• Bulletin of the Korean Chemical Society
• /
• v.22 no.7
• /
• pp.678-684
• /
• 2001

Porous silica-pillared montmorillonites were prepared by simultaneous intercalation of dodecylamine-TEOS [tetraethylorthosilicate, Si(OC2H5)4] into the H-montmorillonite and intragallery amine-catalyzed hydrolysis of TEOS. Mixtures of the H-montmorillonite, dodecylamine and TEOS at molar ratios of 1 : 2 : 15-30 and 1 : 2-6 : 20 resulted to swollen and viscous gel once at room temperature, allowing intercalation compounds which dodecylamine and TEOS were simultaneously intercalated into interlayer of H-montmorillonite. The hydrolysis of the gallery TEOS was conducted in water solution for 40 min at room temperature, affording siloxane-pillared H-montmorillonite. Calcination of samples at 500 $^{\circ}C$ in air resulted in silica-pillared montmorillonite with large specific surface areas between 403 and 577 m2 /g, depending on the reaction stoichiometry. The reaction at H-montmorillonite : dodecylamine : TEOS reaction stoichiometries of 1 : 2 : 15 and 1 : 4 : 20 resulted in high specific surface areas and mesopores with a narrow pore size distribution. Result indicates that the intragallery-amine catalyze the hydrolysis of gallery-TEOS and simultaneously have a role of gallery-templated micellar assemblies.

• Bulletin of the Korean Chemical Society
• /
• v.18 no.2
• /
• pp.185-189
• /
• 1997

The effect of pH and sodium dodecyl sulfate (SDS) micelle on the quenching of Ru(bpy)32+ luminescence by N-alkyl-4,4'-bipyridinium ions (RBPY+: R=methyl, octyl, dodecyl, benzyl) were investigated. In the absence of SDS, the quenching rate at pH 2 is similar to that of the corresponding methylalkyl viologens and much greater than that in pH 8 solution due to greater reducibility of the protonated form of RBPY+ (HRBPY2+). The quenching rate at pH 2 is strongly enhanced by the presence of SDS, while that at basic pH is greatly retarded. These observations are explained by deep embedment of RBPY+ into the hydrophobic hydrocarbon region of the micelle, whereas Ru(bpy)32+ and HRBPY2+ locate in the Stern layer of the micelle.

• Korea-Australia Rheology Journal
• /
• v.14 no.4
• /
• pp.189-201
• /
• 2002

The interaction between hydrophobically modified hydroxyethyl cellulose (hmHEC), containing approximately 1 wt% side-alkyl chains of $C_{16}$, and an anionic sodium dodecyl sulphate (SDS) surfactant was investigated. For a semi-dilute solution of 0.5 wt% hmHEC, the previously observed behaviour of a maximum in solution viscosity at intermediate SDS concentrations, followed by a drop at higher SDS concentrations, until above the cmc of surfactant when the solution resembles that of the unsubstituted polymer, was confirmed. Additionally, a two-phase region containing a hydrogel phase and a water-like supernatant was found at low SDS concentrations up to 0.2 wt%, a concentration which is akin to the critical association concentration, cac, of SDS in the presence of hmHEC. Above this concentration, SDS molecules bind strongly to form mixed micellar aggregates with the polymer alkyl side-chains, thus strengthening the network junctions, resulting in the observed increase in viscosity and elastic modulus of the solution. The shear behaviour of this polymer-surfactant complex during steady and step stress experiments was examined In great detail. Between SDS concentrations of 0.2 and 0.25 wt%, the shear viscosity of the hmHEC-polymer complex network undergoes shear-induced thickening, followed by a two-stage shear-induced fracture or break-up of the network. The thickening is thought to be due to structural rearrangement, causing the network of flexible polymers to expand, enabling some polymer hydrophobic groups to be converted from intra- to inter-chain associations. At higher applied stress, a partial local break-up of the network occurs, while at even higher stress, above the critical or network yield stress, a complete fracture of the network into small microgel-like units, Is believed to occur. This second network rupture is progressive with time of shear and no steady state in viscosity was observed even after 300 s. The structure which was reformed after the cessation of shear is found to be significantly different from the original state.

• Korean Chemical Engineering Research
• /
• v.52 no.2
• /
• pp.219-225
• /
• 2014

In this study, effect of cosurfactant on the solubilization rate of n-octane, n-decane and n-dodecane oil was performed by micellar solutions of polymeric nonionic surfactant Pluronic L64($EO_{13}PO_{30}EO_{13}$) at room temperature. It has been found that the solubilization rate of a hydrocarbon oil was enhanced with an increase in both chain length and amount of alcohol added. In case of addition of a short chain alcohol such as 1-butanol, the solubilization rate of a hydrocarbon oil was slightly increased since most of alcohol molecules remained in an aqueous surfactant solution. On the other hand, the addition of a relatively long chain alcohol such as 1-hexanol and 1-octanol produced a big increase in solubilization rate of a hydrocarbon oil mainly due to incorporation of alcohol molecules into micelles and thus producing more flexible micellar packing density. Dynamic interfacial tension measurements showed the same trend found in solubilization rate measurement. Both interfacial tension value at equilibrium and time required to reach equilibrium decreased with an increase in chain length of an alcohol.

• Membrane Journal
• /
• v.18 no.1
• /
• pp.7-25
• /
• 2008

Sodium dodecyl sulfate, which was anionic surfactant, at a concentration higher than its critical micellar concentration was added to calcium solution for forming micelles. Then aggregates were formed by adsorption or binding of calcium ions on the surface of micelles, and gathering between them, and then rejected by two kinds of ceramic membranes to remove calcium ions. As result, rejection rates of calcium were higher than 99.98%. And in our experimental range the higher TMP trended to increase the resistance of membrane fouling ($R_f$), total permeate volume ($V_T$), dimensionless permeate flux ($J/J_o$) and permeate flux (J) because TMP was driving force. And we investigated effects of $N_2$-back-flushing time and filtration time, that was back-flushing period, during periodic $N_2$-back-flushing on ceramic membranes. As result, optimal BTs for NCMT-623l ($0.07{\mu}m$ pore size) and NCMT-7231 membrane ($0.10{\mu}m$) were 10 sec and 15 sec, respectively. Also, optimal FT was 5 min for both membranes, and the frequent $N_2$-back-flushing could decrease membrane fouling effectively. Then, the optimal conditions resulting from our experiments for synthetic calcium solution were applied to groundwater using as washing process of soymilk package. As result, rejection rates of calcium were higher than 99.98%.

• Journal of the Korean Ceramic Society
• /
• v.35 no.6
• /
• pp.594-602
• /
• 1998

Titanium hydroxide (TiO({{{{ {OH }_{2 } }})) fine particles were produced by the reverse micelle technique. For the formation of titanium hydroxide (TiO({{{{ {OH }_{2 } }})) particles with the technique reversed micellar solution was prepared by solubilizing water into organic solvent (isooctane) with a surfactant and titanium alkoxide (tetraisopropyl orthotitanate) diluted with isopropyl alcohol was added to the reversed micellar solution. The hdrolyzed species (TiO({{{{ {OH }_{2 } }})) was formed by the hydrolysis of titanium alkoxide and titanium dioxide is then formed by the condensation of the hydrolyzed species. There are several process variables such as surfactants concentration of surface cosurfactant hydrolysis temperature and pH. In this work the ef-fects of process variables on paticle shapes particle size distribution and paticle agglomeration were bi-nodal for an anionic surfactant(AOT) in the whole range of temperature pH and surfactant concentration of this experiment. The addition of ethanol as a cosurfactant resulted in narrow particle size distribution of the experiment. The additiono of ethanol as a cosurfactant resulted in narrow particle size distribution and 0.12${\mu}{\textrm}{m}$ of smaller average particle diameter. FT-IR spectrum of particles shows the absorption peak of Ti-OH bonding and Ti-O bonding. An exothermic peak around 41$0^{\circ}C$ in TGA-DTA curve shows that crys- tallized anatase phase appears and completely transits to anatase around 45$0^{\circ}C$.

• Archives of Pharmacal Research
• /
• v.24 no.6
• /
• pp.584-589
• /
• 2001

Isopropryl 2-(1-3-dithiethane-2-ylidene)-2 [N-(4-methyl-thiazole-2-yl) carbamoyl] acetate (YH439) is currently under phase ll clinical trials by the Yuhan Research Center for use as a hepatoprotective agent. Unfortunately, the oral bioavailbility of YH439, which is sparingly soluble in water (i.e., $0.3{\;}\mu\textrm{g}/ml{\;}or{\;}0.91{$\mu}M$ at room temperature), reportedly, is negligibleregardless of the dose administered to rats in the 10-300 mg/kg range. The bioavailability of the compound increased up to 24%, when administered in the form of a micellar solution ($700{\;}\mu\textrm{g}/ml$or 2.1 mM for YH439) at a dose of 10 mg/kg, suggesting that its limited solubility is associated with its negligible bioavailability. In order to obtain additional informmation concerning the bioavailability of YH439, the mechanism(s) involved in gastrointestinal (Gl) absorption were investigated in the present study. For this purpose, the transport of YH430 across a Caco-2 cell monolayer was measured in a $Transwell^{\circledR}$. A permeability of $4.07{\times}10^{-5}{\;}cm/s$ was obtained for the absorptive (i.e., apical to basolateral direction) transport of $0.42{\mu}M$ YH439, implicating that the in vivo Cl absorption is nearly complete. The absorptive transport exhibited a slight concentration-dependency with an intrinsic clearance ($CL_{i}$) of $0.38{\mu}L/{\textrm{cm}^2}/sec$, which accounted for 28.1% of the total intrinsic clearance (i.e., $CL_i$ plus the intrinsic clearance for the linear component) of the transport. Thus, saturation of the absorption process appears to be a minor factor in limiting the bioavailability of the compound. The apparent permeability of YH439 from the basolateral to the apical direction (i.e., efflux, $6.67{\times}10^{-5}{\;}cm/s$) was comparable to that for absorptive transport, but, interestingly, a more distinct concentration-dependency was observed for this transport. However, the efflux does not appear to influence the bioavailability of the compound, as evidenced by the sufficiently high permeability in the absorption direction. Rather, a reportedly extensive first-pass hepatic metabolism appears to be a principal factor in limiting the bioavailability. In this respect, reducing the first-pass metabolism by some means would lead to a higher bioavailability of the compound. Thus, elevation of the absorption rate of YH439 becomes a necessity. From a practical point of view, increasing the concentration of YH439 in the Cl fluid appears to be a feasible way to increase the absorption rate, because the compound is primarily absorbed via a linear mechanism. In summary, the solubilization of YH439, as previously demonstrated for a micellar solution of the compound, appears to be a practical way to increase the oral bioavailability of YH439.

• Proceedings of the Korean Society of Applied Pharmacology
• /
• 1994.04a
• /
• pp.201-201
• /
• 1994

항암 및 면역조절작용을 가지고 있으며 그자체가 서방성 prodrug으로서 약효를 나타낼것으로 기대되는 ara-C와 etherphospholipid의 conjugate인 ara-CDP-DL-PCA.2Na의 실험동물(rat)에서의 체내동태를 HPLC 정량법으로 시행 하였다. Ara-CDP-DL-PCA.2Na의 정맥내 투여(20mg/300g)의 경우 혈장중 반감기는 분포상에 있어서는 평균 20min, 소실상 에서는 4.42hr이었다. 분포 용적은 0.1635Lㆍkg$^{-1}$이었고, 전신 clearance 는 25.63ml.$hr^{-1}$.kg$^{-1}$이었다. 한편 AUC는 2601$\mu\textrm{g}$.hr.ml$^{-1}$이었다. 복강내 주사(1g/kg)의 경우 소실상의 반감기는 3.28hr, AUC는 439.3$\mu\textrm{g}$.hr.ml$^{-1}$이었다. 최고 혈중농도 도달시간은 4.4hr이었으며 그때의 농도는 33.19$\mu\textrm{g}$.ml$^{-1}$이었다. 한편 흡수속도 정수는 0.2493$hr^{-1}$이었다. 정맥내 투여에 대한 복강내 투여의 생체 이용율은 1.1252%로 복강내 투여시 흡수율이 좋지 않음을 시사하고 있다. 이는 투여 시료인 micellar solution이 일종의 약물저장 형태로 작용하여 활성물질을 서서히 방출 하기 때문인 것으로 사료된다. 한편 예비적 대사연구결과 TLC에서 뇨나 담즙으로 배설되는 유의한 농도수준의 ara-CDP-DL-PCA.2Na가 없는 것으로 평가되었다. 이는 생체내에서 enzyme등에 의한 대사과정을 거치는 것으로 사료되는바 방사성 동위원소 표지화합물을 이용한 충분한 대사연구가 필요한 것으로 사료된다.

• Proceedings of the Korean Society of Applied Pharmacology
• /
• 1995.04a
• /
• pp.85-85
• /
• 1995

전년도에 ara-C 유도체 중에서 ara-CDP-DL-PTBA가 각종 암세포주에 대한 뛰어난 항암작용이 보고된바 있으며, 이후 시료의 대량확보, Bulk Formulation 및 전임상등의 세가지 분야에 관해 연구를 수행하였다. Ara-CDP-DL-PTBA를 수용액에 현탁, 초음파분쇄후 NICOMP Analysis에 의하여 micellar solution의 입자도를 알아 본 결과 fresh prepared micelles은 11,1mm size가 88.63%이며 50,5mm가 11.37%로 나타나 평균 19,0mm가 되고, Reconstructed micells은 10.9mm size가 99.87%이며 356.1mm가 0.13%로 나타나 평균 11.0mm가 된다. Ara-C와 Ara-CDP-DL-PTBA의 대사작용을 알아본 결과, ara-C는 투여 1시간째 2,850 $\pm$ 450 pmol, 4시간째 450$\pm$190 pmol, 24시간째 30 pmol 이하로 ara-CTP의 혈중 농도가 급격히 감소하는 반면에 ara-CDP-DL-PTBA는 1시간째 650$\pm$120 pmol, 2시간째 1,800$\pm$500 pmol, 24시간째 300$\pm$90 pmol으로 ara-CTP의 혈중 농도가 서서히 감소하였다.

• Bulletin of the Korean Chemical Society
• /
• v.30 no.6
• /
• pp.1252-1256
• /
• 2009

A simple, selective and sensitive fluorescence quenching method was developed to the determination Cr(VI). The method is based on the oxidation of $I^-\;to\;{{I_3}^-}$ by Cr(VI) in sulfuric acid solution followed by immediate formation of ion association compound between I3 − and rhodamine 6G in Tween-80 micellar media at room temperature. The influence of several surfactants on rhodamine 6G fluorescence signal was studied; particular attention was paid in the aggregation behavior of rhodamine 6G–Tween-80 system. The experimental parameters (e.g., type of surfactant, reagent concentration) were studied and the optimal conditions were established. The linear calibration graph was obtained in the range 2.0 - 100.0 ng m$L^{-1}$ Cr(VI). The detection limit of the method was 0.37 ng m$L^{-1}$. The relative standard deviation (R.S.D.) is less than 5% (n = 5). The efficiency of the method for the determination of Cr(VI) in the presence of Cr(III) in the sample was investigated. The method was applied successfully to the determination of Cr(VI) and total Cr in water, and liver tissue samples.