• Proceedings of the Korean Magnestics Society Conference
• /
• 2005.12a
• /
• pp.154-155
• /
• 2005

Multi-layer film of $MgO/(FePt-B)_{50nm}/ MgO$ was deposited on Si(100) substrates by RF magnetron sputtering. The boron chips were uniformly placed oil tile FePt target. The boron content of thin film was found to be about 5, 10, 15, 25 and $33 at\%$ by using a CAMECA SX-51 wavelength dispersive spectroscopy (WDX). It is observed that X-ray diffraction patterns of FePt-B film by post-annealing exhibited a transformation from disordered fcc structure to ordered $Ll_0$ phase with fct structure from around $400^{\circ}C$. By adding B, annealing temperature for ordering is about $200^{\circ}C$ lower than that of pure FePt. This remarkable decrease of the annealing temperature is closely related to the high diffusivities of Fe and Pt associated with the defects caused by movements of B atoms. The maximum coercivity(Hc) for FePt films was found to be ${\~}$13 kOe after annealing at $600^{\circ}C$ for 1hr.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2004.07b
• /
• pp.898-901
• /
• 2004

[ $ZnCr_2O_4$ ]를 모물질로 하고 MgO, $TiO_2$를 몰비로 2:1, 4:1, 6:1, 및 8:1이 되게 정량적으로 조합한 후, 조사하였다. $ZnCr_2O_4$-MgO와 $ZnCr_2O_4-TiO_2$를 X-선 분석한 결과 Spinel 결정구조를 형성하였으며, 또한 SEM과 EDX 분석결과 각각 $Li_2CrO_4$와 $Li_3VO_4$의 형성으로 인하여 저항 특성이 나타나는 것을 알 수 있었다. $ZnCr_2O_4-MgO$, $ZnCr_2O_4-TiO_2$에서 MgO의 양이 증가할수록 저항값은 약간 감소하는 반면, $TiO_2$의 양이 증가할수록 저항값이 급격히 증가하는 특성을 나타내었고, 감습 특성에서도 M??보다 TiO2가 더 높게 나타내었다. 습에 따른 복원 특성의 경우 $700^{\circ}C$에서 소결한 ($ZnCr_2O_4:MgO=4:1$)과 ($ZnCr_2O_4:TiO_2=6:1$) 조성의 센서가 가장 양호하였다.

• Proceedings of the Korean Magnestics Society Conference
• /
• 2007.05a
• /
• pp.243.1-243.1
• /
• 2007

• Proceedings of the KIEE Conference
• /
• 1998.07e
• /
• pp.1764-1766
• /
• 1998

One of the most important problems in the development of AC PDP is to make long life and more stable panels. It is well known that the life time of a panel strongly depends on the sputtering-resistant property of the protecting layer such as MgO. However, the sputtering rate is so low that it is very difficult to measure the sputtering-resistant property of MgO. This paper describes a high speed measurement technique to test the sputtering-resistant property of MgO thin film by the R.F. magnetron sputtering. In this case the MgO sample has been used as a target of sputtering process. Moreover, the MgO surface changed by ion-bombarding sputtering are also discussed with SEM photoes.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2007.11a
• /
• pp.286-286
• /
• 2007

Li이 첨가된 0.7(Ba,Sr)$TiO_3$-0.3MgO 후막 interdigital 커패시터를 연구하였다. Li이 첨가된 0.7(Ba,Sr)$TiO_3$-0.3MgO의 후막을 $Al_2O_3$ 기판 위에 형성하기 위하여 스크린 프린팅 방법을 이용하였다. $BaSrTiO_3$의 세라믹 물질은 높은 유전율(1MHz에서 500이상)과 낮은 유전 손실(1MHz에서 0.01)값을 가지고 있는 반면, $1350^{\circ}C$의 높은 온도에서 소결되는 단점이 있다. 따라서 본 연구에서는 $BaSrTiO_3$ 세라믹 물질의 유전특성을 향상시키고 $1350^{\circ}C$의 높은 소결온도를 낮추기 위해서, MgO(30wt%)와 Li(3wt%)을 $BaSrTiO_3$에 첨가하였다. 그리고 10um의 후막을 $Al_2O_3$ 기판 위에 스크린 프린팅 방법을 통해 형성한 후, 50um finger gap의 interdigital 커패시터를 Ag 전극을 이용하여 제작하였다. 샘플을 제작하기 전에, Frequency와 유전율의 상관관계를 알아보기 위해 3D simulator를 통해 시뮬레이션 하였고, 주파수와 온도별 유전 특성, 구조와 전암-전류에 대한 특성을 본 연구의 결과를 통해 토의 할 것이다.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.58 no.9
• /
• pp.1775-1777
• /
• 2009

BiSrCaCuO films were prepared on MgO single substerate at $885^{\circ}C$ by melt process. The films showed superconductivity above liquid nitrogen temperature (Tc= 96K). To investigate the effect of a melting temperature on the forming of the surface texturing, the samples were prepared under various temperature. The used powder was of high Tc phase. It is implies that the origin of the properties due to the heat treatment.

• Electrical & Electronic Materials
• /
• v.8 no.1
• /
• pp.6-12
• /
• 1995

High Tc superconducting YBa$_{2}$Cu$_{3}$$O_{7-x}$ thin films were prepared on various substrates by off-axis rf magnetron sputtering method to examine the substrate effects on the film structure and its R-T characteristics. The SEM analysis showed that the surface morphology of the grown YBa$_{2}$Cu$_{3}$O.sub 7-x/, film has different characteristic structure with different substrate used. The film on (100) SrTiO$_{3}$ substrate has critical current density of 3*10$^{5}$ A/cm$^{2}$ at 77K under zero magnetic field. The X-ray diffraction measurements revealed that the films on (100) SrTiO$_{3}$ substrate have mixed a-axis and c-axis normal to the substrate surface and the films on (100) MgO and ZrO$_{2}$/sapphire substrates have c-axis normal orientation to the substrate surface. However, YBa$_{2}$Cu$_{3}$$O_{7-x}$ films on (100) sapphire substrates showed no preferential orientation.ion.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2003.03a
• /
• pp.211-211
• /
• 2003

PbTiO$_3$ 씨앗층을 이용하여 완화형 강유전체 Pb(Mg$_{1}$3/Ta$_{2}$3/)O$_3$ (PMT) 박막의 페로브스카이트 상안정화와 열처리 조건에 따른 미세구조변화, 이에 따른 전기적 특성 변화에 관하여 조사하였다. PbTiO$_3$ 박막을 스핀코팅법으로 3000 rpm에서 20초간(111) 방향으로 배향된 Pt / Ti / SiO$_2$/ Si 기판에 증착하여 안정화된 페로브스카이트 박막을 얻었다. 이렇게 제조된 PbTiO$_3$를 Buffer 층으로 사용하고 그 위에 Pb(Mg$_{1}$3/Ta$_{2}$3/)O$_3$를 박막을 Spin coating방법으로 증착한 후, 급속열처리 방법(RTA)으로 550- $650^{\circ}C$ 사이에서 열처리하였다. 제조된 박막의 열처리 온도에 따른 미세구조 변화와 결정성을 XRD, SEM, TEM으로 분석하였고 박막의 저온 강유전 특성을 RT66A를 이용하여 평가하였다. Pb(Mg$_{1}$3/Ta$_{2}$3/)O$_3$ 박막의 경우 씨앗층이 없는 경우에는 pyrochlore상이 주상이었지만 씨앗층을 사용한 경우 페로브스카이트 상이 주상임을 확인하였고 열처리 온도가 증가할수록 페로브스카이트상의 상대적 양이 증가함을 확인하였다. 미세구조와 상의 변화에 따른 전기적 특성 변화에 관하여 자세하게 논의할 것이다.

• Journal of the Korean Institute of Telematics and Electronics D
• /
• v.34D no.2
• /
• pp.27-37
• /
• 1997

Photoluminescent and cathodoluminescent charcteristics of inorganic luminescent materials were investigated ot develop possible phosphors for thin film electroluminescent (TFEL) device applications. Mg, Zn, and Photoluminescent and cathodoluminescent charcteristics of inorganic luminescent materials were investigated ot develop possible phosphors for thin film electroluminescent (TFEL) device applications. Mg, Zn, and $Si_3N_4$ powders were used to synthesize $(Mg_xZn_{1-x})SiN_2$ host materials. $Tb_4O_7$ and $Eu_2O_3$ powdrs were added as luminescent centers. Very sharp emission spectra of $Tb^{3+}$ ions were observed from $Mg._5Zn._5SiN_2:Tb$ sampels sintered at $1400^{\circ}C$ for an hour and the maximum intensity of emission spectra occured at wavelength of 550nm (green light). Synthetic conditions of $(Mg_xZn_{1-x})SiN_2:Eu$ phosphors were optimized for the hghest luminescence. The Eu concentrations were varied from 0.2% to 1.6%. Before firing, the powders were mixed using ballmills, methanol, acetone, or D.I. water. The Mg/Zn ratio also were varied from x=0.3 to x=0.7. The maximum PL intensity was obtained from a sample with 1.2% Eu concentration and the powder was mixed with methanol and dried before firing. The maximum intensity of the emission spectra occurred t the wavelength of 470nm(blue light). TFEL devices fabricated by using sputter deposition of $(Mg._3Zn._7)SiN_2:Eu$ phosphor layer showed yellowish white emission at the phosphor field of 2MV/cm.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.02a
• /
• pp.371-372
• /
• 2012

We have studied lead-based gapless semiconductors, $PbPdO_2$, which is very sensitive to external parameters such as temperature, pressure, electric field, etc[1]. We have fabricated pure $PbPdO_2$, Co- and Mn-doped $PbPdO_2$ thin films using the pulsed laser deposition. Because of the volatile element of Pb, it is very difficult to grow the films. Note that in case of $MgB_2$, Mg is also volatile element. So in order to enhance the quality of $MgB_2$, some experiments are carried out in annealing with Mg-rich atmosphere [2]. This annealing process with volatile element plays an important role in making smooth surface. Thus, we applied such process to our studies of $PbPdO_2$ thin films. As a result, we found the optimal condition of ex-situ annealing temperature ${\sim}650^{\circ}C$ and time ~12 hrs. The ex-situ annealing brought the extreme change of surface morphology of thin films. After ex-situ annealing with PbO-rich atmosphere, the grain size of thin film was almost 100 times enlarged for all the thin films and also the PbO impurity phase was smeared out. And from X-ray diffraction measurements, we determined highly crystallized phases after annealing. So, we measured electrical and magnetic properties. Because of reduced grain boundary, the resistivity of ex-situ annealed samples changed smaller than no ex-situ sample. And the carrier densities of thin films were decreased with ex-situ annealing time. In this case, oxygen vacancies were removed by ex-situ annealing. Furthermore, we will discuss the transport and magnetic properties in pure $PbPdO_2$, Co- and Mn-doped $PbPdO_2$ thin films in detail.