 gene can produce 2,571 stem-loops with frequency of 1 stem-loop/15.3 nucleotides and 53 40S hnRNP beaded structure. By spliceosome driven reactions, there occurs removal of 16 separate lariated RNPs, joining 17 separate beaded exonic structures and anchoring EJC on each exon junction. Skipping exon 12 has 5'GU, 3'AG and very compact folding pattern with frequency of 1 stem-loop per 12 nucleotides in short exon length (63 nucleotides). 5' end of exon 12 contains SS (Splicing Silencer) element of UAGGU. In exons 10, 15 and 17 where both regular and alternative splice sites exist, SS (hnRNP A1 binding site) is observed at the regular splicing site. End products are mature FMR-1 mRNP, 4 species of Pri-microRNAs derived from introns 7,9,15 and 3'UTR of exon17, respectively. There may also be some other regulatory RNAs containing ALU/Line elements as well.

• 한국지반환경공학회 논문집
• /
• 제13권10호
• /
• pp.55-62
• /
• 2012

본 연구에서는 개별요소해석 프로그램인 $PFC^{3D}$를 이용하여 대입경 조립재료의 특정 입도분포를 구현하는 알고리즘을 개발하였다. 기존의 입자 형상이나 입도를 구현하기 위해 사용되었던 clump logic 또는 cluster logic을 사용하지 않으며 요소의 경계면 이탈 현상과 경계면 파괴 등을 방지할 수 있는 초기 개별요소 모델링 기법을 고안하였다. 최종적으로 대입경 조립재료에 대한 대형 삼축압축시험을 수치 모델링하고 실내시험 결과와 비교하였다. 해석 결과, 실제 시료의 입도분포와 매우 흡사한 분포의 개별요소를 생성할 수 있었고, 적정 미시물성치 산정 과정(calibration)을 통해 다양한 구속응력 조건에 대한 대입경 조립재료의 특정 입도분포하에서의 전체적인 수치 모델링이 가능하였다.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2011년도 제41회 하계 정기 학술대회 초록집
• /
• pp.392-392
• /
• 2011

Carbon nanotubes (CNT) emitter has widely become an attractive mechanism that draws growing interests for cold cathode field emission.$^{1,2}$ CNT yarns have demonstrated its potential as excellent field emitters.$^3$ Extensive simulations were carried out in designing a CNT yarn-based cathode assembly. The focal spot size dependence on the anode surface of the geometric parameters such as axial distance of the electrostatic focus lens from the cathode and the applied bias voltages at the cathode, grid mesh and electrostatic focus lens were studied. The detailed computer simulations using Opera 3D electromagnetic software$^4$ had revealed that a remarkable size of focal spot under a focusing lens triode type set-up design was achieved. The result of this optimization simulation would then be applied for the construction of the CNT yarn based micro-focus x-ray tube with its field emission characteristics evaluated.